{"product_id":"nano-tx-v2-module","title":"BETAFPV Nano TX V2 Transmitter Module (ExpressLRS ELRS) 2.4GHz\/915\/868MHz, 1W\/2W, TCXO","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/rcdrone.top\/collections\/betafpv\" title=\"BETAFPV\"\u003eBETAFPV\u003c\/a\u003e Nano TX V2 Module is an ExpressLRS (ELRS) transmitter module designed for stable, low-latency radio links in FPV racing and long-range flights. It features a T-LED antenna that visually indicates transmission\/reception status and antenna connection condition, plus a cooling system with an 1804 fan and heatsink for high-power operation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eT-LED antenna with built-in LED display: regular flickering indicates signal transmission\/reception; light flicker\/on = transmitting signal; light off = receiving signal. Flicker speed varies with telemetry ratio and packet rate.\u003c\/li\u003e\n\u003cli\u003e3 versions: 2.4GHz (max 1W) and 915MHz\/868MHz (max 2W). Max packet rate: F1000\/200Hz.\u003c\/li\u003e\n\u003cli\u003eIntegrated TCXO (temperature-compensated crystal oscillator) to minimize frequency deviation for stable performance.\u003c\/li\u003e\n\u003cli\u003eCooling system: optimized airflow channel + heatsink + high-speed 1804 cooling fan.\u003c\/li\u003e\n\u003cli\u003eExpressLRS V3.3 support for Backpack and custom button functions.\u003c\/li\u003e\n\u003cli\u003eWide compatibility with radios using EdgeTX V2.8.0 and OpenTX systems (CRSF).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eItem\u003c\/td\u003e\n\u003ctd\u003eBETAFPV Nano TX V2 Module | ELRS 2.4GHz\/915MHz\/868MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e28g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna connector (module)\u003c\/td\u003e\n\u003ctd\u003eRP-SMA (2.4GHz), SMA (915\/868MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRF power (2.4GHz)\u003c\/td\u003e\n\u003ctd\u003e25mW\/50mW\/100mW\/250mW\/500mW\/1000mW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRF power (915\/868MHz)\u003c\/td\u003e\n\u003ctd\u003e10mW\/25mW\/50mW\/100mW\/250mW\/500mW\/1000mW\/2000mW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacket rate (2.4GHz)\u003c\/td\u003e\n\u003ctd\u003e50Hz\/100Hz\/150Hz\/250Hz\/333Hz\/500Hz\/D250\/D500\/F500\/F1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacket rate (915\/868MHz)\u003c\/td\u003e\n\u003ctd\u003e25Hz\/50Hz\/100Hz\/100Hz Full\/200Hz\/D50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency band\u003c\/td\u003e\n\u003ctd\u003e2.4GHz ISM, 915MHz FCC, 868MHz EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackpack\u003c\/td\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e7V~13V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption (2.4GHz)\u003c\/td\u003e\n\u003ctd\u003e8V, 1000mA@1000mW, 150Hz, 1:128\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption (915\/868MHz)\u003c\/td\u003e\n\u003ctd\u003e8V, 1000mA@1000mW, 50Hz, 1:128\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB port\u003c\/td\u003e\n\u003ctd\u003eType-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan voltage\u003c\/td\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDefault firmware version\u003c\/td\u003e\n\u003ctd\u003eExpressLRS V3.3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-LED antenna connector \/ gain\u003c\/td\u003e\n\u003ctd\u003eRP-SMA\/SMA Connector | 2.0dBi (2.4GHz\/868MHz\/915MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eInterfaces \u0026amp; Controls\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSMA\/RP-SMA Port\u003c\/li\u003e\n\u003cli\u003eUSB Type-C Interface\u003c\/li\u003e\n\u003cli\u003eCooling Fan\u003c\/li\u003e\n\u003cli\u003eState Indicator Light\u003c\/li\u003e\n\u003cli\u003eButton1, Button2\u003c\/li\u003e\n\u003cli\u003eCRSF Serial Port pins: NC \/ 7V-13V \/ GND \/ CRSF Serial Port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor product selection, setup help, or after-sales support, contact support@rcdrone.top or visit https:\/\/rcdrone.top\/.