for dji mavic 3 Feature:

1. Suitable for Mavic 3 drone,
2. It can be delivered remotely for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc,
3. USB charging, quick release, one-key remote control,
4. Lightweight and safe, it will neither increase the burden of the drone nor damage the drone, and is easy to install and disassemble,
5. The height of the front landing gear is increased by 3.7cm, and the height of the rear landing gear is increased by 3cm, which can effectively prevent ground debris from contaminating the body or damaging the gimbal and body during take-off and landing.

Note: The "red light is always on" during charging, the "green light is always on" when fully charged, the parabola will flash a few red lights when it is opened for normal use, and then the "red light is always on";

Description:
Material: ABS,
Applicable models: for Mavic 3
Color: Dark grey,
Net weight: 79.2g
Package weight: 126.6g
Product size: 9.7*8.5*5.3cm
Package size: 9.6*12.1*7cm

Specifications
Maximum load weight: 500g,
Built-in battery capacity 150mAh,
Charging interface: Micro-USB,
Charging time: 90 minutes,
Charge once to open about 300 times,

Packing list:
1 pcs payload release kits,
1 set Landing gear,
1 pcs USB charging cable.

Note:
1.Does not include the Drones,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
5. Make sure you have enough power before using.

Drone thrower for MMic 4 37 Lightweight Air throw Effectively and safe ncrease 37mm .

79.2g/126.6g 9.6*12.1*7cm Product size 9.4*8.5*5cm (thrower) , 8.7*2*1.8cm(nose landing gear),5.5*2 *2.2cm . (rear landing gear) Packing list Thrower x 1.

unobstructed installation When the thrower is installed, the drone's visual positioning sensor is not

built-in battery capacity: 150mAh Standby time: about 12 hours Self-charging time: 1.5 hours Charge once to open: about 300 times .

landing gear is effectively increased by 37mm without affecting the propellers and sensors . it can still take off and land on uneven ground, effectively protecting the safety of the fuselage .

thrower installation steps 1 and 2 . fasten the top buckle to complete the drone, installation_steps 1 and 3 .

open the DJI Fly App to redefine the fill light and set the filllightto off . short press the "Fn" button in the upper left corner of the remote control .

for mavic 2 pro zoom Feature:

1. Suitable for Mavic 2 Pro/Zoom drones;
2. It can be delivered remotely, used for advertising, bait, gifts, meal delivery, wedding rings, etc.;
3. USB charging, quick release, one-key remote control;
4. The landing gear is installed at the bottom, which can effectively raise the drone by 3.2cm, which can prevent the sundries at the bottom of the aircraft from contaminating the fuselage or damaging the gimbal during take-off and landing;
5. Lightweight and safe, does not affect the flight of the drone, and is easy to install and disassemble.

Description:
Material: ABS,
Applicable models: for Mavic 2 Pro &Zoom,
color:Gray,
Net weight: 70g,
Package weight: 130g,
Product size: 10.2*8.5*6.6cm
Package size: 12.5*9.5*7cm

Packing list:
1pcs Airdropper
1set Landing gear
1pcs Airdropper charging cable
1pcs Steel ring

Note:
1.Does not include Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Specifications Product name Thrower for Mini 3 Pro Applicable Mavic 2 Zoom/Pro models Appearance Main material: ABS parameters color: grey Net weight: 70g Weight with packaging: about 130g Product size: 10.2*8.5*6.6cm Packing size: 12.5*9.5*7c

gift artifact Applicable to Mavic 2 Pro/Zoom drone, can be de-livered remotely . can be used for throwing bait, sending wedding rings, etc;

travel light and free airdrop The installed weight is about 70g, which is light and safe . it integrates the design of the fuselage, and you can give gifts by air .

non-destructive installation, fast and convenient After installation, it does not block the use of the drone's visual positioning sensor and infrared sensor

the bottom landing is effectively increased by 32MM . this can still take off and land under uneven ground, effectively protecting the safety of the fuselage.

the front landing gear has no direction, and the rear landing gear is marked with the letters L/R . the back landing gear can be installed and fixed; opened and fastened .

click the "Remote Control Setting" button in the upper right corner of the interface . set "C1 as 'Bottom Auxiliary Lighting Acmotc controllcr Scttings Watncacal controicc Donatchange Ioder unioss VEu Kcamninatln otaceolnas Rcmole Controll Cr LCD Screen Introcuction Caaniince Charging Node Centc Auorotu?

for dji mavic pro Feature:

Suitable for DJI Mavic Pro/Mavic Pro Platinum only,don't fit JI Mavic 2 Zoom Pro drone.
Can be remotely delivered, for advertising, throw fishing bait, throw gifts, delivery meals, delivery wedding rings, etc.

