{"title":"Robot Controllers","description":"\u003cp\u003eReal-time and ROS-compatible control boards with motor, sensor and communication interfaces.\u003c\/p\u003e","products":[{"product_id":"myactuator-rb-c002-robotic-cerebellum","title":"MyActuator RB-C002 Robotic Cerebellum Controller - Dual 2.5GbE, 4kHz RTOS, IgH EtherCAT Master","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/rcdrone.top\/collections\/myactuator\" title=\"MyActuator\"\u003eMyActuator\u003c\/a\u003e RB-C002 Robotic Cerebellum is a real-time robot control platform built on an IgH EtherCAT Master stack, designed for high-speed networking and deterministic motion control with Myactuator motors. It supports up to 4 kHz control frequency and provides dual 2.5GbE Ethernet interfaces for EtherCAT networking, along with rich expansion interfaces for integrating sensors and peripherals.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIgH EtherCAT Master for stable, real-time communication\u003c\/li\u003e\n\u003cli\u003eReal-time system: Ubuntu + PREEMPT_RT (RTOS-class real-time performance)\u003c\/li\u003e\n\u003cli\u003eControl frequency: up to 4 kHz\u003c\/li\u003e\n\u003cli\u003eDual 2.5GbE Ethernet interfaces\u003c\/li\u003e\n\u003cli\u003eToolchain support for PDO\/SDO mapping and debugging tools\u003c\/li\u003e\n\u003cli\u003eInterface expansion: USB 3.0, GPIO, UART, I2C, SPI\u003c\/li\u003e\n\u003cli\u003eSoftware support: ROS 2, Python, C++, Isaac\u003c\/li\u003e\n\u003cli\u003eRich software features for robot control and development support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%; border-collapse:collapse; min-width:720px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6; width:40%;\"\u003eMaster Stack\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eIgH EtherCAT Master\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eControl Frequency\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eUp to 4 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eDC Synchronization\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eSlave Type\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eMyactuator Motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eReal-Time System\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eUbuntu + PREEMPT_RT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eNetwork Interface\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eDual 2.5GbE Ethernet Interfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eHardware Platform\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eOrange Pi Development Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eMemory\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003e16 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eStorage\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003e64 GB SD card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003ePower Input\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eDC 5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003e0 C ~ 50 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eInterface Expansion\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eUSB 3.0, GPIO, UART, I2C, SPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eSoftware Support\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #e6e6e6;\"\u003eROS 2, Python, C++, Isaac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHumanoid robots\u003c\/li\u003e\n\u003cli\u003eRobotic arms\u003c\/li\u003e\n\u003cli\u003eExoskeletons\u003c\/li\u003e\n\u003cli\u003eQuadruped robots\u003c\/li\u003e\n\u003cli\u003eAGV vehicles\u003c\/li\u003e\n\u003cli\u003eARU robots\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor integration questions, documentation help, or after-sales support, contact support@rcdrone.top or visit https:\/\/rcdrone.top\/.\u003c\/p\u003e\u003ch2\u003eManuals\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/6848\/5000\/files\/Raybot_Controller_Quick_Start_Guide.pdf?v=1778498469\" rel=\"noopener\" target=\"_blank\"\u003eRaybot_Controller_Quick_Start_Guide.pdf\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"MyActuator RB-C002 Robotic Cerebellum Controller board with dual 2.5GbE, RTOS and 4 kHz real-time control highlights\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/MyActuator-RB-C002-Robotic-Cerebellum.jpg?v=1779463409\"\u003e\u003cp\u003ecaption_action: insert caption: Built for deterministic motion control, the RB-C002 combines dual 2.5GbE networking with RTOS-class real-time performance for fast EtherCAT control loops.\u003c\/p\u003e\n\u003cimg alt=\"Motor control software interface for RB-C002, with motor viewer plots, control panel settings, and motion programming tools\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/MyActuator-RB-C002-Robotic-Cerebellum_29122c2d-5ba1-4311-8622-0ce81d964106.jpg?v=1779463416\"\u003e\n\u003c\/div\u003e","brand":"MyActuator","offers":[{"title":"RB-C002 Robotic Cerebellum","offer_id":52686761623776,"sku":"MyActuator_RB_be22d2-1","price":2210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/MyActuator-RB-C002-Robotic-Cerebellum-Controller---Dual.jpg?v=1779463488"},{"product_id":"yahboom-micro-ros-control-pcb","title":"Yahboom YB-EET01-V2.0 Micro ROS Control Board for Raspberry Pi 5 Robot, ESP32-S3, ROS2","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis Micro ROS control board (MicroROS Robot Control Board) is a Raspberry Pi 5 robot expansion control board designed for ROS2 robot projects. It integrates an ESP32-S3 co-processor, 4-channel encoder motor drive, 2-channel PWM servo outputs, a laser lidar serial interface, and an onboard 6-axis IMU attitude sensor. MicroROS firmware is pre-installed before shipment for communication with devices running ROS2.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3 co-processor for MicroROS:\u003c\/strong\u003e supports MicroROS development and can be used in WiFi-UDP LAN mode or serial communication mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry Pi 5 PD power support:\u003c\/strong\u003e Type-C power interface supports Raspberry Pi 5 (5.1V\/5A) PD power supply protocol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobot I\/O integration:\u003c\/strong\u003e 4-channel motor drive with encoder speed measurement, two PWM servo interfaces, lidar communication interface, buzzer, LED indicators, and custom buttons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple communication methods:\u003c\/strong\u003e WiFi-UDP and serial port; also supports WiFi, Bluetooth, and I2C communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLidar and motor wiring attention:\u003c\/strong\u003e lidar\/motor equipment must match the board’s interface and line sequence; MS200 lidar and 310 motor are recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eROS version:\u003c\/strong\u003e supports ROS2 only (not ROS1). Includes ROS2 function package and MicroROS tutorials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal antenna included:\u003c\/strong\u003e external gain antenna provided to enhance wireless signal reliability for WiFi and Bluetooth communication (IPEX 1st generation interface).