{"product_id":"zed-f9p-01b-01-excellent-gnss-board-works-serial-i2c-esp32-controlling-i2c-and-spi-um980","title":"ZED-F9P-01B-01 GNSS Development Board USB-C RAWX 1-20Hz UART1 GH1.25-6P SMA\/U.FL Antenna","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis GNSS development board is designed for GPS\/GNSS module development and integration. It supports RAWX multiple GNSS raw measurement data outputs and provides USB and connector interfaces for configuration, data output, and external controller\/autopilot connection.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAWX:\u003c\/strong\u003e Supports multiple GNSS raw measurement data outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-GNSS support (stated):\u003c\/strong\u003e GPS, GLONASS, Galileo, and Beidou.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdate frequency:\u003c\/strong\u003e 1Hz - 20 Hz (default 1Hz).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -40 °C to 85 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable baud rate:\u003c\/strong\u003e 4800bps~ 921600bps (default 38400bps).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts (stated):\u003c\/strong\u003e 2 x 1.0mm pitch 4Pins connectors, USB.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor integration or compatibility questions, contact \u003ca href=\"https:\/\/rcdrone.top\/\"\u003ehttps:\/\/rcdrone.top\/\u003c\/a\u003e or email \u003ca href=\"mailto:support@rcdrone.top\"\u003esupport@rcdrone.top\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ch3\u003eGNSS \/ Performance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRAWX\u003c\/td\u003e\n\u003ctd\u003eSupports multiple GNSS raw measurement data outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported satellite systems (stated)\u003c\/td\u003e\n\u003ctd\u003eGPS, GLONASS, Galileo, Beidou\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpdate frequency\u003c\/td\u003e\n\u003ctd\u003e1Hz - 20 Hz (default 1Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable baud rate\u003c\/td\u003e\n\u003ctd\u003e4800bps~ 921600bps (default 38400bps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInterfaces \/ Connectivity\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB interface\u003c\/td\u003e\n\u003ctd\u003eUSB C connector; enumerates as a serial COM port (independent of UART interface); used for configuration and viewing NMEA sentences\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts (stated)\u003c\/td\u003e\n\u003ctd\u003e2 x 1.0mm pitch 4Pins connectors, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJ3 port connector\u003c\/td\u003e\n\u003ctd\u003eGH1.25-6P (Pixhawk JST-GH standard); can connect to Pixhawk autopilot and can be used to power the board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJ3 pinout\u003c\/td\u003e\n\u003ctd\u003e1: 5V_IN; 2: ZED-F9P UART1 receiving (3.3V level); 3: ZED-F9P UART1 TX (3.3V level); 4,5: Not connected; 6: Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna interface\u003c\/td\u003e\n\u003ctd\u003eTwo antenna interfaces: one SMA external screw internal hole, and one U.FL socket IPEX (either one acceptable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePower (USB Interface Notes)\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOn-board regulation (stated)\u003c\/td\u003e\n\u003ctd\u003e3.3V regulator provided to regulate 5V USB to 3.3V required by the module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal power options (stated)\u003c\/td\u003e\n\u003ctd\u003eExternal 5V can be applied, or a direct feed of 3.3V can be provided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.3V supply quality note (stated)\u003c\/td\u003e\n\u003ctd\u003eIf 3.3V is supplied directly, it should be a clean supply with minimal noise (less than 50mV VPP ripple is ideal for precise positioning)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRegulator capability (stated)\u003c\/td\u003e\n\u003ctd\u003e3.3V regulator capable of delivering 600mA from 5V input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C capability (stated)\u003c\/td\u003e\n\u003ctd\u003eUSB C connection is capable of delivering 2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eStatus LEDs (stated)\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLEDs\u003c\/td\u003e\n\u003ctd\u003eThe board includes four status LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eWhen 3.3V is activated via USB or via the Qwiic bus, the power LED illuminates red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePPS\u003c\/td\u003e\n\u003ctd\u003eOnce position lock is achieved, the Pulse Per Second LED illuminates once per second with a yellow light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRTK\u003c\/td\u003e\n\u003ctd\u003eRTK LED blue light stays on after powering on; after successfully receiving RTCM data it starts flashing; after getting the RTK fix, the LED turns off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFENCE\u003c\/td\u003e\n\u003ctd\u003eFENCE