\u003c\/p\u003e\u003ch2\u003eSetup (EdgeTX\/OpenTX)\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn EdgeTX: enter \u003cstrong\u003eMODEL SEL\u003c\/strong\u003e → \u003cstrong\u003eSETUP\u003c\/strong\u003e, set \u003cstrong\u003eInternal RF\u003c\/strong\u003e to \u003cstrong\u003eOFF\u003c\/strong\u003e, enable \u003cstrong\u003eExternal RF\u003c\/strong\u003e, and set output mode to \u003cstrong\u003eCRSF\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eModule configuration can be done via the ExpressLRS LUA script (elrsV3.lua). Copy elrsV3.lua to the radio SD card: \u003cstrong\u003eScripts\/Tools\u003c\/strong\u003e, then open \u003cstrong\u003eTools\u003c\/strong\u003e and run \u003cstrong\u003eExpressLRS\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCustom Buttons\u003c\/h2\u003e\u003cp\u003eTwo reserved buttons support customizable functions.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eEnter WiFi mode by enabling the module or powering it on for 60 seconds.\u003c\/li\u003e\n\u003cli\u003eOnce the RGB state indicator is slow green flashing, WiFi is active (WiFi name: \u003cstrong\u003eExpressLRS TX\u003c\/strong\u003e, password: \u003cstrong\u003eexpresslrs\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003eConnect and open \u003cstrong\u003ehttp:\/\/10.0.0.1\u003c\/strong\u003e in a browser to access custom button settings.\u003c\/li\u003e\n\u003cli\u003eSelect the function in \u003cstrong\u003eAction\u003c\/strong\u003e, then choose press type and count\/duration in \u003cstrong\u003ePress\u003c\/strong\u003e and \u003cstrong\u003eCount\u003c\/strong\u003e, then click \u003cstrong\u003eSave\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eSix settable shortcut actions:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003cli\u003eSend VTX Settings\u003c\/li\u003e\n\u003cli\u003eIncrease Power Output\u003c\/li\u003e\n\u003cli\u003eEnable WiFi\u003c\/li\u003e\n\u003cli\u003eEnter VTX Channel Menu\u003c\/li\u003e\n\u003cli\u003eEnter Binding Mode\u003c\/li\u003e\n\u003cli\u003eEnter VTX Frequency Menu\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDefault button functions:\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eButton\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eAction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePress\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCount\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003eButton1 (Left Button)\u003c\/td\u003e\n\u003ctd\u003eEnter Binding Mode\u003c\/td\u003e\n\u003ctd\u003eShort Press\u003c\/td\u003e\n\u003ctd\u003e3 Times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncrease Power\u003c\/td\u003e\n\u003ctd\u003eLong Press\u003c\/td\u003e\n\u003ctd\u003eFor 0.5 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003eButton2 (Right Button)\u003c\/td\u003e\n\u003ctd\u003eGo to VTX Channel Menu\u003c\/td\u003e\n\u003ctd\u003eShort Press\u003c\/td\u003e\n\u003ctd\u003e2 Times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSend VTX Settings\u003c\/td\u003e\n\u003ctd\u003eLong Press\u003c\/td\u003e\n\u003ctd\u003eFor 0.5 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cem\u003eNote: This transmitter hardware does not support button RGB lights.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eBinding \u0026amp; External Power Supply\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDefault firmware is ExpressLRS V3.3.0, with no Binding Phrase pre-set. Ensure the receiver is using V3.0.0 or above with no binding phrase.\u003c\/li\u003e\n\u003cli\u003eBinding: put the receiver into binding mode; quick press Button1 (Left button) three times (factory default), or use \u003cstrong\u003eBind\u003c\/strong\u003e in the LUA script. A solid indicator indicates successful binding.\u003c\/li\u003e\n\u003cli\u003eIf the module has been reflashed with a binding phrase, set the same binding phrase on the receiver for automatic binding.\u003c\/li\u003e\n\u003cli\u003eExternal power: for 500mW and above, power consumption is higher and may shorten radio usage time. Use the included Type-C male to XT30U male power cable with an XT30-USB adapter cable to connect an external 2-3S battery.\u003c\/li\u003e\n\u003cli\u003ePower consumption is related to transmit power and telemetry ratio. When using 500mW and above, a higher telemetry ratio can reduce power consumption and extend use time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eVoltage note: When the remote control battery or external battery is lower than 7V (2S) or 10.5V (3S), do not use 500mW and 1W; the module may reboot due to insufficient power supply.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eImportant Notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAssemble the antenna before powering on. Otherwise, the PA chip in the Nano TX V2 Module may be damaged permanently.