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMicro ROS control board \/ Raspberry Pi 5 robot expansion control board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBoard marking (model)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYB-EET01-V2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eROS support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eROS2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMicroROS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWiFi-UDP (LAN), Serial port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOther communications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWiFi, Bluetooth, I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor drive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMotor x4 (4-channel), encoder speed measurement x4; supports PID speed control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eServo outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePWM servo interface x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLidar interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLaser lidar serial interface x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUART port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-channel UART (can connect WiFi camera module \/ ESP32 WiFi camera module)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIMU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6-axis IMU attitude sensor (3-axis accelerometer + 3-axis gyroscope)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIMU I2C communication speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400KHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIMU data read rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCustom GPIO\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCustom GPIO x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIndicators \u0026amp; alerts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLED indicator light x2, buzzer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended motor voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eType-C; supports Raspberry Pi 5 (5.1V\/5A) PD power supply protocol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIPEX antenna 1st generation interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eESP32 Module (onboard)\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eESP32 model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eESP32-S3-WROOM-1U-N4R2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKernel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXtensa LX7 32-bit dual-core microprocessor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain frequency clock\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e240MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of pins\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of GPIOs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSPI, I2S, I2C, UART, USB OTG, SDIO, JTAG, DVP, LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSRAM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e512KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eROM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e384KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePSRAM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlash\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3V~3.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWiFi\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.11 b\/g\/n; 2.4 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBluetooth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV5.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40~85C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInterface Line Sequences (as labeled)\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLidar connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMX1.25MM-4P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLidar pin sequence\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5V, GND, TX, RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePH2.0MM-6P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor interface line sequence\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eH1B, H1A, 3V3, GND, M1-, M1+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote communication mode:\u003c\/strong\u003e PC virtual machine communicates through WiFi-UDP within the LAN to develop ROS robot applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevelopment board connection mode:\u003c\/strong\u003e Raspberry Pi 5 \/ RDK series board \/ Jetson series board connect via serial communication for ROS robot application development.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32 mode:\u003c\/strong\u003e can be used as an ESP32 development board for ROS robots.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor compatibility and wiring questions before purchase, contact support@rcdrone.top or visit https:\/\/rcdrone.top\/.\u003c\/p\u003e\u003ch2\u003eManuals\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eTutorials: \u003ca href=\"http:\/\/www.yahboom.net\/study\/MicroROS-Board\" rel=\"noopener\" target=\"_blank\"\u003ehttp:\/\/www.yahboom.net\/study\/MicroROS-Board\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"ROS Series robotics lineup graphic with multiple Yahboom ROS robot platforms and a “View more” prompt\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Yahboom-YB-EET01-V20-Micro-ROS-Control-Board-for-Raspberry_43cdb38d-bc66-476d-8c78-495d95987869.webp?v=1782275586\"\u003e\u003cp\u003eExplore Yahboom ROS-series robot platforms that can be built around compatible ROS2 control hardware.\u003c\/p\u003e\n\u003cimg alt=\"MicroROS-Pi5 Raspberry Pi 5 robot car banner highlighting AI recognition, ROS2 and SLAM mapping navigation\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot.jpg?v=1782275108\"\u003e\u003cp\u003eBuild a Raspberry Pi 5 robot car that communicates with ROS2 for tasks like SLAM mapping and navigation.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-EET01-V2.0 Micro ROS robot control board with ESP32-S3, motor\/servo connectors and onboard IMU\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_8fc742e2-a3f1-406d-9b82-3aefae385c58.jpg?v=1782275114\"\u003e\u003cp\u003eThe YB-EET01-V2.0 integrates an ESP32-S3 co-processor and onboard 6-axis IMU for MicroROS communication with ROS2.\u003c\/p\u003e\n\u003cimg alt=\"Product advantages list for the MicroROS robot control board: WiFi-UDP\/serial, 4 motor drive, encoder, IMU, lidar\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_0bef7cfb-d7bc-4537-8e8d-c2025ba087b4.jpg?v=1782275120\"\u003e\u003cp\u003eWiFi-UDP and serial communication options are supported alongside motor, encoder, IMU, and lidar interfaces.\u003c\/p\u003e\n\u003cimg alt=\"Product introduction graphic with top view of Yahboom YB-EET01-V2.0 MicroROS control board connectors and labeling\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_d0ada24d-3763-4ea9-843c-4e947c0e35a2.jpg?v=1782275126\"\u003e\u003cp\u003ePre-installed MicroROS firmware helps connect the control board to a ROS2 environment with minimal setup.\u003c\/p\u003e\n\u003cimg alt=\"Three application methods graphic: remote WiFi LAN mode, development board connection mode, and ESP32 mode\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_070db1fb-7f21-43a4-a67c-ad24dff108fe.jpg?v=1782275132\"\u003e\u003cp\u003eChoose between WiFi LAN remote communication, direct development-board connection, or using the ESP32 mode for ROS projects.