{"product_id":"superp-14ch-diversity-receiver","title":"BETAFPV SuperP 14CH Diversity Receiver - ExpressLRS ELRS 2.4GHz\/915MHz\/868MHz TCXO USB-C PWM CRSF SBUS WiFi Setup","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/rcdrone.top\/collections\/betafpv\" title=\"BETAFPV\"\u003eBETAFPV\u003c\/a\u003e SuperP 14CH Diversity Receiver is a true ExpressLRS (ELRS) diversity receiver designed for RC models that need stable, reliable control with multi-channel PWM output. It supports 14 PWM channels and is intended for multirotors, fixed-wing aircraft, helicopters, RC cars, and RC boats. Versions are available for 2.4GHz, 915MHz, and 868MHz frequency bands.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 PWM channels\u003c\/strong\u003e (up to 14 servos), plus support for external sensors (e.g., barometer, current sensor) and an RGB light strip interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue diversity design\u003c\/strong\u003e with two complete RF receiver chains (dual SX1280\/SX1281 for 2.4GHz, or dual SX1276 for 915MHz\/868MHz).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTCXO oscillator\u003c\/strong\u003e shared by two RF chips for an accurate clock source (temperature-compensated crystal oscillator).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo antennas\u003c\/strong\u003e (2x U.FL) for diversity reception; separate and vertical placement is recommended for improved signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpressLRS firmware\u003c\/strong\u003e: default ExpressLRS V3.3.0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e reserved for firmware flashing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFailsafe function\u003c\/strong\u003e supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported protocols\u003c\/strong\u003e: PWM, CRSF, SBUS; I2C (IIC) also supported for external devices.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eItem\u003c\/td\u003e\n\u003ctd\u003eBETAFPV SuperP 14CH Diversity Receiver | ELRS 2.4GHz\/915MHz\/868MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCU \/ RF (2.4GHz version)\u003c\/td\u003e\n\u003ctd\u003eESP32 Pico D4 + 2*SX1280\/SX1281 + 2*AT2401C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCU \/ RF (915MHz\/868MHz version)\u003c\/td\u003e\n\u003ctd\u003eESP32 Pico D4 + 2*SX1276\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTelemetry Power\u003c\/td\u003e\n\u003ctd\u003e20dBm\/100mW (2.4GHz), 17dBm\/50mW (915MHz\/868MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Bands\u003c\/td\u003e\n\u003ctd\u003e2.4GHz ISM, 915MHz FCC \/ 868MHz EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Current\u003c\/td\u003e\n\u003ctd\u003e180mA@5V (2.4GHz), 140mA@5V (915MHz\/868MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15.5g (2.4GHz), 15.8g (915MHz\/868MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDefault Firmware Version\u003c\/td\u003e\n\u003ctd\u003eExpressLRS V3.3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Output Protocol\u003c\/td\u003e\n\u003ctd\u003ePWM, CRSF or SBUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna\u003c\/td\u003e\n\u003ctd\u003e2* U.FL Antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e46.9mm*32.7mm*14.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e3.5V~8.4V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Detector Range\u003c\/td\u003e\n\u003ctd\u003e1~6S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePWM Channel\u003c\/td\u003e\n\u003ctd\u003e14 Channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapted RC Model Type\u003c\/td\u003e\n\u003ctd\u003eMultirotors, Fixed-wing aircraft, Helicopters, RC Cars, RC Boats and etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003ePower note:\u003c\/strong\u003e This receiver accepts 3.5~8.4V. For many servo setups, a 2S \u003ca href=\"https:\/\/rcdrone.top\/collections\/drone-battery\" title=\"Drone Battery\"\u003ebattery\u003c\/a\u003e or above may need to be converted to 5V using a BEC before being connected.