LED can be configured to turn on\/off geofencing applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModule Marking \/ Board Drawing (visible)\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule marking (on unit)\u003c\/td\u003e\n\u003ctd\u003eZED-F9P-01B-00; G6300011410; 109102002.0101; 10; 19\/42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawing note\u003c\/td\u003e\n\u003ctd\u003eDiagram shows “Pin 1 Indicator” and dimension reference letters (A, B, D, E, F, G, H, K, L, M, N, P, R, Z); no numeric values provided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSeller-Provided Attributes\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand Name\u003c\/td\u003e\n\u003ctd\u003eNONE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixed Type\u003c\/td\u003e\n\u003ctd\u003eMagnetic Fastener\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-concerned chemical\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMainland China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eWindow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGNSS\/GPS module development and testing (RAWX raw measurement data access)\u003c\/li\u003e\n\u003cli\u003eUSB-C connection for configuration and NMEA sentence viewing\u003c\/li\u003e\n\u003cli\u003ePixhawk autopilot integration via GH1.25-6P (J3) UART1 (3.3V level)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2 id=\"details\"\u003eDetails\u003c\/h2\u003e\u003cdiv class=\"details-gallery\"\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sc082fea65ba84e4ab23c21b13fd46c70p.jpg\"\u003e\u003cp\u003eThe ZED-F9P GNSS development board combines a USB-C connection, GH-style headers, and an SMA antenna connector for flexible integration.\u003c\/p\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ZED-F9P-01B-01-GNSS-Development-Board-USB-C-RAWX-1-20Hz_4518e791-a4a3-40aa-bdbc-21d72199b7c7.webp?v=1775122859\"\u003e\u003cp\u003eThe pin 1 indicator and pad layout help align the ZED-F9P module correctly during PCB footprint design and assembly.\u003c\/p\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ZED-F9P-01B-01-GNSS-Development-Board-USB-C-RAWX-1-20Hz_84670c54-dae2-4777-9e1e-9d25eeb370a6.webp?v=1775122882\"\u003e\u003cp\u003eThe ZED-F9P development board uses a USB-C connection for configuration and NMEA viewing, with an onboard 3.3V regulator to step 5V USB down to 3.3V.\u003c\/p\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ZED-F9P-01B-01-GNSS-Development-Board-USB-C-RAWX-1-20Hz_cbe8926f-7a5a-4429-a383-22ed768e1203.webp?v=1775122903\"\u003e\u003cp\u003eThe J3 GH1.25-6P connector provides 5V input, 3.3V UART1 RX\/TX, and ground, with onboard LEDs for power, PPS, and RTK status.\u003c\/p\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ZED-F9P-01B-01-GNSS-Development-Board-USB-C-RAWX-1-20Hz_454540fc-a88c-499f-be67-a35a5a199a26.webp?v=1775122922\"\u003e\u003cp\u003eThe ZED-F9P development board supports either an SMA external antenna connection or a U.FL (IPEX) socket for flexible antenna wiring.\u003c\/p\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ZED-F9P-01B-01-GNSS-Development-Board-USB-C-RAWX-1-20Hz_3b51b95c-7748-4372-b19e-f1208db872fb.webp?v=1775122941\"\u003e\u003cp\u003eThe ZED-F9P-01B GNSS development board combines a USB-C interface, onboard module, and SMA antenna connector for clean integration into projects.\u003c\/p\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ZED-F9P-01B-01-GNSS-Development-Board-USB-C-RAWX-1-20Hz_068a5395-3c5e-44ec-af97-6394f4fe9e77.webp?v=1775122959\"\u003e\u003cp\u003eThe ZED-F9P GNSS development board pairs a USB-C interface with JST-style headers and a right-angle SMA antenna connector for clean, compact wiring.\u003c\/p\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ZED-F9P-01B-01-GNSS-Development-Board-USB-C-RAWX-1-20Hz_1be93a54-0bba-4c1a-b6f8-caae2aae8cbb.webp?v=1775122985\"\u003e\u003cp\u003eThe ZED-F9P GNSS development board combines a USB-C connection, SMA antenna jack, and onboard headers for easy prototyping and wiring.\u003c\/p\u003e\n\u003cimg alt=\"ZED-F9P-01B-01 Excellent GNSS Board Works Serial I2C ESP32 Controlling I2C And SPI UM980\" loading=\"lazy\" src=\"https:\/\/rcdrone.top\/cdn\/shop\/files\/ZED-F9P-01B-01-GNSS-Development-Board-USB-C-RAWX-1-20Hz_e61db6d0-7ba2-46d0-abad-0dcd4942b3de.webp?v=1775123003\"\u003e\u003cp\u003eThe ZED-F9P GNSS development board combines a USB-C connection with onboard SMA and U.FL antenna options for flexible setup.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RCDrone","offers":[{"title":"Default Title","offer_id":51327303385312,"sku":"1005008148746092-Default Title","price":213.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/3210\/3904\/files\/Sc6cfec616ccd495981b5b5fd850aee34Z.webp?v=1775119818","url":"https:\/\/rcdrone.top\/products\/zed-f9p-01b-01-excellent-gnss-board-works-serial-i2c-esp32-controlling-i2c-and-spi-um980","provider":"RCDrone","version":"1.0","type":"link"}