\u003c\/p\u003e\n\u003cimg alt=\"MicroROS development architecture and “Onboard ESP32 processor” graphic highlighting ESP32-S3 MicroROS support\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_df10f70e-c585-46a0-ac9a-b19a4e6c2fad.jpg?v=1782275138\"\u003e\u003cp\u003eESP32-S3 onboard processing enables MicroROS development and flexible connectivity for ROS2 robot applications.\u003c\/p\u003e\n\u003cimg alt=\"Support ROS2 system graphic with a laptop display and the MicroROS control board next to a ROS2 logo\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_984cdfac-cff1-403d-a05c-4ce8c65a9922.jpg?v=1782275144\"\u003e\u003cp\u003eFull ROS2 system support is emphasized, with related documentation and technical support resources.\u003c\/p\u003e\n\u003cimg alt=\"Multiple communication methods graphic featuring WiFi-UDP remote communication with PC virtual machine, Raspberry Pi, and Jetson\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_dfeba5f7-ecc4-4e39-94b1-c7c9837092b7.jpg?v=1782275150\"\u003e\u003cp\u003eRemote communication over WiFi-UDP can be used with a PC virtual machine, Raspberry Pi, or Jetson-based setup.\u003c\/p\u003e\n\u003cimg alt=\"Serial communication wiring diagram for connecting the MicroROS control board to Raspberry Pi 5 or Jetson Nano\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_3fce35d1-cb04-4557-9f3a-8266cf1922a2.jpg?v=1782275155\"\u003e\u003cp\u003eSerial mode provides a direct connection option to Raspberry Pi 5, with a separate external power note for Jetson Nano.\u003c\/p\u003e\n\u003cimg alt=\"ROS robot control board comparison table contrasting ESP32 MicroROS board vs STM32 ROS robot control board features\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_29d35f18-9c53-4593-ae40-84dfb5ff33a5.jpg?v=1782275161\"\u003e\u003cp\u003eA side-by-side comparison helps clarify differences in ROS support, interfaces, and communication methods.\u003c\/p\u003e\n\u003cimg alt=\"Onboard 6-axis IMU attitude sensor graphic noting I2C 400kHz, 400Hz read rate, and ROS visualization examples\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_7396b810-a65c-4dfe-a0b5-990febab3119.jpg?v=1782275168\"\u003e\u003cp\u003eThe onboard 6-axis IMU supports high-speed I2C communication and frequent data updates for posture visualization in ROS.\u003c\/p\u003e\n\u003cimg alt=\"External gain antenna connected to the MicroROS control board via IPEX interface for improved WiFi\/Bluetooth signal\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_b3f11f99-7c8e-400a-8031-bf04cee0530d.jpg?v=1782275173\"\u003e\u003cp\u003eAn external gain antenna is included to improve wireless reliability for WiFi and Bluetooth communication.\u003c\/p\u003e\n\u003cimg alt=\"Onboard lidar serial port interface with wiring pinout labels (5V, GND, TX, RX) and MX1.25mm-4P connector\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_98c8fa3b-9d43-4311-92aa-7a721b09f9c0.jpg?v=1782275179\"\u003e\u003cp\u003eA dedicated laser lidar serial interface with clear pin sequencing helps simplify lidar integration for ROS2 robots.\u003c\/p\u003e\n\u003cimg alt=\"4-channel motor driver with encoder support wiring example and PH2.0mm-6P motor interface line sequence\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_3fbfd2cb-9dfb-435d-a1cf-93053156bdc1.jpg?v=1782275185\"\u003e\u003cp\u003eDrive up to four encoder motors and keep wiring aligned with the labeled connector sequence for stable control.\u003c\/p\u003e\n\u003cimg alt=\"Banner promoting M310 motor purchase link with small motor icon and “click to buy” callout\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot.webp?v=1782275190\"\u003e\u003cimg alt=\"2-channel 5V PWM servo support graphic with a servo gimbal connected to the MicroROS control board\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_a377f6ef-f92f-43c0-8895-7e30fa6c13c0.jpg?v=1782275196\"\u003e\u003cp\u003eTwo 5V PWM servo outputs support common servo-driven modules such as small gimbals.\u003c\/p\u003e\n\u003cimg alt=\"Banner promoting 5V PWM servo (9g\/SG90) purchase link with “click to buy” callout\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_3b1a742e-6371-42e4-ae6f-ce018fb4dd8e.webp?v=1782275201\"\u003e\u003cimg alt=\"Yahboom micro ROS2 control board with connected WiFi camera module and onboard connectors\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_c042ec6d-80dd-4e1d-86ed-fbeabd3902e4.jpg?v=1782275207\"\u003e\u003cp\u003eThe micro ROS2 control board connects to an ESP32 WiFi camera module via its onboard GPIO interface for camera integration.\u003c\/p\u003e\n\u003cimg alt='Banner message: \"If you need ROS2 WiFi camera module, click to buy\" with a small camera icon' loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_203e6bfe-0c69-49c5-8373-d17e09ecea47.webp?v=1782275213\"\u003e\u003cp\u003eA ROS2 WiFi camera module is available as an optional add-on for compatible Raspberry Pi robot builds.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-EET01-V2.0 micro ROS control board with labeled ports and 5.1V\/5A power supply output\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_bf2fb525-780d-4d27-b694-8fead7774dc0.jpg?v=1782275220\"\u003e\u003cp\u003eThe YB-EET01-V2.0 control board includes a 5.1V\/5A power supply system with anti-reverse, short-circuit, and over-current protection.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom micro ROS control board diagram showing Raspberry Pi 5 stack install and 5V\/5A power supply support\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_2d1ec5ee-47bb-4425-a18c-c3900302ef60.jpg?v=1782275226\"\u003e\u003cp\u003eThe Yahboom micro ROS control board supports the Raspberry Pi 5 power supply protocol and a stackable layout with 5V\/5A power input.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom Micro ROS control board for Raspberry Pi 5 with ESP32-S3 module and open-source materials text\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_db7a5bb1-8ee2-4314-8922-2cc9a704e9dc.jpg?v=1782275232\"\u003e\u003cp\u003eOpen-source materials and code support Micro ROS2 development routines such as motor driving, PWM servo control, and sensor reading.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom Micro ROS board gift info graphic with tutorial link and course folders for ESP32 and micro-ROS\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_33eef890-20fe-4bca-87d7-cff2cfd919c7.jpg?v=1782275238\"\u003e\u003cp\u003eYahboom provides a tutorial link and downloadable course files for ESP32 basics and micro-ROS to support setup and learning.\u003c\/p\u003e\n\u003cimg alt=\"ROS2 basic course folders and video tutorials with English subtitles, plus robot basic course materials\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_8f2d9a7e-cd7a-4af8-bb8d-05922453ddf2.jpg?v=1782275245\"\u003e\u003cp\u003eROS2 basic course files, English-subtitled video tutorials, and a robot basics course provide structured learning resources for ROS2 projects.\u003c\/p\u003e\n\u003cimg alt=\"Application scenarios showing Micro ROS and Raspberry Pi 5 robot cars using the Yahboom YB-EET01-V2.0 control board\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_7e641c3b-695a-4ee0-93bb-7e13cd1a6254.jpg?v=1782275250\"\u003e\u003cp\u003eThe Yahboom YB-EET01-V2.0 Micro ROS control board is used in Micro ROS and Raspberry Pi 5 robot car builds for ROS2-based projects.