{"product_id":"src-174-returner-3-6s-32bit-am32-60a-4in1-esc-v1","title":"BrotherHobby Returner 3-6S 32Bit AM32 60A 4-in-1 ESC V1, TVS, Current Sensor, 30.5x30.5mm","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/rcdrone.top\/collections\/brotherhobby\" title=\"BrotherHobby\"\u003eBrotherHobby\u003c\/a\u003e Returner 3-6S 32Bit AM32 60A (4-in-1) ESC V1 is a 4-in-1 electronic speed controller designed for 3S to 6S builds. It adopts a high-performance 32-bit ARM microprocessor with a running frequency of up to 120MHz and supports PWM and DSHOT signal protocols.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-performance 32-bit ARM microprocessor (up to 120MHz)\u003c\/li\u003e\n\u003cli\u003e6-layer board design with 2OZ copper thickness\u003c\/li\u003e\n\u003cli\u003e32-bit main control chip paired with a 6288 driver chip\u003c\/li\u003e\n\u003cli\u003eTVS transient suppression diode\u003c\/li\u003e\n\u003cli\u003eIncludes 1000uF\/35V high-frequency low resistance filtering capacitor\u003c\/li\u003e\n\u003cli\u003eImported SMT filter capacitors for improved filtering and reduced circuit interference\u003c\/li\u003e\n\u003cli\u003eUsing 24 high-power MOSFET\u003c\/li\u003e\n\u003cli\u003eEquipped with a current detector \/ current meter\u003c\/li\u003e\n\u003cli\u003eIndependent solder pads for easier soldering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003e3-6S 32Bit 60A(4IN1) ESC V1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget firmware\u003c\/td\u003e\n\u003ctd\u003eAT32F421_BRH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComputer end ground station link\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/esc-configurator.com\/\" rel=\"nofollow\"\u003ehttps:\/\/esc-configurator.com\/\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParameter tuning software\u003c\/td\u003e\n\u003ctd\u003eEsc_Config_Tool_1.82\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous current\u003c\/td\u003e\n\u003ctd\u003e60A*4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Current\u003c\/td\u003e\n\u003ctd\u003e70A(10S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal capacitor\u003c\/td\u003e\n\u003ctd\u003e1000uF\/35V High frequency low resistance capacitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESC treaty\u003c\/td\u003e\n\u003ctd\u003ePWM\/DSHOT 300\/600\/1200\/2400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Power\u003c\/td\u003e\n\u003ctd\u003e3S-6S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput voltage\u003c\/td\u003e\n\u003ctd\u003eVBAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent meter\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting pattern\u003c\/td\u003e\n\u003ctd\u003e30.5x30.5mm (hole diameter 4mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e52mm x 44mm x 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeigh\u003c\/td\u003e\n\u003ctd\u003e13.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eInterface Definition\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGND: The ground wire is the negative pole of the power supply\u003c\/li\u003e\n\u003cli\u003eVCC: Battery voltage detection signal output interface, connected to flight control battery voltage detection port, output specification is battery voltage.\u003c\/li\u003e\n\u003cli\u003eM1: Input interface for throttle signal, corresponding to No.1 ESC.\u003c\/li\u003e\n\u003cli\u003eM2: Input interface for throttle signal, corresponding to No.2 ESC.\u003c\/li\u003e\n\u003cli\u003eM3: Input interface for throttle signal, corresponding to No.3 ESC.\u003c\/li\u003e\n\u003cli\u003eM4: Input interface for throttle signal, corresponding to No.4 ESC.\u003c\/li\u003e\n\u003cli\u003eCUR: Current detection signal output interface, connected to the flight control current detection port.