CHIHAI 480 Brushed DC Motors, Long/Short Shaft Models and Accessories
CHIHAI 480 Brushed DC Motors, Long/Short Shaft Models and Accessories
CHIHAI MOTOR
Couldn't load pickup availability
Overview
These CHIHAI MOTOR 480 brushed DC motors offer distinct numbered windings, shaft lengths, magnet materials and pinion configurations for compatible hobby mechanisms. Select the exact configuration using its dimensions and electrical requirements. The pinion puller and two-piece shaft-sleeve pack are separate accessories and contain no motor.
Specifications by Configuration
Speeds are voltage-specific references. Overall length includes the output shaft and pinion where fitted. Motor body length is45.5mm and width reference29.5mm in the model cards. The standard gold/blue/red M150 envelope reference is29.5×25.2×88mm; it does not describe the100mm extended or74mm short-shaft configurations.
| Model | Configuration | rpm at11.1V | rpm at7.4V | Shaft projection mm | Overall mm |
|---|---|---|---|---|---|
| 5 | N52 Purple Long Shaft | 34000 | 22000 | 30.5 | 88 |
| 6 | N35 Blue Long Shaft | 35000 | 23000 | 30.5 | 88 |
| 7 | N35 Red Long Shaft | 39000 | 26000 | 30.5 | 88 |
| 8 | N35 Gold Long Shaft | 31000 | 20000 | 30.5 | 88 |
| 40 | N10 Long Shaft | 31000 | 20000 | 30.5 | 88 |
| 41 | High-Speed Long Shaft | 46000 | 30000 | 30.5 | 88 |
| 42 | High-Torque Long Shaft | 31000 | 20000 | 30.5 | 88 |
| 43 | High-Speed Long Shaft | 46000 | 30000 | 30.5 | 88 |
| 44 | Low-Speed High-Torque | 19000 | 12000 | 30.5 | 88 |
| 45 | Extended 100mm Motor | 31000 | 20000 | 42 | 100 |
| 46 | High-Speed High-Torque | 37000 | 24000 | 30.5 | 88 |
| 47 | Ferrite Motor Without Pinion | 34000 | 22000 | 30.5 | 88 |
| 48 | Red Devil Ferrite Motor | 34000 | 22000 | 30.5 | 88 |
| 96 | N35 Blue Short Shaft | 35000 | 23000 | 15.5 | 74 |
| 97 | N35 Red Short Shaft | 39000 | 26000 | 15.5 | 74 |
| 98 | N35 Gold Short Shaft | 31000 | 20000 | 15.5 | 74 |
| 99 | N52 Purple Short Shaft | 35000 | 23000 | 15.5 | 74 |
Construction and Pinion Differences
| Model | Magnet reference | End cap | Pinion | Housing / selection note |
|---|---|---|---|---|
| 5 | N52 NdFeB | CNC aluminum | MIM steel pinion | 6 vents |
| 6 | N35 NdFeB | CNC aluminum | MIM steel pinion | 6 vents |
| 7 | N35 NdFeB | CNC aluminum | MIM steel pinion | 6 vents |
| 8 | N35 NdFeB | CNC aluminum | MIM steel pinion | 6 vents |
| 40 | N10 bonded rare-earth | PPS | Gold MIM steel pinion | 8 angled vents |
| 41 | N35 NdFeB | Heat-resistant nylon | Hardened powder-alloy pinion | Closed housing |
| 42 | N35 NdFeB | Heat-resistant nylon | Hardened powder-alloy pinion | Closed housing |
| 43 | N35 NdFeB | PPS | Hardened powder-alloy pinion | Closed housing |
| 44 | N35 NdFeB | CNC aluminum | MIM steel pinion | Closed housing;25000rpm at14.8V reference |
| 45 | N35 NdFeB | CNC aluminum | Hardened powder-alloy pinion | 6 vents |
| 46 | N35 NdFeB | CNC aluminum | MIM steel pinion | 8 angled vents |
| 47 | Wet-pressed ferrite | Heat-resistant nylon | No pinion included | Closed housing;13:1–16:1 gear mechanisms not recommended |
| 48 | Wet-pressed ferrite | Heat-resistant nylon | MIM steel pinion | Closed housing;13:1–16:1 gear mechanisms not recommended |
| 96 | N35 NdFeB | CNC aluminum | MIM steel pinion | 6 vents |
| 97 | N35 NdFeB | CNC aluminum | Hardened powder-alloy pinion | 6 vents |
| 98 | N35 NdFeB | CNC aluminum | Hardened powder-alloy pinion | 6 vents |
| 99 | N52 NdFeB | CNC aluminum | MIM steel pinion | 6 vents |
All numbered motor cards specify ball-bearing support, carbon brushes and an electrically balanced armature. Venting, end caps and magnet construction vary by model. No47 is supplied without a pinion; other motor photographs show the pinion configuration to be checked against the mating mechanism.
