{"product_id":"src-flywoo-16069060600989986390654030-goku-f405-ervt-1s-5a-5-in-1-400mw-elrs-aio","title":"Flywoo GOKU F405 ERVT AIO Flight Controller 1S 5A 5-in-1 with 5.8GHz 400mW VTX + ELRS RX","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe Flywoo GOKU F405 ERVT is a 5-in-1 AIO flight controller that integrates the flight controller, 4-in-1 ESC, analog VTX, receiver, and OSD for compact 1S builds. It uses an STM32F405BGA MCU and includes a built-in ELRS receiver (Flywoo EL24E 2400 RX 3.0.0), plus a 5.8GHz analog VTX with up to 400mW output.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5-in-1 integration: \u003ca href=\"https:\/\/rcdrone.top\/collections\/flight-controller\" title=\"Flight Controller\"\u003eflight controller\u003c\/a\u003e + 4-in-1 ESC + analog VTX + receiver + OSD\u003c\/li\u003e\n\u003cli\u003eMCU: STM32F405BGA\u003c\/li\u003e\n\u003cli\u003eIMU\/Gyro: ICM42688P (built-in 4kHz gyro stated)\u003c\/li\u003e\n\u003cli\u003ePlug-and-play modular interfaces; 0.8mm pitch connectors are used for blackbox and receiver connections\u003c\/li\u003e\n\u003cli\u003eExternal blackbox support: no onboard blackbox; expandable up to 512MB external storage (optional plug-and-play blackbox mentioned with 1kHz sampling rate)\u003c\/li\u003e\n\u003cli\u003eAnalog VTX with adjustable output power and switch control (VTX can be turned off via a configured mode switch using USER2)\u003c\/li\u003e\n\u003cli\u003eIntegrated ELRS “pagoda” antenna design is described for convenient installation and optimized signal path (a range of ≥1.5km is stated)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor compatibility and setup questions (receiver, firmware targets, wiring), contact support@rcdrone.top.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCU\u003c\/td\u003e\n\u003ctd\u003eSTM32F405BGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIMU\u003c\/td\u003e\n\u003ctd\u003eICM42688P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarometer\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlackbox\u003c\/td\u003e\n\u003ctd\u003eNo (up to 512M external)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOSD\u003c\/td\u003e\n\u003ctd\u003eAT7456E (LGA16)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003ctd\u003eUART1 (VTX IRC), UART2 (Blackbox), UART3 (ELRS RX), UART4, UART5 (SBUS), UART6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported receiver protocols\u003c\/td\u003e\n\u003ctd\u003eCRSF, SBUS, iBus, Spektrum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBEC\u003c\/td\u003e\n\u003ctd\u003e5V 2.0A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRX\u003c\/td\u003e\n\u003ctd\u003eFlywoo EL24E 2400 RX 3.0.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFC firmware target\u003c\/td\u003e\n\u003ctd\u003eFLYWOOF405S_AIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e30.5 x 30.5mm (also shown as 30 x 30mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting holes\u003c\/td\u003e\n\u003ctd\u003eStandard 25.5\/25.5mm square to center of holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4g (with built-in antenna stated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eOnboard 4-in-1 ESC\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower input\u003c\/td\u003e\n\u003ctd\u003e1S only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e5A continuous, 8A peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESC firmware\u003c\/td\u003e\n\u003ctd\u003eO_H_5_48KHz_V0.19.hex (Bluejay firmware)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital signal protocol\u003c\/td\u003e\n\u003ctd\u003eDShot300, DShot600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor connector\u003c\/td\u003e\n\u003ctd\u003eJST1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery connector\u003c\/td\u003e\n\u003ctd\u003eA30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eOnboard analog VTX\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\u003ctd\u003e25\/50\/100\/200\/400\/0mW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVTX protocol\u003c\/td\u003e\n\u003ctd\u003eIRC Tramp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e5.8GHz, 40 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRaceband\u003c\/td\u003e\n\u003ctd\u003e5658-5917MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-15° to +80°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWiring \/ Setup Notes (as provided)\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBetaflight Ports setup guidance: enable UART1 IRC (for OSD\/VTX control) and set UART3 as Serial RX for the receiver interface.\u003c\/li\u003e\n\u003cli\u003eReceiver setup guidance: set Receiver Mode to “Serial Receiver (via UART)” and set Serial Receiver Provider to CRSF.\u003c\/li\u003e\n\u003cli\u003eELRS module management note: an “ELRS switch (short to close)” is indicated; built-in ELRS can also be disabled when using external receivers by modifying the receiver UART configuration or physically disconnecting ELRS per the wiring diagram note.\u003c\/li\u003e\n\u003cli\u003eVTX power off note: the built-in analog VTX can be turned off via mode “VTX POWER” (and USER2 is mentioned for operating the configured mode switch).