\u003c\/li\u003e\n\u003cli\u003eT-LED Antenna only lights up on the Nano TX V2 Module.\u003c\/li\u003e\n\u003cli\u003eOther antennas such as Moxon and Loop can be used directly on the Nano TX V2 Module (915\/868MHz version), but the 2.4GHz version requires an RP-SMA to SMA adapter.\u003c\/li\u003e\n\u003cli\u003eLiteRadio 3 Pro Radio Transmitter cannot support 500mW due to power supply issues.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnable to enter LUA script:\u003c\/strong\u003e check Nano pin\/socket contact, upgrade LUA script to elrsV3.lua, and set radio baud rate to 400K or above (EdgeTX needs V2.8.0 or above if baud rate setting is unavailable). Target Name: \u003cstrong\u003eBETAFPV Nano V2 2.4GHz\/915MHz\/868MHz TX\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacket rate cannot be set to F1000 \/ “Baud rate is too low”:\u003c\/strong\u003e F1000 requires above 400K baud rate. Update baud rate in Model Setup or System → Hardware, then reboot the radio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF1000 enabled but packet rate is below 1000:\u003c\/strong\u003e upgrade the EdgeTX version to 2.8.0 or above.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.betafpv.com\/hc\/en-us\/articles\/27507580499993-Manual-for-Nano-TX-V2-Module\"\u003eInstruction Manual for Nano TX V2 Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.betafpv.com\/hc\/en-us\/articles\/27508958389401-Firmware-for-ELRS-Nano-V2-TX-Module-\"\u003eFirmware for Nano TX V2 Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/ExpressLRS\/Backpack\/releases\"\u003eBackpack firmware releases\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.betafpv.com\/hc\/en-us\/articles\/26955194156057-Introduction-to-ELRS-Lua-Scripts\"\u003eIntroduction to ELRS Lua Scripts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.expresslrs.org\/hardware\/crystal-frequency-error\/#\"\u003eExpressLRS TCXO \/ crystal frequency error reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 × Nano TX V2 Module\u003c\/li\u003e\n\u003cli\u003e1 × T-LED Antenna\u003c\/li\u003e\n\u003cli\u003e1 × USB to Type-C data cable\u003c\/li\u003e\n\u003cli\u003e1 × Type-C Male to XT30U Male power cable\u003c\/li\u003e\n\u003cli\u003e1 × Instruction manual\u003c\/li\u003e\n\u003cli\u003e1 × Service card\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"BETAFPV Nano TX V2 Transmitter ELRS module with T-LED antenna and compact white heatsink body\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module.jpg?v=1777529665\"\u003e\u003cp\u003eBETAFPV Nano TX V2 Transmitter brings ExpressLRS performance in a compact Nano module with a status-indicating T-LED antenna.\u003c\/p\u003e\n\u003cimg alt=\"BETAFPV Nano TX V2 module ports and controls: SMA\/RP-SMA, USB-C, buttons, fan, indicator, CRSF pins\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_82bf8d3a-b3a2-4dee-87a1-adee82eee874.jpg?v=1777529671\"\u003e\u003cp\u003eClear access to USB Type‑C, dual buttons, cooling fan, and CRSF serial pins keeps setup and maintenance straightforward.\u003c\/p\u003e\n\u003cimg alt=\"RF power comparison graphic: 2.4GHz up to 1W and 915\/868MHz up to 2W on Nano TX V2\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_d191f229-c0e3-447e-ba21-63543c530c4b.jpg?v=1777529678\"\u003e\u003cp\u003eChoose the band that fits your flying style, with high RF output options for demanding link performance.\u003c\/p\u003e\n\u003cimg alt=\"Long-range and racing use cases graphic for ELRS 2.4GHz, 915MHz, and 868MHz versions\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_2b424992-2932-4d1c-8927-3a59d74e812a.jpg?v=1777529685\"\u003e\u003cp\u003eBuilt for stable link quality across noisy environments, long-range flights, and FPV racing sessions.\u003c\/p\u003e\n\u003cimg alt=\"T-LED antenna close-up with LED status behavior for transmit\/receive indication on Nano TX V2\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module.png?v=1777529699\"\u003e\u003cp\u003eThe T‑LED antenna provides an at-a-glance indication of transmission and reception status while you fly.\u003c\/p\u003e\n\u003cimg alt=\"Cooling system cutaway showing airflow channel, heatsink, and high-speed 1804 fan inside the module\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_b6648914-c7bd-49d5-9ea3-00b00e8ca961.jpg?v=1777529708\"\u003e\u003cp\u003eAn active cooling design with heatsink and fan helps maintain stable output during higher power operation.