Axisflying MANTA 30 Drone Frame, T700 Carbon Fiber 3-inch for O4 Air Unit, 160mm Wheelbase, 4mm Arms, 86.9g

Overview

Axisflying MANTA 30 FRAME is a high-strength drone frame built from T700 carbon fiber for 3-inch FPV builds. This drone frame is designed around the O4 Air Unit and a compact electronics layer, offering precise mounting for camera, stack and VTX while maintaining durability with 4mm arms and 2mm plates.

Key Features

• T700 carbon fiber construction with 2mm top, middle and bottom plates.
• 4mm arms for strength in a 3-inch class build.
• Wheelbase 160mm; measured frame weight shown as 86.9g (image), spec 86±5g including printouts.
• Camera installation width: 19–20mm; front camera aluminum mounts.
• 20mm×20mm (M3) stack installation; VTX mounting: 25.5mm & 30.5mm.
• Motor installation pattern: 12×12mm (M3); supported prop size: Max 3 inch.
• Electronics layer height: 16mm for neat component integration.
• Assembly hardware guidance (per installation images): M3×5mm countersunk screws for camera mounts/top plate, M3×8mm countersunk screws for arms, M3×20mm countersunk screws for arms & flight controller, M3×6mm screws for GoPro mount/top plate.

Specifications

What’s Included

• Carbon fiber plates: top, middle, bottom, and four arms.
• Camera aluminum mounts and rear standoffs.
• Side plates and 3D-printed parts (including provision for GoPro mount).
• Battery straps (2 pcs, visible).
• Hardware set (per packing list): M2×6 (3pcs), M2×12 (3pcs), M3×5 (7pcs), M3×8 (5pcs), M3×20 (5pcs), M2×5 (10pcs), M2×10 (5pcs), M3×6 (3pcs).

Applications

3-inch FPV drone frame builds requiring a compact, high-strength layout and O4 Air Unit-ready mounting, with 20×20 AIO stacks and 12×12 (M3) motors.

Details

Manta 30 drone frame has a 160mm wheelbase, 4mm T700 carbon fiber arms, supports 3-inch props, 6S battery, C204 motor, and F745 AIO stack. Weighs 86±5g. Includes printouts.

Installation Instructions for Manta 30 Drone Frame: 1. Install arms into designated mounting holes. 2. Secure camera aluminum mounts and rear standoffs with M3*5mm countersunk screws; arms with M3*8mm; arms and flight controller with M3*20mm countersunk screws. 3. Install 3D-printed parts and side plates; secure GoPro mount and top carbon plate with M3*6mm screws; top plate with M3*5mm countersunk screws.

Manta 30 Drone Frame features carbon fiber arms, plates, motors, screws, and fasteners. Designed for FPV drones with durable construction. Includes all necessary accessories for safe, enjoyable flights.