\u003c\/li\u003e\n\u003cli\u003eNC: No defined pins, no input\/output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3-6S 32Bit 60A(4IN1) ESC V1 Electronic Speed Controller x1\u003c\/li\u003e\n\u003cli\u003eM3*8mm silicone case x5\u003c\/li\u003e\n\u003cli\u003eXT60 power line x1\u003c\/li\u003e\n\u003cli\u003eSH 1.0mm 8pin 30mm flat cable x1\u003c\/li\u003e\n\u003cli\u003e1000uF\/35V High frequency low resistance capacitor x1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3S-6S multirotor \/ quad builds using a 30.5x30.5mm mounting pattern\u003c\/li\u003e\n\u003cli\u003eFlight controller + 4-in-1 ESC stacks requiring VBAT output and current detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor wiring or firmware setup questions, contact support@rcdrone.top or visit https:\/\/rcdrone.top\/.\u003c\/p\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1.jpg?v=1776873269\"\u003e\u003cp\u003eThe 3–6S 32-bit 60A 4-in-1 ESC V1 uses a 32-bit ARM microprocessor rated up to 120MHz for reliable multirotor power delivery.\u003c\/p\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1_a2fa9d3b-6e4b-4067-9656-e29bfe382a0d.jpg?v=1776873282\"\u003e\u003cp\u003eThe 6-layer PCB design with 2oz copper thickness helps increase current-carrying capacity for a cleaner, more robust quad build.\u003c\/p\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1_a96f93f9-cf97-4830-a591-835c0086230a.jpg?v=1776873293\"\u003e\u003cp\u003eThe Returner 4-in-1 ESC uses a 32-bit main control chip paired with a 6288 driver chip for faster processing and operating speed.\u003c\/p\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1_dd75396a-8ada-4e4f-820f-56e3ea18baae.jpg?v=1776873305\"\u003e\u003cp\u003eThe Returner 4-in-1 ESC includes a TVS transient suppression diode and a 1000uF\/35V low-impedance filtering capacitor to help smooth power and reduce high-frequency noise.\u003c\/p\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1_3f9ece64-dc0b-43e2-afcb-f8b3e92f590c.jpg?v=1776873317\"\u003e\u003cp\u003eThe BrotherHobby Returner 4-in-1 ESC board uses SMT filter capacitors and an onboard current detector to help keep power delivery cleaner in compact builds.\u003c\/p\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1_2701fe6c-6c3a-48df-932a-e0eb46268db6.jpg?v=1776873330\"\u003e\u003cp\u003eThe Returner 4-in-1 ESC uses 24 high-power MOSFETs to improve power output while reducing temperature rise and boosting response speed.\u003c\/p\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1_f434a2f5-618e-47f4-818c-6f0bde766cb5.jpg?v=1776873342\"\u003e\u003cp\u003eThe built-in current detector monitors motor current and helps limit overload to protect the system during flight.\u003c\/p\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1_e60c28f4-11a2-48ce-86b3-7e6ae3c637e7.jpg?v=1776873353\"\u003e\u003cp\u003eThe Returner 4-in-1 ESC uses clearly labeled motor pads and GND\/voltage\/current pins to simplify wiring a 3–6S quad build.\u003c\/p\u003e\n\u003cimg alt=\"BrotherHobby Returner 3-6S 32Bit AM32 60A(4IN1) ESC V1\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BrotherHobby-Returner-3-6S-32Bit-AM32-60A4IN1-ESC-V1_65818be6-834d-423a-9ed0-905229ff3dc7.jpg?v=1776873366\"\u003e\u003cp\u003eThe Returner 4-in-1 ESC includes a 1000uF\/35V low-ESR capacitor, 8-pin flat cable, XT60 power lead, and M3 silicone screw set for a 30.5×30.5mm stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BrotherHobby","offers":[{"title":"Default Title","offer_id":51963545190624,"sku":"bro-174","price":69.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/e5875f140f.jpg?v=1776842869","url":"https:\/\/rcdrone.top\/products\/src-174-returner-3-6s-32bit-am32-60a-4in1-esc-v1","provider":"RCDrone","version":"1.0","type":"link"}