\u003c\/p\u003e\n\u003cimg alt=\"Module front view highlighting Backpack support and customizable buttons on the BETAFPV Nano TX V2\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_2fba48fd-f0d1-4079-8059-f81ac5b756e7.jpg?v=1777529719\"\u003e\u003cp\u003eBackpack support plus two customizable buttons adds flexibility for controls and external device functions.\u003c\/p\u003e\n\u003cimg alt=\"Wide compatibility banner with radios supporting EdgeTX v2.8.0 and OpenTX using CRSF external module mode\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_e2852c61-dd41-43ed-a093-bc9efe769d8f.jpg?v=1777529728\"\u003e\u003cimg alt=\"ExpressLRS product lineup image including transmitter modules, receivers, antennas, and accessories\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_92b6336c-6aaa-428e-850c-8d0eff16986f.jpg?v=1777529737\"\u003e\u003cp\u003ePart of the ExpressLRS ecosystem, making it easy to match the module with compatible receivers and accessories.\u003c\/p\u003e\n\u003cimg alt=\"EdgeTX model setup screen highlighting CRSF option for configuring an external RF module\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module.avif?v=1777529745\"\u003e\u003cp\u003eIn EdgeTX\/OpenTX, set Internal RF to OFF and select CRSF for External RF to use the module.\u003c\/p\u003e\n\u003cimg alt=\"Radio tools menu with Download LUA Script option for ExpressLRS configuration\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_195083ac-060d-4384-b19a-759643132bd6.avif?v=1777529755\"\u003e\u003cp\u003eThe ExpressLRS LUA tools provide quick access to key configuration and update functions from the radio.\u003c\/p\u003e\n\u003cimg alt=\"ExpressLRS LUA script screen titled “BFPV Nano TX V2” showing module settings menu\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_5d2ac17b-9fad-4321-b8b0-cdd1b319a246.avif?v=1777529761\"\u003e\u003cimg alt=\"Binding mode instruction: press the Nano TX V2 key three times to enter bind mode\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_f8284b88-2c32-42b0-971e-fd15ef30c798.jpg?v=1777529768\"\u003e\u003cp\u003eBinding can be triggered directly from the module using the button press sequence.\u003c\/p\u003e\n\u003cimg alt=\"External power wiring diagram using XT30-to-USB adapter cable and 2–3S external battery connection\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_1462023e-621e-45b7-a776-14907cf481c2.jpg?v=1777529777\"\u003e\u003cp\u003eOptional external \u003ca href=\"https:\/\/rcdrone.top\/collections\/drone-battery\" title=\"Drone Battery\"\u003ebattery\u003c\/a\u003e power can be used with an XT30-to-USB adapter cable when needed.\u003c\/p\u003e\n\u003cimg alt=\"Radio screen displaying “Loading…” during ExpressLRS LUA script startup\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_380bb5bd-6b47-4964-8cf6-8f39b1a67773.avif?v=1777529783\"\u003e\u003cimg alt=\"EdgeTX warning “Baud rate too low” and external RF CRSF settings screen with baud rate configuration\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_96772485-add7-4cb7-9929-1eb39756c9c0.avif?v=1777529792\"\u003e\u003cp\u003eIf a baud rate warning appears, confirm the External RF is set to CRSF and adjust baud rate per your radio setup.\u003c\/p\u003e\n\u003cimg alt=\"ExpressLRS LUA script screen header “BFPV Nano TX V2” with menu page indicator\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_e265233b-99bf-41fc-8127-beb051abd304.avif?v=1777529799\"\u003e\u003cimg alt=\"In-the-box contents: BETAFPV Nano TX V2 module, T-LED antenna, USB cable, wire harness, manual, packaging\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-Nano-TX-V2-Module_7507f12f-4cd4-4668-8d89-30dd74d08e19.jpg?v=1777529805\"\u003e\u003cp\u003eEverything needed to get started is included: module, antenna, cables, and documentation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BETAFPV","offers":[{"title":"ELRS 2.4GHz","offer_id":52393125708000,"sku":"01070010_1-1","price":62.99,"currency_code":"USD","in_stock":true},{"title":"ELRS 915MHz","offer_id":52393125740768,"sku":"01070010_1-2","price":62.99,"currency_code":"USD","in_stock":true},{"title":"ELRS 868MHz","offer_id":52393125773536,"sku":"01070010_1-3","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/2.4G_8eb429cc-cf38-47fe-a926-95b2111053d1.jpg?v=1777476664","url":"https:\/\/rcdrone.top\/products\/nano-tx-v2-module","provider":"RCDrone","version":"1.0","type":"link"}