AKK FX2 5.8GHz 0.01/25/200/500/800mW 40CH Switchable FPV Transmitter with UART Support OSD Configuring via Betaflight Fligh

Specifications:
Operating Voltage: 7 - 24V
Power supply: 5V camera@under 0.3A max
Output power:
25mw: 120mA @12v
200mw: 200mA @12v
500mw: 280mA @12v
800mw: 330mA @12v
Range: Up to 4km with omnidirectional RHCP antennas
Antenna connector: MMCX
Video Format: NTSC/PAL
Port connector: JST,6pin
Dimensions: 36(W)x36(D)mm, 30.5x30.5mm(hole)
Weight:7.4g(excluding antenna)

Feartures:

All 40 standard channels
5V output for camera
2S-6S input power supported
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable
Integrated with Uart, connectable to betaflight FC
0.01mW-Power up and test your system during a race with zero interference
Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera
0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
LED display for indicating CH/Band/Power

Package included:
1 x 5.8Ghz 40CH 25mW/200mW/500mW/800mW Switchable FPV Transmitter
1x Antenna and cable set
1x Product manual

Note :
Before powering the VTX up, it's very important to first installed antenna otherwise the product will have static
The vtx can power up 5V camera @ under 300mA.