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x GOKU F405 ERVT 1S 5A 5-in-1 400mW ELRS AIO\u003c\/li\u003e\n\u003cli\u003e1x A30 power cable\u003c\/li\u003e\n\u003cli\u003e1x JST-0.8 3-pin 50mm camera cable\u003c\/li\u003e\n\u003cli\u003e1x Flywoo blackbox connector cable\u003c\/li\u003e\n\u003cli\u003e4x 1.25mm 3-pin vertical straight socket\u003c\/li\u003e\n\u003cli\u003e4x M2 x 6.6 shock-absorbing ball\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ (from provided content)\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the built-in ELRS be disabled?\u003c\/strong\u003e Yes. When using TBS\/XM+ receivers, modify the receiver UART via the ground station, or physically disconnect the ELRS per the wiring diagram note to avoid interference with external devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the onboard ELRS firmware be updated?\u003c\/strong\u003e Yes. Receiver serial port flashing and Wi-Fi flashing are supported (update via the ELRS ground station or by connecting to the receiver’s Wi-Fi).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the integrated VTX be turned off?\u003c\/strong\u003e Yes. A mode switch is configured for the VTX and can be operated using USER2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat connector type is used for the blackbox and receiver?\u003c\/strong\u003e 0.8mm pitch connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it support LiHV high-voltage batteries?\u003c\/strong\u003e Yes. It is described as compatible with 3.0-4.35V input and includes over-voltage\/over-current protection for 1S LiPo\/LiHV use (a 1S-optimized 2.7-4.35V power architecture is also stated).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the benefits of the external blackbox?\u003c\/strong\u003e Optional Flywoo plug-and-play blackbox (512MB storage) with 1kHz sampling rate for gyro\/motor data; compatible with Betaflight Blackbox analysis tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich firmware and receiver protocols are supported?\u003c\/strong\u003e Betaflight is supported; receiver protocols include CRSF\/ELRS\/SBUS (also listed: iBus, Spektrum). ESC protocol support includes DShot300 (also listed: DShot600).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO_3b9cb232-39b9-4c9f-bdd9-1362e4c4d3cd.jpg?v=1776586740\"\u003e\u003cp\u003eThe Flywoo GOKU F405 ERVT AIO combines an F405 MCU with 1S 5A power handling and an integrated 25–400mW VTX for a compact, minimalist build.\u003c\/p\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO_61460b53-21f5-4021-8f7c-fb7cb6e08b41.jpg?v=1776586746\"\u003e\u003cp\u003eThe STM32 F405 processor core provides the computing foundation for stable flight control in the GOKU F405 AIO build.\u003c\/p\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO_d595d810-a301-4201-9b0e-6ae5e913e032.jpg?v=1776586752\"\u003e\u003cp\u003eA plug-in connector layout supports quick, solder-free wiring for a cleaner FPV build.\u003c\/p\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO_ea97cf30-071a-4a11-a693-e8c7c2b50a62.jpg?v=1776586759\"\u003e\u003cp\u003eThe on-board analog VTX uses a dedicated physical switch and supports adjustable output power from 25mW to 400mW for flexible setups.\u003c\/p\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO.png?v=1776586767\"\u003e\u003cp\u003eThe GOKU F405 ERVT 1S AIO uses an F405BGA chipset with a 1S-optimized 2.7–4.35V power range and plug-and-play motor and camera ports for cleaner wiring.\u003c\/p\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO_6526fccf-ce17-4988-a637-068e9d15641e.jpg?v=1776586772\"\u003e\u003cp\u003eThe GOKU F405 ERVT AIO uses a 2.4G ELRS integrated antenna design with clearly labeled pads for simpler wiring.\u003c\/p\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO_29a70034-dd25-4f75-b4ac-d7b81893abe2.jpg?v=1776586779\"\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/rcdrone.top\/collections\/flywoo\" title=\"FlyWoo\"\u003eFlywoo\u003c\/a\u003e GOKU F405 ERVT AIO uses clearly labeled pads for CAM, VTX, RX\/TX, LED, and buzzer wiring to simplify a clean build.\u003c\/p\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO_afaca744-9926-4ac4-8dd7-0fc8e51c4939.jpg?v=1776586786\"\u003e\u003cp\u003eClearly labeled motor pads, UART RX\/TX, CAM, SBUS(5), and power pads (5V\/4.5V, GND, BAT+) simplify wiring on the GOKU F405 ERVT AIO board.\u003c\/p\u003e\n\u003cimg alt=\"Flywoo GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/Flywoo-GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO_7a417f9b-ad17-42e3-b8ac-03bb003ad0fa.jpg?v=1776586792\"\u003e\u003cp\u003eBetaflight setup notes show enabling OSD on UART1 and setting UART3 as the serial receiver interface with CRSF selected as the provider.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Flywoo","offers":[{"title":"ERVT 1S AIO","offer_id":51432092795104,"sku":"flywoo-FW19004272","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/GOKU-F405-ERVT-1S-12A-5-in-1-3.jpg?v=1776047992","url":"https:\/\/rcdrone.top\/products\/src-flywoo-16069060600989986390654030-goku-f405-ervt-1s-5a-5-in-1-400mw-elrs-aio","provider":"RCDrone","version":"1.0","type":"link"}