\u003c\/p\u003e\u003cp\u003eFor installation or version selection help (2.4GHz vs 915MHz\/868MHz), contact \u003ca href=\"https:\/\/rcdrone.top\/\"\u003ehttps:\/\/rcdrone.top\/\u003c\/a\u003e or email \u003ca href=\"mailto:support@rcdrone.top\"\u003esupport@rcdrone.top\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eRGB Status Indication\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable width=\"100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRGB Color\u003c\/td\u003e\n\u003ctd\u003eStatus\u003c\/td\u003e\n\u003ctd\u003eDescription\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRainbow\u003c\/td\u003e\n\u003ctd\u003eFade effect\u003c\/td\u003e\n\u003ctd\u003ePower on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003eSlow flash\u003c\/td\u003e\n\u003ctd\u003eWIFI upgrading mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003eQuick flash\u003c\/td\u003e\n\u003ctd\u003eNo RF chip detected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003ctd\u003eDouble flash\u003c\/td\u003e\n\u003ctd\u003eBinding mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003ctd\u003eTriple flash\u003c\/td\u003e\n\u003ctd\u003eConnected, but mismatched model-match configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003ctd\u003eSlow flash\u003c\/td\u003e\n\u003ctd\u003eWaiting for connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid on\u003c\/td\u003e\n\u003ctd\u003eConnected and color indicates packet rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003ePacket-rate notes:\u003c\/em\u003e F1000 and F500 are packet rates in FLRC mode (lower latency with shorter reception distance than normal LoRa mode). D500 and D250 are packet rates in DVDA (Deja Vu Diversity Aid) mode; D500 and D250 indicate the same data packet is sent twice and four times respectively. D50 is an exclusive mode under ELRS 900M, sending packets four times repeatedly under 200Hz LoRa mode; receiving distance is equivalent to 200Hz. 100Hz Full achieves 16-channel full resolution output at the 200Hz packet rates of LoRa mode; receiving distance is equivalent to 200Hz.\u003c\/p\u003e\u003ch2\u003ePort Configuration\u003c\/h2\u003e\u003cp\u003eEnter the configuration page via WiFi mode:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower on the receiver and wait for 60 seconds without binding to any transmitted equipment.\u003c\/li\u003e\n\u003cli\u003eOnce the RGB indicator is in slow green flashing, the receiver's WiFi has been activated.\u003c\/li\u003e\n\u003cli\u003eConnect WiFi via cellphone or PC (WiFi name: ExpressLRS RX, password shown as \u003cstrong\u003eexpresslrs\u003c\/strong\u003e \/ \u003cstrong\u003eExpressLRS\u003c\/strong\u003e in the provided instructions).\u003c\/li\u003e\n\u003cli\u003eOpen: \u003cstrong\u003ehttp:\/\/10.0.0.1\/hardware.html\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn the configuration page, users can set the PWM pin, CRSF pin, I2C pin, etc. The pin number corresponds to specified channels.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNote: Please do not modify other function pins.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003ePin Mapping\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain\u003c\/td\u003e\n\u003ctd\u003eCH1\u003c\/td\u003e\n\u003ctd\u003eCH2\u003c\/td\u003e\n\u003ctd\u003eCH3\u003c\/td\u003e\n\u003ctd\u003eCH4\u003c\/td\u003e\n\u003ctd\u003eCH5\u003c\/td\u003e\n\u003ctd\u003eCH6\u003c\/td\u003e\n\u003ctd\u003eCH7\u003c\/td\u003e\n\u003ctd\u003eCH8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecond\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003e36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain\u003c\/td\u003e\n\u003ctd\u003eCH9\u003c\/td\u003e\n\u003ctd\u003eCH10\u003c\/td\u003e\n\u003ctd\u003eCH11\u003c\/td\u003e\n\u003ctd\u003eCH12\u003c\/td\u003e\n\u003ctd\u003eCH13\u003c\/td\u003e\n\u003ctd\u003eCH14\u003c\/td\u003e\n\u003ctd\u003eRGB\u003c\/td\u003e\n\u003ctd\u003eVBAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecond\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eSCL\u003c\/td\u003e\n\u003ctd\u003eSDA\u003c\/td\u003e\n\u003ctd\u003eRX\u003c\/td\u003e\n\u003ctd\u003eTX\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eSBUS\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eVBAT\u003c\/em\u003e is the battery voltage detection port, supporting 1~6S battery voltage detection.\u003c\/li\u003e\n\u003cli\u003eWhen configured to use \u003cem\u003eCRSF\u003c\/em\u003e output, CH13 becomes RX and CH14 becomes TX.\u003c\/li\u003e\n\u003cli\u003eWhen configured to use \u003cem\u003eSBUS\u003c\/em\u003e output, CH13 has no output, and CH14 becomes SBUS.\u003c\/li\u003e\n\u003cli\u003eFactory default: CH11 and CH12 are configured as I2C serial ports; at this time, CH13 becomes CH11 and CH14 becomes CH12.