Specification:

Material: plastic shell,
Max Loading weight:500g,
Charging Time: about 1.5 hours,
Product Weight: about 82g,
Come with protective height extender landing gear,protect your drone when landing or take off,

Package Included:
1set of air drop system,
1 set of landing gear kits,
Note:
Not include the drone.

landing gear Thrower Landing gear cushion Rubber band Cable tie Thrower hanging Connecting line for light sensor Micro-USB charging cable

for mavic air 2 2s Feature:

1.Suitable for DJI Mavic Air 2 drone,
2.Can be remotely delivered, for advertising, throw fishing bait, throw gifts, delivery meals, delivery wedding rings, etc,
3.Quick release, build in rechargeable battery,
4.Lightweight and safe,
5.Come with height extender landing gear,won't affect the propeller and sensor!

Description:
Material: ABS,
Applicable models: for Mavic Air 2
Color:Gray,
Net weight: 82g,
Product size: 9.7*8.5*5.3cm

Specifications
Maximum load weight: 500g,
Built-in battery capacity 150mAh,
Charging interface: Micro-USB,
Charging time: 90 minutes,
Charge once to open about 300 times,

Packing list:
1 pcs airdrop system,
1 set of landing gear,

Note:
1.Does not include the Drones and remotes,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
5. Make sure you have enough power before using.

Thrower for Mavic Air 2 Can be remotely delivered, for advertising, throw fishing bait, throw gifts, delivery meals, delivery wedding rings; etc. Material increase 35MM .

Applicable models main material Thrower for Mavic Air 2 ABS Net weight/Package weight Product Size Package size 82g/141.5g 9.7*8.5*5.3cm 14*11.5*5.3 cm

Suitable for DJI Mavic Air 2 drone Airdrop System for DJl drone . one-key control of DJl remote control MsuRZ Lightweight, safe and stable Can be remotely delivered .

thrower will not block the UAV visual positioning sensor Snap design Buckle design, safe and convenient; does not affect the switch . Built-in battery capacity: 1SOmAh Standby time: about 12 hours Self-charging time: 1.5 hours .

the heightening landing gear is effectively increased by 18/22/35mnm . it can still 8 take off and land in uneven environment of the ground .

open the DJI Fly APP to redefine the remote control, and click 2. Click Safety Auxiliary LED - Off; the setting button inthe upper right corner; Coc CeJt Comco Tror n Abon remote controller buttons .

Packing list Thrower Photosensitive sensor cable Landing gear (set) X1 USB charging cable X | Rubber band X 5 Throwing rings Band

for mini 1 2 se Feature:

1. Suitable for MINI 2/MAVIC MINI drones, which can be delivered remotely for advertising, bait throwing, gift throwing, food delivery, wedding ring delivery, etc.
2. Mini easy to throw, let you show more possibilities of creation,
3. 3. The thrower is charged via USB, quickly released, and the remote control (non-rechargeable) controls the transmission through the button,
4. The installation weight is about 54g, light and safe, and the fuselage design is integrated, which will not damage the drone, so you can get interesting airdrop gifts,
5. The bottom landing gear is effectively increased by 3cm, and it can still take off and land under uneven ground, effectively protecting the safety of the fuselage.