Standard M150 Long-Shaft Performance
The following11.1V operating points apply specifically to long-shaft No8 Gold,No6 Blue andNo7 Red M150 configurations. They do not apply to No5/99 N52 motors, other windings, or the short-shaft96–99 models. Torque units differ between the gold and blue/red tables.
11.1V Long-Shaft 8 Gold M150
Winding reference:CHF-480WD-7516T-87D. Torque unit:gf·cm.
| Operating point | Speed rpm | Current A | Torque gf·cm | Output W | Efficiency% |
|---|---|---|---|---|---|
| No load | 31000 | 2.8 | — | — | — |
| Stall limit | 0 | 167.371 | 5134.3 | — | — |
| Maximum efficiency | 26700 | 20.90 | 564.8 | 154.66 | 66.66 |
| Maximum output power | 15000 | 85.09 | 2567.1 | 394.95 | 41.82 |
11.1V Long-Shaft 6 Blue M150
Winding reference:CHF-480WD-8015T-87D. Torque unit:mN·m.
| Operating point | Speed rpm | Current A | Torque mN·m | Output W | Efficiency% |
|---|---|---|---|---|---|
| No load | 35000 | 3.0 | — | — | — |
| Stall limit | 0 | 89.67 | 274.45 | — | — |
| Maximum efficiency | 29588 | 16.40 | 42.44 | 131.6 | 72.27 |
| Maximum output power | 17500 | 46.33 | 137.23 | 251.64 | 48.92 |
11.1V Long-Shaft 7 Red M150
Winding reference:CHF-480WD-7515T-87D. Torque unit:mN·m.
| Operating point | Speed rpm | Current A | Torque mN·m | Output W | Efficiency% |
|---|---|---|---|---|---|
| No load | 39000 | 4.20 | — | — | — |
| Stall limit | 0 | 170.1 | 451.5 | — | — |
| Maximum efficiency | 33272 | 26.73 | 61.31 | 213.8 | 72.05 |
| Maximum output power | 19250 | 87.15 | 225.75 | 455.36 | 47.07 |
Stall figures are reference limits, not permitted operating conditions. Maximum-output-power and maximum-efficiency values are distinct test points, not continuous-duty ratings. Use wiring, switching and a power supply suitable for startup/load current; stop if the motor stalls or overheats.
Electrical and Installation Guidance
Use the selected model's voltage and speed references. Most numbered configurations provide7.4V and11.1V data; only No44 also specifies a14.8V/25000rpm operating reference. Do not apply14.8V to other models by association. High-speed41/43 references favor7.4V operation to limit heating. Check shaft length, pinion type and mating-gear fit before installation; similarly named hobby platforms do not establish universal compatibility.
Electronic trigger/controller compatibility varies. Mechanical-switch use is recommended for high-speed7/41/42/43/46/47/48/97 configurations; avoid frequent active braking or rapid single-cycle reversals that overheat the motor or switching electronics. Models with stated electronic-control compatibility still require a correctly rated controller and wiring.
For higher-demand5/6/7/40/41/42/43/45/46/96/97/98/99 installations, the model guidance calls for a high-current connection such as XT30 and adequately sized wiring; several references specify at least1mm² conductors. A connector alone does not establish system current capability. No47/48 use2.8mm terminal connections; verify the actual connector and avoid soldering damage. Disconnect power before wiring or changing the pinion. Never force a misaligned gear or operate continuously stalled.
Accessory-Only Options
- Motor Pinion Puller Only:one gear-removal tool; motor and pinion are not included. Verify the tool fits the pinion and shaft.
- 32.5mm Bearing Shaft Sleeves –2PCS:two bearing-support sleeves;32.5mm length and9mm diameter reference. This option contains no motor. Verify bore, cup and motor-fit dimensions before installation.
What's Included
One motor of the selected numbered configuration, with the pictured pinion where specified, or the separately selected pinion puller or two-piece sleeve pack. Motor+tool or motor+sleeve bundles are not implied. Power supply, controller, complete mechanism and other motors in comparison images are not included. Standard M150 motor mass is approximately150g and its boxed reference185g; other configurations and packaging vary.
Visual Details
