• ATOMRC TX1201 5.8G 1.2W VTX top view PCB with USB port, 7-segment display and power/IO pads
  • TX1201 VTX backside PCB view showing solder traces, mounting holes and bottom antenna pad area
  • ATOMRC TX1201 5.8G 1.2W VTX board close-up showing solder pads, RF section and connector layout
  • Angled perspective of TX1201 video transmitter board showing USB port, display and component height
1 4

ATOMRC TX1201 5.8G 1.2W VTX 200/800/1200mW, 7-26V Input, LED Display, L/X Band, 30.5*30.5

ATOMRC TX1201 5.8G 1.2W VTX 200/800/1200mW, 7-26V Input, LED Display, L/X Band, 30.5*30.5

ATOMRC

$68.00 USD
$68.00 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
View full details

Overview

ATOMRC TX1201 VTX is a 5.8G / 1.2W FPV video transmitter (VTX) with 56-channel frequency support, including L Band (Low Band) and X Band. It features an LED segment display for quick status checking and supports Button control or IRC control for fast channel and power changes.

Key Features

  • Supports L Band and X Band (5G Hz) with 56 frequency channels
  • Adjustable power output: 200mW / 800mW / 1200mW
  • Wide input voltage range: 7~26V
  • LED segment display for fast status checking
  • Button / IRC control modes (select one mode)
  • Single-sided design for fast heat dissipation
  • Overheat protection
  • Built-in filter to reduce input interference from ESC (enhanced filter)

For installation or setup assistance, contact support@rcdrone.top or visit https://rcdrone.top/.

Specifications

Product ATOMRC TX1201 VTX
Power 200mW / 800mW / 1200mW
Input voltage 7~26V
Frequency 56
Mounting holes 30.5*30.5 M3
Weight 5±0.2g
Size 35.9*35.9mm

Frequency Table (56 channels)

The L-band and X-band are added to 40 regular frequencies.

Band CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
A 5865 5845 5825 5805 5785 5765 5745 5725
B 5733 5752 5771 5790 5809 5828 5847 5866
E 5705 5685 5665 5645 5885 5905 5925 5945
F 5740 5760 5780 5800 5820 5840 5860 5880
R 5658 5695 5732 5769 5806 5843 5880 5917
L 5362 5399 5436 5473 5510 5547 5584 5621
X 4990 5020 5050 5080 5110 5140 5170 5200

Wiring / Control

LED segment display behavior

  • Button Mode: LED segment display shows BAND / CH / Power
  • IRC Mode: LED segment display shows Frequency / Power

Notice

Only one mode can be used at a time: Button mode or IRC mode. If Button mode is used, the IRC protocol needs to be turned off in BF. In Button mode, the LED segment displays BAND/CH and power in sequence; in IRC mode, it displays frequency and power.

Button setup steps

  • Step 1: Hold button for 3 seconds into BAND setting mode.
  • Step 2: Under BAND setting mode, short press the button to change BAND; long press button 3s to enter CH setting mode.
  • Step 3: Under CH setting mode, short press the button to change CH; hold button 3s to enter the Power setting mode.
  • Step 4: Under Power setting mode, short press to adjust the power; long press for 3 seconds to save.

Pad labels shown

  • VCC, GND
  • 5V, GND
  • VID, VTX
  • IRC

What’s Included

  • ATOMRC TX1201 VTX board
  • RF pigtail cable (bulkhead connector + right-angle connector)
  • Hardware: nut and washer
  • Wire harness

Details

ATOMRC TX1201 5.8G 1.2W VTX overview, 56-channel FPV video transmitter with LED display and 7–26V input

ATOMRC TX1201 is a 5.8GHz FPV VTX with 56 channels (including L and X bands), LED segment status display, and 7–26V input.

Close-up of ATOMRC TX1201 VTX board highlighting the LED segment display for band, channel, and power readout

The onboard LED segment display makes it quick to confirm your band/channel and power setting at the field.

Single-sided ATOMRC TX1201 circuit board design graphic emphasizing faster heat dissipation and overheat protection

Single-sided layout helps with heat dissipation, supported by overheat protection and an enhanced input filter for ESC noise.

Button control steps for setting band, channel, and power on the TX1201 VTX (200mW, 800mW, 1200mW)

Switch bands, channels, and output power using the onboard button with simple hold/press steps.

OSD/IRC control menu and 56-channel frequency table including added L-band and X-band frequencies

IRC/OSD control supports fast frequency and power changes, with L-band and X-band options in the 56-channel table.

TX1201 VTX wiring diagram for button control and IRC control, with pad labels VCC, GND, 5V, VID, VTX, IRC

Wire the pads for either Button control or IRC control—only one control mode should be used at a time.

ATOMRC TX1201 VTX specification table with 200/800/1200mW power, 7–26V input, 30.5×30.5 M3 mountingPacking list with TX1201 VTX board, RF pigtail cable, wire harness, and mounting hardware (nut and washer)

Includes the VTX board plus RF pigtail, wire harness, and mounting hardware for installation.

Related Collections