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBinding Procedure\u003c\/h2\u003e\u003cp\u003eThe default firmware uses ExpressLRS V3.3.0 protocol and has no preset binding phrase. The transmitter module firmware must be ExpressLRS V3.0.0 or later. Both the receiver and transmitter module should not have any binding phrase.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower on and off the receiver 3 times, pausing 2 seconds each step to enter binding mode.\u003c\/li\u003e\n\u003cli\u003eWhen the indicator fast blinks with orange twice, the receiver is in binding mode.\u003c\/li\u003e\n\u003cli\u003eEnter the radio or transmitter module binding mode; when the indicator turns solid, binding is successful.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eNote: After successful binding, the receiver will record the device and future binding will be automatic.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFailsafe and Channel Output Settings\u003c\/h2\u003e\u003cp\u003eWiFi method:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAfter the receiver is powered on, wait for 60 seconds without connecting the remote control.\u003c\/li\u003e\n\u003cli\u003eThe RGB indicator enters the green slow flashing state, and the receiver automatically turns on WiFi (WiFi name: ExpressLRS RX, WiFi password: ExpressLRS).\u003c\/li\u003e\n\u003cli\u003eUse a mobile phone or computer to connect to WiFi, and log in to \u003cstrong\u003ehttp:\/\/10.0.0.1\u003c\/strong\u003e with a browser to find the model page.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFailsafe settings note: Do not click “Reverse”. If “750us” is selected, the failsafe value needs to be halved. When the failsafe value is greater than 1500, the mode will automatically switch to “On\/Off” mode.\u003c\/p\u003e\u003cp\u003eChannel output mode descriptions:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e50-400Hz: output PWM signal frequency\u003c\/li\u003e\n\u003cli\u003e10KHzDuty: used to directly drive micro-motors\u003c\/li\u003e\n\u003cli\u003eON\/OFF: output high-level or low level\u003c\/li\u003e\n\u003cli\u003eSerial TX\/RX: serial communication port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eI2C\/CRSF\/SBUS output settings:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eI2C output: set channel 11 to I2C SCL and set channel 12 to I2C SDA\u003c\/li\u003e\n\u003cli\u003eCRSF\/SBUS output: set channel 13 to serial RX or set channel 14 to Serial TX\u003c\/li\u003e\n\u003cli\u003eSupported Serial Protocol (as listed): CRSF, SBUS, SUMD, DJI RS Pro, HoTT Telemetry\u003c\/li\u003e\n\u003cli\u003eSet the baud rate on the options page (SBUS serial protocol cannot set the baud rate)\u003c\/li\u003e\n\u003cli\u003eClick “SAVE\u0026amp;REBOOT” to complete the CRSF\/SBUS output setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFixed-wing aircraft\u003c\/li\u003e\n\u003cli\u003eHelicopters\u003c\/li\u003e\n\u003cli\u003eMultirotors\u003c\/li\u003e\n\u003cli\u003eRC cars\u003c\/li\u003e\n\u003cli\u003eRC boats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 * SuperP 14CH Diversity Receiver (2.4GHz\/915MHz\/868MHz)\u003c\/li\u003e\n\u003cli\u003e2 * 150mm Monopole Antenna (2.4GHz)\u003c\/li\u003e\n\u003cli\u003e2 * 150mm Dipole T Antenna (915MHz\/868MHz)\u003c\/li\u003e\n\u003cli\u003e1 * GH2.0 3-Pin Cable\u003c\/li\u003e\n\u003cli\u003e1 * GH2.0 4-Pin Cable\u003c\/li\u003e\n\u003cli\u003e1 * Y Splitter Cable for Servo\u003c\/li\u003e\n\u003cli\u003e1 * Voltage Test Cable\u003c\/li\u003e\n\u003cli\u003e1 * User Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManuals\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.betafpv.com\/hc\/en-us\/articles\/19291583372953-Manual-for-SuperP-14CH-diversity-RX\" rel=\"nofollow noopener\" target=\"_blank\"\u003eUser manual (download)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.betafpv.com\/hc\/en-us\/articles\/19095027097753-How-to-flash-the-firmware-for-SuperP-14CH-diversity-RX\" rel=\"nofollow noopener\" target=\"_blank\"\u003eFirmware flashing guide \/ firmware download\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.betafpv.com\/hc\/en-us\/articles\/19115400703641-How-to-detect-and-correct-battery-voltage\" rel=\"nofollow noopener\" target=\"_blank\"\u003eVBAT voltage adjustment method\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.expresslrs.org\/hardware\/crystal-frequency-error\/#\" rel=\"nofollow noopener\" target=\"_blank\"\u003eTCXO \/ crystal frequency error reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"BETAFPV SuperP 14CH Diversity Receiver ELRS PWM receiver overview with dual antennas and 14-channel output\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver.jpg?v=1777530938\"\u003e\u003cp\u003eTrue ExpressLRS diversity receiver with up to 14 PWM channels for stable control across multiple RC platforms.