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-EET01-V2.0 micro ROS control board labeled with motor, battery, USB-C, PWM servo, and ESP32-S3 interfaces\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_cc73059f-3e46-4d74-8f09-dc07debd97ea.jpg?v=1782275256\"\u003e\u003cp\u003eThe YB-EET01-V2.0 board provides labeled connectors for battery charging, motor outputs, USB-C power\/serial, PWM servos, LiDAR, and an ESP32-S3 module.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom ESP32-S3 micro-ROS control board size diagram with 85×56 mm dimensions and connector layout\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_0d4ad418-014b-48e9-8450-0d4333cd9c96.jpg?v=1782275262\"\u003e\u003cp\u003eThe ESP32-S3 micro-ROS control board measures about 85×56 mm and includes labeled motor, servo, and sensor interface connections plus RESET\/BOOT buttons.\u003c\/p\u003e\n\u003cimg alt=\"Shipping list for Yahboom ESP32 microROS robot control board with USB‑C cable, Type‑C power lead, antenna, posts and screws\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Micro-ROS-Control-board-for-Raspberry-Pi-5-robot_d69b2fa3-2f65-40da-9c09-755ac47d35d5.jpg?v=1782275267\"\u003e\u003cp\u003eThe package includes the ESP32 microROS robot control board along with a USB‑C data cable, a double‑ended Type‑C power cable, an antenna, and mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Yahboom","offers":[{"title":"Default Title","offer_id":53136184443104,"sku":"6000301558-1","price":81.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/MicroROS_Control_Board_Yahboom_01.jpg?v=1782127522"},{"product_id":"yahboom-ros-v3-control-board","title":"Yahboom YB-ERF01 V3.0 ROS Robot Control Board, STM32F103RCT6, for Raspberry Pi 5\/Jetson\/RDK X3","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis ROS robot control board (V3.0) is a robot expansion\/control board designed for ROS robot cars and mobile robot projects, and it also works as an STM32 core development board. It integrates an STM32 core control unit and an on-board 9-axis IMU attitude sensor, and provides interfaces for 4-channel encoder motors, 4-channel PWM servos, serial bus servos, and RGB light bars. It supports communication and power cooperation with Raspberry Pi 5 (including Raspberry Pi 5 power supply protocol), Jetson series boards, RDK series boards (including RDK X3), and industrial computers.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoard version: V3.0 (third-generation upgrade).\u003c\/li\u003e\n\u003cli\u003eSupports ROS1 and ROS2; provides ROS1\/ROS2 function package and SDKs for both systems (as stated by the manufacturer).\u003c\/li\u003e\n\u003cli\u003eOn-board 9-axis IMU attitude sensor (V3.0 upgrade uses the ICM20948 solution).\u003c\/li\u003e\n\u003cli\u003eSTM32 core control unit with STM32F103RCT6 MCU.\u003c\/li\u003e\n\u003cli\u003eMotor control: 4-channel motor interface, supports 4-channel encoder motors, and supports 4-channel encoder speed reading; PID can be used for motor speed control (as stated).\u003c\/li\u003e\n\u003cli\u003eServo control: 4-channel PWM servo interface; supports serial bus servo. The single-channel serial bus servo interface supports cascading up to 6 serial bus servos (as stated).\u003c\/li\u003e\n\u003cli\u003eCommunication methods: USB serial communication, CAN bus communication, SBUS bus communication.\u003c\/li\u003e\n\u003cli\u003eVehicle structure support (as stated): 2-wheel drive, 4-wheel drive, Mecanum wheel, Ackerman steering.\u003c\/li\u003e\n\u003cli\u003eProtections (as stated): short-circuit protection, over-current protection, reverse-connection protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eROS robot control board \/ STM32 ROS robot expansion board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVersion\u003c\/td\u003e\n\u003ctd\u003eV3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard marking\u003c\/td\u003e\n\u003ctd\u003eYB-ERF01-V3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCU model\u003c\/td\u003e\n\u003ctd\u003eSTM32F103RCT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCU kernel\u003c\/td\u003e\n\u003ctd\u003eCortex M3 R1P1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO quantity\u003c\/td\u003e\n\u003ctd\u003e51\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface resources (MCU)\u003c\/td\u003e\n\u003ctd\u003e2 x SPI, 3 x USART, 2 x I2C, 2 x I2S, 1 x CAN, 51 x I\/O, 2 x DAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimer\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Flash\u003c\/td\u003e\n\u003ctd\u003e256KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSRAM\u003c\/td\u003e\n\u003ctd\u003e48KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage range\u003c\/td\u003e\n\u003ctd\u003eExternal voltage: 2.0-3.6V; Core voltage: 1.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin package\u003c\/td\u003e\n\u003ctd\u003eLQFP64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompilation tools\u003c\/td\u003e\n\u003ctd\u003eKEIL MDK, STM32CubeMX etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIMU\u003c\/td\u003e\n\u003ctd\u003e9-axis IMU attitude sensor (V3.0: ICM20948 solution)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIMU I2C communication rate\u003c\/td\u003e\n\u003ctd\u003e100kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIMU data read rate\u003c\/td\u003e\n\u003ctd\u003e100Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of sensor axes\u003c\/td\u003e\n\u003ctd\u003e9Axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor interfaces\u003c\/td\u003e\n\u003ctd\u003e4-channel motor interface; supports 4-channel encoder motors; 4-channel encoder speed reading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eServo interfaces\u003c\/td\u003e\n\u003ctd\u003e4-channel PWM servo interface; single-channel serial bus servo interface (supports cascade up to 6PCS serial bus servos)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eUSB serial communication; CAN bus communication; SBUS bus communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower output (as shown)\u003c\/td\u003e\n\u003ctd\u003e5.1V\/5A power supply to Raspberry Pi 5 (Raspberry Pi 5 power supply protocol)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB peripheral current note (as stated)\u003c\/td\u003e\n\u003ctd\u003eWhen Raspberry Pi 5 detects the exclusive power supply protocol, peripheral USB current increases to 1.6A; otherwise it is limited to 0.6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply interface output (as shown)\u003c\/td\u003e\n\u003ctd\u003eJetson Nano B01 (5V); Raspberry Pi 5 \/ RDK series (5V); Power supply for external devices (12V); Jetson Xavier NX \/ Jetson Orin Nano \/ Jetson Orin NX (12V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad current limit note (as stated)\u003c\/td\u003e\n\u003ctd\u003eWhen using the DC5.5*2.1 interface and Type-C interface 5V output power supply at the same time, the total load current cannot exceed 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eROS robot car driver\/expansion board for mobile robots\u003c\/li\u003e\n\u003cli\u003eEncoder motor + PID speed control projects (4-channel)\u003c\/li\u003e\n\u003cli\u003eServo and serial bus servo control for robotic steering, pan\/tilt, and actuators\u003c\/li\u003e\n\u003cli\u003eCAN \/ USB serial \/ SBUS integration for robotics control systems\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi 5, Jetson series, RDK series (RDK X3) robotics controller expansions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManuals\u003c\/h2\u003e\u003cp\u003eTutorial: \u003ca href=\"http:\/\/www.yahboom.net\/study\/ROS-Driver-Board\" rel=\"noopener\" target=\"_blank\"\u003ehttp:\/\/www.yahboom.net\/study\/ROS-Driver-Board\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eFor compatibility, wiring, and project integration questions, contact \u003ca href=\"https:\/\/rcdrone.top\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/rcdrone.top\/\u003c\/a\u003e or email support@rcdrone.top.