DarwinFPV ApeStyle D6 DC FPV Frame Kit 245mm, 5mm Arms

Overview

DarwinFPV ApeStyle D6 is a drone frame designed for adaptable FPV builds, using a DC frame structure with a single quick-release boom arm layout. It provides standardized mounting patterns and clear internal spacing for common stacks, VTX, and camera installations.

Key Features

Multiple configuration concept in the ApeStyle series: 5/6-inch frames, DC/XH structures, and analog/HD video transmission options (this D6 frame kit is the DC structure model).
Thickened mortise-and-tenon arm base design intended to resist breaking and reduce play.
Reserve dual XT60 plug positions for flexible wiring (front and rear).

Specifications

Model	ApeStyle D6 Frame
Frame Structure	DC
Arm Structure	Single quick-release boom
Wheelbase	245mm
Weight	156.2±5g
Arm Plate Thickness	5mm
Mid Plate Thickness	2mm
Bottom Plate Thickness	2.5mm
Camera Plate Thickness	2mm
FC Mounting Holes	30.5mm x 30.5mm
VTX Mounting Holes	20 x 20mm / 25.5 x 25.5mm
Motor Mounting Holes	16 x 16mm
Stack Installation Space	25mm
VTX Installation Space	25mm
Camera Spacing	20mm
Standard TPU Bases	Front TPU
Recommended Motor	DarwinFPV 2207 - 2507
Recommended Battery	6S-1500mAh XT60
Recommended ESC	Above 50A
Recommended Propeller	Gemfan 6032-3
Recommended takeoff weight	Under 500-800g

What’s Included

Bottom plate
Medium plate
Ceiling plate
Side panel
Boom (arms)
GPS printout
Antenna base 3D printed part
125 x 70mm transparent sticker
2 x 100mm nylon cable tie
M3*5 screws
M3*6 screws
M3*10 screws
M3 nut
M2*6 screws

Video

Important Notes & Safety Guidelines

Flight compliance: Fly only in approved airspace and follow local drone regulations.
Configuration check: Confirm the required build configuration before ordering.
Pre-flight inspection: Check frame fasteners, arms, motors, and all connections before flight.

For build or compatibility questions, contact support@rcdrone.top or visit https://rcdrone.top/.

Details

DarwinFPV ApeStyle D6 FPV drone frame kit on freestyle quad build, ApeStyle series overview graphic

ApeStyle D6 is built around a roomy 245mm platform for adaptable 5–6 inch FPV builds with clean component spacing.

ApeStyle frame structures comparison graphic showing XH structure vs DC structure layout options

Choose the DC structure for a straightforward, easy-to-service layout while keeping standard mounting patterns for common FPV stacks.

Exploded view of thickened mortise-and-tenon arm base and quick-release boom arm parts for crash resistance

A thickened mortise-and-tenon arm base helps reduce arm play and improves durability for repeat builds and repairs.

ApeStyle drone graphic highlighting front-mounted GPS module placement (feature depends on version)

Night flying promo graphic highlighting LED tail lights and dual buzzer locator (feature depends on version)

Close-up promo of full-cover motor guard around prop and motor (premium version feature)

Close-up promo of sintered nylon side plate detail on ApeStyle frame (premium version feature)

Promo graphic of extended top plate allowing larger battery mounting area for longer flight setups

Top view of ApeStyle DC frame layout highlighting reserved dual XT60 connector positions front and rear

Reserved XT60 positions at the front and rear make it easier to route power wiring to match your preferred build layout.

DarwinFPV ApeStyle D6 frame kit packing list showing plates, arms, TPU parts, screws, sticker and cable ties

Everything needed for the frame build is included—carbon plates, booms, TPU parts, and a complete screw set.

ApeStyle D6 DC frame specifications table with 245mm wheelbase, 5mm arms, and 30.5x30.5mm FC mount

Key fitment details include a 30.5×30.5mm FC mounting pattern, 25mm stack space, and 5mm arm thickness.

Item added to your cart

DarwinFPV ApeStyle D6 Drone Frame Kit (DC Structure) 245mm Wheelbase, 5mm Arms, 30.5mm FC Mount