\u003c\/p\u003e\n\u003cimg alt=\"BETAFPV SuperP 14CH Diversity Receiver dimensions view showing compact case and USB‑C port on the side\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_0dfa0f6b-6e1f-4580-8232-7d1975a58952.jpg?v=1777530945\"\u003e\u003cp\u003eA compact 46.9 × 32.7 × 14.6 mm footprint makes it easier to fit in tight airframes and enclosures.\u003c\/p\u003e\n\u003cimg alt=\"SuperP 14CH diversity receiver compared with smaller ELRS receivers to highlight relative size and antenna setup\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_7a2721f5-5aa5-4601-a3ed-b36683d945f1.jpg?v=1777530954\"\u003e\u003cp\u003eReceiver sizing across the ELRS lineup helps match your build to the channel count and diversity needs.\u003c\/p\u003e\n\u003cimg alt=\"Graphic showing receiver use with fixed-wing aircraft, RC boat, and RC car model types\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_3b257d59-8c29-4c9a-aeff-c0c199f814ed.jpg?v=1777530961\"\u003e\u003cp\u003eDesigned for multirotors, fixed-wing, helicopters, RC cars, and RC boats that need multi-channel PWM control.\u003c\/p\u003e\n\u003cimg alt=\"Antenna placement illustration with receiver mounted and two antennas set at 90 degrees for better diversity signal\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_41d055b5-50ee-406b-956f-770e90e604b4.jpg?v=1777530968\"\u003e\u003cp\u003eSeparate the two antennas and keep them at roughly 90° for more consistent reception in different orientations.\u003c\/p\u003e\n\u003cimg alt=\"Close-up of the onboard TCXO component on the receiver PCB for improved frequency stability\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_be7a74a4-bbd5-4cd9-b037-be1cb62fc5c0.jpg?v=1777530974\"\u003e\u003cp\u003eA TCXO provides a more accurate clock source to help maintain reliable links over temperature changes.\u003c\/p\u003e\n\u003cimg alt=\"Labeled ports and connectors on the receiver, including dual antenna ports, RGB LED, and USB‑C Type‑C\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_4ec788ce-3cde-4d43-824e-680262f4fb44.jpg?v=1777530982\"\u003e\u003cp\u003eClearly labeled connectors support PWM outputs, external device connections, and USB‑C firmware flashing.\u003c\/p\u003e\n\u003cimg alt=\"Wiring\/pin layout diagram graphic with multiple labeled connection blocks on a dark background\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver.avif?v=1777530989\"\u003e\u003cimg alt=\"BETAFPV ELRS series lineup image with antennas, receivers, and modules arranged on a tabletop\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_32829b7a-0cc8-43c7-9ece-b83094030953.jpg?v=1777531000\"\u003e\u003cimg alt=\"ExpressLRS welcome screen graphic highlighting the ELRS ecosystem and RC link concept\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_82c806c1-3625-4e7a-abf2-17f479626cb5.jpg?v=1777531010\"\u003e\u003cimg alt=\"Package contents including SuperP 14CH diversity receiver, documentation, wiring harnesses, and antenna\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/BetaFPV-SuperP-14CH-Diversity-Receiver_dff0a6fb-a6c9-43b4-a511-ea3cdfd856a4.jpg?v=1777531019\"\u003e\u003cp\u003eIncluded accessories cover basic wiring and antenna setup so you can start installation right away.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BETAFPV","offers":[{"title":"ELRS 2.4GHz","offer_id":52393445425376,"sku":"01070007_1-1","price":41.99,"currency_code":"USD","in_stock":true},{"title":"ELRS 915MHz","offer_id":52393445458144,"sku":"01070007_1-2","price":41.99,"currency_code":"USD","in_stock":true},{"title":"ELRS 868MHz","offer_id":52393445490912,"sku":"01070007_1-3","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/74b96dbb2d19db9758ba306fc55ad040_214e662b-6064-4223-97e6-cd020b96b162.jpg?v=1777476875","url":"https:\/\/rcdrone.top\/products\/superp-14ch-diversity-receiver","provider":"RCDrone","version":"1.0","type":"link"}