\u003c\/p\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"ROS robotics project examples for mobile robots compatible with the Yahboom YB-ERF01 V3.0 control board\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support.jpg?v=1782262176\"\u003e\u003cp\u003eBuild ROS robot cars and mobile robots across common chassis styles, from small rovers to multi-leg platforms.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-ERF01 V3.0 STM32 ROS robot expansion board with onboard 9-axis IMU and multiple I\/O ports\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_120c277d-65af-4c47-93d1-3d1af3797e96.jpg?v=1782262181\"\u003e\u003cp\u003eA single control board combines the STM32 core controller and a 9-axis IMU for motion and attitude sensing in ROS projects.\u003c\/p\u003e\n\u003cimg alt=\"Top view of YB-ERF01-V3.0 ROS robot control board showing layout and third-generation upgrade (V3.0)\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_4ba83ad4-494c-408f-b0af-78f7f8655259.jpg?v=1782262187\"\u003e\u003cp\u003eThe V3.0 revision updates the hardware platform while keeping a compact layout for stacking with host computers.\u003c\/p\u003e\n\u003cimg alt=\"YB-ERF01 V3.0 feature overview highlighting STM32 control, 9-axis IMU, motor\/servo ports, and protection circuits\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_788922b6-5f89-48cf-8339-eff71eacc9eb.jpg?v=1782262194\"\u003e\u003cp\u003eMotor, servo, and communication interfaces are supported alongside built-in protections such as reverse-connection and over-current safeguards.\u003c\/p\u003e\n\u003cimg alt=\"YB-ERF01 V3.0 ROS robot control board upgrade comparison graphic for V1.0, V2.0, and V3.0 features\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_c4c8ddaf-5d97-437e-a484-eb3a45fa60ca.jpg?v=1782262199\"\u003e\u003cp\u003eVersion comparison details the added Raspberry Pi 5 power protocol support and the upgraded 9-axis IMU solution in V3.0.\u003c\/p\u003e\n\u003cimg alt=\"Raspberry Pi 5 power supply protocol support diagram for YB-ERF01 V3.0, showing 5.1V\/5A power delivery behavior\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_4eca0b7e-4f0f-4676-9cd5-9ac73c82a397.jpg?v=1782262205\"\u003e\u003cp\u003eRaspberry Pi 5 power cooperation helps deliver stable power to USB peripherals when used with the compatible supply protocol.\u003c\/p\u003e\n\u003cimg alt=\"STM32F103RCT6 MCU highlights for YB-ERF01 V3.0, showing Cortex-M3 core and interface resources table\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_6a04c45c-b6fc-4a45-95e1-f394c358a2d8.jpg?v=1782262212\"\u003e\u003cp\u003eThe onboard STM32F103RCT6 provides ample GPIO and common buses for robotics control and peripheral expansion.\u003c\/p\u003e\n\u003cimg alt=\"ROS1 and ROS2 compatibility graphic for the YB-ERF01 V3.0 board with Raspberry Pi, Jetson, and RDK host platforms\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_877ec435-6074-4463-8dd7-5c0e74c94ce0.jpg?v=1782262218\"\u003e\u003cp\u003eROS1 and ROS2 development is supported across popular hosts such as Raspberry Pi, Jetson, and RDK series boards.\u003c\/p\u003e\n\u003cimg alt=\"Stacked installation example of the expansion board with Raspberry Pi 5 and Jetson development boards using Type‑C\/USB links\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_86b20486-e52a-45ea-a239-9ce217b1233d.jpg?v=1782262223\"\u003e\u003cp\u003eStacking and cabling examples illustrate how the board connects for power and data with Raspberry Pi and Jetson platforms.\u003c\/p\u003e\n\u003cimg alt=\"RDK series stacked installation example with the ROS expansion board connected by Type‑C, including RDK X3 support\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_4b68308c-6348-46bb-acfe-99d632ab2227.jpg?v=1782262229\"\u003e\u003cp\u003eRDK series integration includes stacked mounting and Type‑C connection options for power and communication.\u003c\/p\u003e\n\u003cimg alt=\"Communication interfaces on YB-ERF01 V3.0: USB serial, CAN bus, and SBUS bus connectors shown close-up\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_a8e18add-650a-480c-a845-9fb84f001718.jpg?v=1782262235\"\u003e\u003cp\u003eChoose between USB serial, CAN bus, or SBUS to match the control and telemetry needs of your robot platform.\u003c\/p\u003e\n\u003cimg alt=\"On-board 9-axis IMU details for YB-ERF01 V3.0, listing 100kHz I2C, 100Hz read rate, and ROS visualization views\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_b2361199-0604-494f-9879-5286ef0911e9.jpg?v=1782262241\"\u003e\u003cp\u003eIMU data can be used for attitude estimation and visualization in ROS during navigation and motion control.\u003c\/p\u003e\n\u003cimg alt=\"Power interface outputs and 12V input on YB-ERF01 V3.0 showing 5V outputs for Raspberry Pi\/RDK and Jetson options\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_89e2225c-dd6b-4704-8455-1e34aef8aba8.jpg?v=1782262247\"\u003e\u003cp\u003eMultiple power outputs simplify wiring for 5V host boards and 12V peripherals while using a 12V main input.\u003c\/p\u003e\n\u003cimg alt=\"Motor and servo control support on YB-ERF01 V3.0: 4-channel encoder motors plus PWM servos and serial bus servos\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_112c8625-f104-4801-8daa-596944461343.jpg?v=1782262254\"\u003e\u003cp\u003eDrive up to four encoder motors and control PWM or serial bus servos for steering, arms, and other actuators.\u003c\/p\u003e\n\u003cimg alt=\"Supported robot chassis structures icons: 2-wheel drive, 4-wheel drive, mecanum wheel, and Ackerman steering\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_2a63738f-c04f-4d01-a634-845c3f52f0fd.jpg?v=1782262259\"\u003e\u003cp\u003eFits common mobile base designs including differential drive, mecanum, and Ackerman steering layouts.\u003c\/p\u003e\n\u003cimg alt=\"Peripheral interface callouts on YB-ERF01 V3.0 board: CAN, RGB light strip, SBUS, PWM servo, serial servo, encoder motors, OLED\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_89c81fb3-b302-4e16-963a-32b9c811cc6c.jpg?v=1782262265\"\u003e\u003cp\u003eAbundant onboard interfaces make it easier to add displays, lighting, and control buses without extra adapter boards.