• DarwinFPV CineApe35 FPV Frame assembled with grey duct guards and yellow camera mounts, top view
  • DarwinFPV CineApe35 FPV Frame straight top-down view showing carbon plates and ducted guard layout
  • Top-down view of frame with carbon center plate and four circular duct guards, yellow mount installed
  • Yellow TPU camera mount bracket, front view with dual screw ears
  • Square black mounting gasket or spacer frame, shown alone
  • Yellow TPU camera mount bracket shown centered, same style with dual ears and slotted base
  • Yellow TPU camera mount bracket close-up, enlarged view of opening and slotted base
1 7

DarwinFPV CineApe35 FPV Frame 3.5 Inch Whoop, 151.5mm Wheelbase, Injection-Molded Prop Guard

DarwinFPV CineApe35 FPV Frame 3.5 Inch Whoop, 151.5mm Wheelbase, Injection-Molded Prop Guard

DarwinFPV

$74.99 USD
$74.99 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
version
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
View full details

Overview

DarwinFPV CineApe35 FPV Frame is a 3.5-inch whoop-style frame designed to support cinematic payloads (including a full-size GoPro), freestyle, and general safer flying with a full propeller guard. The frame uses a one-piece, injection-molded propeller guard for durability and added protection.

The frame is designed for broad VTX compatibility and is stated to be suitable for DJI O3 Air Unit with shock absorption to help avoid rolling-shutter artifacts. It also supports a front-mounted GPS module position; however, the GPS shown is only used to identify versions and is not included in the shipment.

Key Features

  • High-strength, one-piece injection-molded propeller guard for durability and protection
  • VTX mounting compatibility: 20 x 20 mm / 25.5 x 25.5 mm / 30.5 x 30.5 mm
  • DJI O3 Air Unit compatibility noted, with shock absorption effect to help avoid rolling shutter
  • Front-mounted GPS module position to help maintain distance from potential interference sources (GPS not included)

Specifications

Frame structure Ture-X
Wheelbase 151.5 mm
Arm thickness 3.5 mm
Top plate thickness 3.5 mm
Bottom plate thickness 2 mm
FC mounting holes 25.5 x 25.5 mm / 30.5 x 30.5 mm
VTX mounting holes 20 x 20 mm / 25.5 x 25.5 mm / 30.5 x 30.5 mm
Motor mounting holes 12 x 12 mm
Suitable propeller size 3.5 inch

Model Comparison

Item CineApe35 Analog/Wasp Version Frame CineApe35 O3 Version Frame
Dimension 213 x 213 x 64 mm 213 x 213 x 73 mm
Camera installation space 14 mm 20 mm
FC installation space 25 mm 33 mm
TPU accessories Antenna mount base; Camera mount base Antenna mount base; Camera mount base; O3 mount pad
Weight 124 g ± 5 g 127 g ± 5 g

Recommended (from manufacturer)

Motor 2004-2006
Battery 4-6S 1300-1500 mAh 100C XT60
ESC Above 35A
Propeller GEMFAN D90S-3
Takeoff weight 500-800 g

What’s Included

  • 1 x Top plate
  • 1 x Bottom plate
  • 1 x Protective guard
  • 1 x Injection Molding Guard EVA Bumper Strip
  • 5 x EVA sponge foot pad (30 x 15 x 10 mm)
  • 2 x Battery anti-slip pad
  • 2 x Battery strap (15 x 210 mm)
  • 1 x Spare screws pack
  • 1 x Antenna mount (mount base)
  • 1 x Camera mount (mount base)
  • 1 x Sticker (logo sticker shown as 120 x 120 mm)

Camera Mount Update Note

The V2 version of the camera mount was updated on 2015.1.4. The main difference between V2 and the previous V1 is the GPS installation hole size: after the GPS module was replaced with a smaller unit of the same function, the GPS hole in the V2 printout became smaller accordingly. The GPS shown is only for version identification and is not included in the shipment.

Applications

  • 3.5-inch whoop FPV builds for cinematic filming, freestyle, and general flying
  • Builds using common FC and VTX mounting patterns (20 x 20 / 25.5 x 25.5 / 30.5 x 30.5)

For build compatibility questions (Analog/Wasp vs O3 frame versions) or spare parts support, contact support@rcdrone.top or visit https://rcdrone.top/.

Details

CineApe35 camera mount versions (V1/V2) for Analog/Wasp and O3 builds; GPS module used only for reference

Choose the correct camera mount version for your CineApe35 build (Analog/Wasp or DJI O3); the GPS module is for version identification and isn’t included.

DarwinFPV CineApe35 FPV Frame one-piece injection-molded propeller guard for durable 3.5-inch whoop builds

A one-piece injection-molded prop guard adds durability and extra protection for safer 3.5-inch cinewhoop flying.

Carbon top plate with 20/25.5/30.5 mm VTX mounting pattern and shock-absorbing setup for DJI O3

Multiple VTX mounting patterns help fit common stacks, with a shock-absorbing layout intended to reduce jello with DJI O3 setups.

Front GPS module mounting position on CineApe35 frame to keep the module away from interference sources (GPS not included)

A front-mounted GPS position is built into the layout to help keep the module away from potential interference sources.

Top-down comparison of CineApe35 Analog/Wasp frame and CineApe35 O3 frame layout with full prop guards

Two frame options are available, with the O3 version providing more camera and stack installation space.

DarwinFPV CineApe35 frame specifications chart: True-X, 151.5 mm wheelbase, 3.5 mm arms, mounting patterns

Key dimensions and mounting-hole patterns are summarized to help confirm compatibility with your components.

CineApe35 FPV frame packing list: top/bottom plates, protective guard, injection molding guard, straps, pads, screws

Included parts cover the core frame plates and guards, plus mounting hardware, straps, and pads to finish a clean build.

Related Collections