Description:
Material: ABS,
Applicable models: for MINI 2/MAVIC MINI
Color:Gray,
Net weight: 79g,
Product size: 8.6*6.2*3.5cm (thrower), 3.8*5.8*1.5cm (remote control)

Specifications
Maximum load: 100g
Built-in battery capacity: 150 mAh
Approximate standby time: 12 hours
Charging time: 1.5 hours
Remote control distance: 100 meters
Charging interface: Type-C

Packing list:
1pcs Thrower
1pcs Remote control
1set Increase landing gear

Note:
1.Does not include the Drones, diamond rings, gifts, etc.
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
5. Make sure you have enough power before using.

a d r p p Thrower For MINI 2/1 Used for throwing bait, throwing gifts, giving wedding rings, etc. MINI 2 024 Lightweight Preset multi- Good material; and safe scene air

Aerial thrower Delivery Suitable for MINI 2/MAVIC MINI drones . it can be used for throwing bait, throwing gifts, delivering meals, sending wedding rings .

the remote control cannot be charged. when it is out of power, you need to prepare and replace the 23A 12V battery (not included in delivery)

Aerial thrower Lightweight and safe The installed weight is about 54g, which is light and safe; the integrated fuselage design will not damage the drone .

bottom landing gear is effectively increased by 3cm, and it can still take off and land under uneven ground . effectively increase 3CM, and still effectively protects the safety of the fuselage

Landing gear installation MINI 2 Mavic Mini 2 front foot installation diagram Installation with square fadng back opening facing forward 1 Align the direction of the front legs and And push the forward landing gear; fasten the buckle .

a thrower is inserted into the second slot at the bottom of the drone . a top buckle is attached to the top of the thrower .

for dji mini 3 pro Feature:

1. Suitable for Mini 3 Pro drone, can be delivered remotely, used for throwing bait, throwing gifts, giving wedding rings, etc.
2. Mini easy to throw, let you show more possibilities of creation,
3. 3. The thrower is charged via USB, quickly released, and the remote control (non-rechargeable) controls the transmission through the button,
4. The installation weight is about 40g, light and safe, and the fuselage design is integrated, which will not damage the drone, so you can get interesting airdrop gifts,
5. The bottom landing gear is effectively increased by 21mm, and it can still take off and land under uneven ground, effectively protecting the safety of the fuselage.

Description:
Material: ABS,
Applicable models: for Mini 3 Pro
Color:Gray,
Net weight: 78.5g
Product size: 9*6.5*3.5cm (thrower), 3.8*5.8*1.5cm (remote control)

Specifications
Maximum load: 100g
Built-in battery capacity: 150 mAh
Approximate standby time: 12 hours
Charging time: 1.5 hours
Remote control distance: 100 meters
Charging interface: Type-C

Packing list:
1pcs Thrower
1pcs Remote control
1set Increase landing gear
1pcs Remote control screwdriver
1pcs Thrower charging cable
1pcs Manual

Note:
1.Does not include the Drones, diamond rings, gifts, etc.
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
5. Make sure you have enough power before using.

Mini 3 Pro Airdrop Device Remote delivery Send wedding ring Throwing bait throwing MINI3 PRO: Lightweight and Preset multi - Good quality Lossless safe scene airdrop durable Quick release and easytouse quick installation gifts

Airdrop Device for Mini 3 Pro Drone Applicable mini 3 Pro models Appearance color: grey parameters Main material: ABS Net weight: 78.8g Weight with packaging: 139.6g Product size: 9*6.5*3.Scm (Airdrop), 3.8*5.8*1.

Mini 3 Pro drone can be delivered remotely . can be used for throwing bait, throwing gifts, delivering meals and delivering wedding .

Lightweight Airdrop The installed weight is about 40g, which is light and safe . the integrated fuselage design will neither increase the burden on the drone nor damage the drone .

Airdrop Device Let you show and create more possibilities Snap Switch indicator Charging port Throw switch - Swing arm Charging indicator Power switch Hanging mouth Start airdrop Close the airdrop

airdropper switch control Airdropper on/off button remote control switch Body key control switch After the airdrop switch is turned Press the button on, the state of airdrop can be controlled through the remote con - per; trol and down "up" and "down" button.

bottom landing gear is effectively increased by 21mm without affecting the propellers and sensors . it can still take off and land in an environment with uneven ground, effec- tively protecting the safety of the fuselage .

there are codes 1/2/3/4 in the landing gear buckle corresponding to the left front/right front/left rear/right rear arm, as shown in the figure above .

packing list 6cm 8.5cm 13cm Product Manual Ovnvin Hoductotply dutdrdn Jccfte BrdrC SYSTEM ThroW REMOTE - 'Drotie 1 For tailli ?