\u003c\/p\u003e\n\u003cimg alt=\"Promotional banner link for L-type 520 encoder reduction motor accessory compatible with the robotics control setup\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support.webp?v=1782262270\"\u003e\u003cimg alt=\"Promotional banner link for 520 encoder motor accessory option for use with encoder motor interfaces\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_de6eba98-6afe-4e80-82db-1c8ab8cf639d.webp?v=1782262275\"\u003e\u003cimg alt=\"Banner with two metal gear servo motors labeled 20KG and 25KG, with text offering 15KG\/20KG\/25KG steering gear\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_8e9d7259-ecff-436f-9e53-c64aa7436944.webp?v=1782262280\"\u003e\u003cp\u003eOptional 15KG, 20KG, and 25KG steering gear servos are available for setups that need higher torque.\u003c\/p\u003e\n\u003cimg alt=\"Banner with two 15KG serial bus smart servos and the text “If you need 15KG serial bus smart servo, click to buy”.\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_a5ee8861-e903-4dda-a25a-71a52b3f96c3.webp?v=1782262285\"\u003e\u003cp\u003eA 15KG serial bus smart servo option is available for builds that need higher-torque actuation.\u003c\/p\u003e\n\u003cimg alt=\"Blue banner with a model aircraft remote controller and the text “If you need Model aircraft remote control, click to buy”\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_e4f25c14-5af7-4002-9119-504ac4461a37.webp?v=1782262290\"\u003e\u003cimg alt='Banner with RGB LED light strip and text \"If you need RGB light strips, click to buy\"' loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_b2ab11b7-39ab-4738-bbcc-b3af5eac7255.webp?v=1782262296\"\u003e\u003cp\u003eOptional RGB light strips are available to add colorful lighting to your setup.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-ERF01 V3.0 ROS robot control board with STM32, multiple JST ports, USB and power protection features\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_ee67db3e-a0fe-47af-a793-06d2f5312259.jpg?v=1782262302\"\u003e\u003cp\u003eThe YB-ERF01 V3.0 control board integrates reverse-polarity, short-circuit, and over-current protection with dual step-down power regulation for stable system power.\u003c\/p\u003e\n\u003cimg alt=\"Application scenarios collage of ROS robot car, composite robot, STM32 Ackerman racing car, and self-driving robot car\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_37212668-b3f6-4c72-be90-93fa41db70d9.jpg?v=1782262308\"\u003e\u003cp\u003eYahboom YB-ERF01 V3.0 is used in a range of builds, including ROS robot cars, multifunctional composite robots, Ackerman racing cars, and self-driving robot cars.\u003c\/p\u003e\n\u003cimg alt=\"Comparison chart of ROS robot control boards: STM32F103RCT6 vs ESP32-S3, ROS1\/ROS2 support and interfaces\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_14a41e1a-67ed-4187-8742-5e4322501a8e.jpg?v=1782262314\"\u003e\u003cp\u003eThe ROS robot control board comparison outlines key differences between the STM32F103RCT6 and ESP32-S3 options, including ROS version support and available interfaces.\u003c\/p\u003e\n\u003cimg alt='Website buttons labeled \"This product\" and \"Click to buy\" on a product page header' loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support.avif?v=1782262319\"\u003e\u003cimg alt=\"Yahboom YB-ERF01 V3.0 ROS robot control board with multi-port connectors and open-source materials banner\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_b66166ba-5a7a-43bc-bb74-ae55aa6ff5ae.jpg?v=1782262325\"\u003e\u003cp\u003eYahboom YB-ERF01 V3.0 control board comes with open-source materials and driver routines for common robot peripherals like motors, PWM servos, and sensors.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom ROS Driver Board gift information sheet with tutorial link and downloadable STM32 driver, ROS1 and ROS2 files\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_f40ee6ed-9c5d-4c39-8a8c-0ac427e2827a.jpg?v=1782262331\"\u003e\u003cp\u003eYahboom provides a tutorial link plus downloadable STM32 driver and ROS1\/ROS2 packages to support setup and development.\u003c\/p\u003e\n\u003cimg alt=\"Screenshot of Yahboom ROS course resources showing ROS1\/ROS2 folders, video tutorials with English subtitles, and documentation files\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_8e42ecfa-3757-49a5-a54a-c597db1fcaa0.jpg?v=1782262338\"\u003e\u003cp\u003eYahboom’s bundled resources include ROS1 and ROS2 basic course folders, English-subtitled video tutorials, and supporting documentation for setup and learning.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-ERF01 V3.0 ROS robot control board layout with labeled 12V\/5V power, USB-C, CAN, I2C, motor ports\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_617efdb7-3de6-4f6e-9240-f0f780c0a7f4.jpg?v=1782262343\"\u003e\u003cp\u003eThe YB-ERF01 V3.0 control board provides labeled connections for 12V\/5V power, USB data, CAN, I2C, motor outputs, and servo interfaces to simplify ROS robot wiring.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-ERF01 V3.0 ROS robot control board diagram with 85×56 mm layout and STM32F103RCT6 specs\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_dd82b625-be04-4786-a69b-4bfb5789d421.jpg?v=1782262349\"\u003e\u003cp\u003eThe YB-ERF01 V3.0 ROS robot control board uses an STM32F103RCT6 MCU and a compact 85×56 mm footprint for tidy integration with compatible Raspberry Pi and Jetson setups.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom STM32 ROS robot control board kit with micro-USB cable, Type-C lead, DC power cable and screw posts\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ROS-robot-control-board-V30-with-STM32F103RCT6-Support_ae5a6ddc-09f1-48f6-824e-42f0a06fbd66.jpg?v=1782262355\"\u003e\u003cp\u003eThe STM32 ROS robot control board kit includes a micro-USB data cable, Type‑C power cable, DC power cable, screw posts, and an optional 0.91-inch OLED display.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Yahboom","offers":[{"title":"Robot expansion board","offer_id":53136644866272,"sku":"6000101090-1","price":99.8,"currency_code":"USD","in_stock":true},{"title":"Robot expansion board+OLED","offer_id":53136644899040,"sku":"6000101090-2","price":105.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/ROS_Expansion_Board_Yahboom_01.jpg?v=1782130803"},{"product_id":"yahboom-stm32-driver-pcb","title":"Yahboom YB-EST01-V2.0 STM32F103RCT6 Driver Expansion Board for Self-balancing Robot Car (Type-C CH340K)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis STM32 \u003cstrong\u003edriver expansion board\u003c\/strong\u003e is designed for building a \u003cstrong\u003eself-balancing robot car\u003c\/strong\u003e. It combines an onboard \u003cstrong\u003eSTM32F103RCT6\u003c\/strong\u003e core control unit with a \u003cstrong\u003e2-channel encoder motor drive circuit\u003c\/strong\u003e, plus multiple expansion interfaces for sensors and modules. It supports project expansion with ultrasonic, PS2 handle, OLED display, lidar, Bluetooth, CCD camera, electromagnetic\/line tracking, and a \u003cstrong\u003eK210 visual module\u003c\/strong\u003e for AI vision-related functions. A Bluetooth app is supported for viewing robot data waveforms and adjusting PID parameters in real time to help optimize balance performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard STM32F103RCT6\u003c\/strong\u003e core MCU for balance control and development.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower input:\u003c\/strong\u003e 8V-13V wide voltage input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType-C one-click writing\/downloading:\u003c\/strong\u003e integrated \u003cstrong\u003eCH340K\u003c\/strong\u003e serial port download circuit; programs can be written directly using a Type-C data cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor control:\u003c\/strong\u003e 2-channel motor drive circuit; supports driving 2-channel motors, reading encoder data, and monitoring motor speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterfaces (onboard\/expansion):\u003c\/strong\u003e Bluetooth communication interface (supports Bluetooth 5.0 modules), PS2 handle interface, OLED display interface, lidar communication interface, ultrasonic module interface, CCD camera interface, electromagnetic line tracking interface, 4-channel line tracking module interface, K210 visual communication interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard functions:\u003c\/strong\u003e program debugging interface, active buzzer, custom button, circuit protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage detection:\u003c\/strong\u003e onboard voltage detection circuit; robot car battery voltage can be checked in real time through the Bluetooth app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety protection:\u003c\/strong\u003e reverse connection protection, over-current protection, over-voltage protection, over-heat protection, stalling protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion examples supported:\u003c\/strong\u003e ultrasonic ranging\/following\/obstacle avoidance; OLED data display (balance car data and battery voltage); 4-channel tracking sensor for right-angle turns and cross sections; K210 visual functions such as visual line tracking, color following, and image code control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If using a different motor, carefully check the motor interface wiring sequence on the driver board to ensure it matches the motor wiring sequence.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBoard name\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSTM32 Self-balancing Robot Driver Board (driver expansion board for self-balancing robot car)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBoard model marking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYahboom YB-EST01-V2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMCU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSTM32F103RCT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCore\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCortex M3 R1P1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGPIO number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e51\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTimer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Flash\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSRAM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e48KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface resources\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x SPI, 3 x USART, 2 x I2C, 2 x I2S, 1 x CAN, 51 x I\/O, 2 x DAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal voltage: 2.0-3.6V; Core voltage: 1.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePin package\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLQFP64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProgramming\/download\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eType-C; CH340K serial port download circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8V-13V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompilation tool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKEIL MDK, STM32CubeMX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSTM32 self-balancing robot car development and balance control projects\u003c\/li\u003e\n\u003cli\u003eRobot car line tracking (including electromagnetic line tracking and 4-channel tracking sensor modules)\u003c\/li\u003e\n\u003cli\u003eUltrasonic ranging\/following\/obstacle avoidance expansions\u003c\/li\u003e\n\u003cli\u003eOLED data display and real-time debugging\u003c\/li\u003e\n\u003cli\u003eK210 vision-module expansions (visual line tracking, color following, image code control)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor product selection help and after-sales support, contact \u003ca href=\"https:\/\/rcdrone.top\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/rcdrone.top\/\u003c\/a\u003e or email \u003ca href=\"mailto:support@rcdrone.top\"\u003esupport@rcdrone.top\u003c\/a\u003e.\u003c\/p\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"Self-balancing robot car platform using an STM32 control and driver expansion board, with multiple sensor options\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car.jpg?v=1782246056\"\u003e\u003cp\u003eBuild a self-balancing robot car and expand it with popular sensors and control modules as your project grows.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-EST01-V2.0 STM32F103RCT6 self-balancing robot driver expansion board, top view\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_30ab009f-6f36-4178-afdf-5eeca8bc82bc.jpg?v=1782246062\"\u003e\u003cp\u003eYB-EST01-V2.0 integrates the STM32F103RCT6 controller with motor drive and dedicated expansion interfaces for robot projects.\u003c\/p\u003e\n\u003cimg alt=\"Product intro graphic highlighting onboard STM32F103RCT6 MCU and main functional blocks of the driver board\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_9130d664-959a-487b-98e6-e79a89c48457.jpg?v=1782246068\"\u003e\u003cp\u003eAn onboard STM32F103RCT6 MCU provides the balance-control core while leaving plenty of interfaces available for add-ons.\u003c\/p\u003e\n\u003cimg alt=\"Self-balancing robot car example and board callout, plus Bluetooth app screen for onboard battery voltage detection\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_cb612106-6404-4647-97fc-3d01683a424e.jpg?v=1782246074\"\u003e\u003cp\u003eOnboard voltage detection lets you monitor robot battery voltage in real time through the supported Bluetooth app.\u003c\/p\u003e\n\u003cimg alt=\"CH340K Type-C one-click programming and safety protection icons for the STM32 robot driver board\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_b765a3f9-e7f3-40da-8a1c-8d1285aff9d1.jpg?v=1782246081\"\u003e\u003cp\u003eType‑C programming via the integrated CH340K simplifies downloading firmware, with built-in circuit protection for safer testing.\u003c\/p\u003e\n\u003cimg alt=\"Close-up of onboard OLED display interface with a small OLED connected on the STM32 driver expansion board\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_990fc2f4-ab53-4f45-a9ec-565c230d5abe.jpg?v=1782246086\"\u003e\u003cp\u003eConnect an OLED display to show balance data and battery voltage during tuning and runtime.\u003c\/p\u003e\n\u003cimg alt=\"Bluetooth module interface feature graphic with phone app controlling a self-balancing robot car\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_91a03b54-4fb1-44b2-a17b-69919a7202d7.jpg?v=1782246097\"\u003e\u003cp\u003eBluetooth module support enables remote control, waveform viewing, and real-time PID parameter adjustment in the app.\u003c\/p\u003e\n\u003cimg alt=\"Ultrasonic interface feature graphic showing robot using ultrasonic sensing for ranging and obstacle avoidance\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_8869a281-3c36-47a5-9fdb-b8d7483a18c5.jpg?v=1782246107\"\u003e\u003cp\u003eAdd an ultrasonic module for ranging, following behavior, and obstacle-avoidance experiments.\u003c\/p\u003e\n\u003cimg alt=\"MPU6050 interface feature graphic with robot car and inset showing an MPU6050 IMU module connection area\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_5efd9e96-80e1-46ed-b24f-969f36d12d53.jpg?v=1782246118\"\u003e\u003cp\u003eThe MPU6050 interface supports easy IMU expansion for motion sensing in balance projects.\u003c\/p\u003e\n\u003cimg alt=\"Robot car driving demo for 2-channel encoder motor support on the STM32 motor driver expansion board\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_e06d9d70-6ffa-42e2-b8f4-3295785a6437.jpg?v=1782246128\"\u003e\u003cp\u003eDual-channel encoder motor drive supports reading encoder feedback and monitoring motor speed for stable balance control.\u003c\/p\u003e\n\u003cimg alt=\"4-channel line tracking sensor interface feature graphic with robot following a black line path\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_9762d352-f852-4ae2-9627-c82c597c69d6.jpg?v=1782246139\"\u003e\u003cp\u003eA 4-channel tracking sensor can be connected for line following and more complex track scenarios such as turns and crossings.\u003c\/p\u003e\n\u003cimg alt=\"Banner link offering optional 4-channel tracking module purchase\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_4bf334ac-1ba4-4508-95b2-42be1b127254.avif?v=1782246144\"\u003e\u003cimg alt=\"PS2 handle interface feature graphic with gamepad controlling a self-balancing robot car\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_75d95aca-5265-43f9-a2e4-0a8a530146bb.jpg?v=1782246149\"\u003e\u003cp\u003eA PS2 handle receiver interface is available for handheld remote control during demos and testing.\u003c\/p\u003e\n\u003cimg alt=\"Banner link offering optional PS2 handle purchase\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_5ef52eaf-9990-44f5-992a-865ed46de71a.avif?v=1782246154\"\u003e\u003cimg alt=\"K210 visual module interface feature graphic showing robot performing visual recognition and visual line tracking tasks\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_4611631a-c4c2-4b96-ac3f-b6444f12847f.jpg?v=1782246160\"\u003e\u003cp\u003eUse the K210 visual module interface for AI-vision expansions such as visual line tracking, color following, and code control.\u003c\/p\u003e\n\u003cimg alt=\"Banner link offering optional K210 visual module purchase\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_ffa84ceb-9ded-4f56-b53c-f1e458c85028.avif?v=1782246165\"\u003e\u003cimg alt=\"Lidar interface feature graphic showing robot car using lidar for distance sensing and obstacle avoidance\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_f2d61591-25d6-457a-8a80-060c38fe3909.jpg?v=1782246171\"\u003e\u003cp\u003eA dedicated lidar communication interface supports distance data acquisition for obstacle avoidance and navigation behaviors.\u003c\/p\u003e\n\u003cimg alt=\"Banner link offering optional T-MINI PLUS laser radar purchase\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car.webp?v=1782246176\"\u003e\u003cimg alt=\"Yahboom STM32 driver expansion board with multiple labeled ports for motors, sensors, OLED, Bluetooth, and ultrasonic modules\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_c8b410b7-2d32-47be-b787-4e79e997b83b.jpg?v=1782246181\"\u003e\u003cp\u003eThe Yahboom YB-EST01-V2.0 expansion board provides multiple peripheral interfaces for connecting motors, encoders, OLED, Bluetooth, and common sensor modules on a self-balancing robot car build.\u003c\/p\u003e\n\u003cimg alt=\"Self-balancing robot car chassis parts kit with mounting plates, motors, wheels, standoffs and screws\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_913e4bc4-97eb-45da-9482-23885c13d737.jpg?v=1782246187\"\u003e\u003cp\u003eA self-balancing robot car chassis kit includes mounting plates, two motors with wheels, standoffs, and assorted hardware for assembly.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom YB-EST01-V2.0 STM32F103 driver expansion board layout with main control ports, Type-C USB and debug interfaces\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_14ce56a3-4e44-452f-825c-7c79adc9ada1.jpg?v=1782246193\"\u003e\u003cp\u003eThe Yahboom YB-EST01-V2.0 driver expansion board combines a main control interface with PC debugging and waveform display connections for setup and tuning.\u003c\/p\u003e\n\u003cimg alt=\"STM32 self-balancing car tutorial course outline table with code provided and sections like PID, LQR, and expansion\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_fce1ff6c-54a8-4c8c-9e67-ebc205fddcc8.jpg?v=1782246199\"\u003e\u003cp\u003eSTM32 self-balancing car tutorial materials and code are included, with course sections covering setup, expansion modules, and PID\/LQR control.\u003c\/p\u003e\n\u003cimg alt=\"Screenshot of Yahboom tutorial download folders for STM32 expansion course and robot car PID control materials\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_1d8f5808-7313-41b5-9003-532ff636287c.jpg?v=1782246205\"\u003e\u003cp\u003eYahboom’s downloadable course folders provide STM32 expansion lessons and robot car PID control resources for setup and tuning.\u003c\/p\u003e\n\u003cimg alt=\"Yahboom STM32 driver expansion board with USB‑C port, labeled headers, and mounting hole layout diagram\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_1544d0a8-6221-4fca-8ad4-921c4936f6b8.jpg?v=1782246212\"\u003e\u003cp\u003eClearly labeled headers and a USB‑C connection help simplify wiring and programming on the STM32 driver expansion board.\u003c\/p\u003e\n\u003cimg alt=\"Self-balancing robot car platform with four wheels, top mounting plate, and front ultrasonic sensor module\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_da31f66a-9d0c-4353-be97-2ee449ab0dd0.jpg?v=1782246218\"\u003e\u003cp\u003eThe YB-EST01-V2.0 driver expansion board is used in a self-balancing robot car platform with a four-wheel chassis, top mounting plate, and front ultrasonic sensor.\u003c\/p\u003e\n\u003cimg alt=\"Shipping list for Yahboom STM32 self-balancing robot car driver board kit with Type‑C cable, screws, and optional modules\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/STM32-Driver-Expansion-Board-for-Self-balancing-Robot-Car_f8f86c7c-ce5b-4f0b-81a5-f4c612064cdc.jpg?v=1782246224\"\u003e\u003cp\u003eThe kit includes the STM32 self-balancing robot car driver board with a Type‑C data cable and screw\/copper standoffs, with an expansion option adding an OLED, ultrasonic sensor, Bluetooth module, and MPU6050 board.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Yahboom","offers":[{"title":"Basic Kit","offer_id":53136793141472,"sku":"6000400500-1","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Expansion Kit","offer_id":53136793174240,"sku":"6000400500-2","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/STM32_Board_Yahboom_01_6edb0da3-8f9e-4167-abb0-abb1788a33b8.jpg?v=1782131847"}],"url":"https:\/\/rcdrone.top\/collections\/robot-controllers.oembed","provider":"RCDrone","version":"1.0","type":"link"}