GEPRC DarkStar25 WTFPV 4S CineWhoop FPV Drone
GEPRC DarkStar25 WTFPV 4S CineWhoop FPV Drone
GEPRC
Couldn't load pickup availability
Overview
The GEPRC DarkStar25 WTFPV is a compact CineWhoop quadcopter built on the GEP-DS25 frame. This WTFPV version is supplied without a video transmitter, camera, or antenna, allowing pilots to configure a compatible FPV video system. Its five-point suspension damping system, protected ducted frame, and bottom-mounted XT30U-M battery connector support a tidy and serviceable build.
Key Features
- Five-point suspension damping system designed to reduce vibration transfer.
- Retaining screws secure the damping balls and help keep the upper frame in place after impacts.
- Dedicated rear mount supports the optional GEP-M10 Nano GPS module.
- Fast-release frame design separates the upper and lower sections with five screws for maintenance access.
- Front USB port for configuration and firmware updates.
- TAKER F722 35A AIO flight controller with clearly labeled solder pads.
- COB LED strip lighting.
For setup assistance or product support, contact rcdrone.top.
Specifications
| Model | DarkStar25 WTFPV |
| Frame | GEP-DS25 |
| Main Plate Thickness | 2.5mm |
| Wheelbase | 115mm |
| Flight Controller / ESC | TAKER F722 35A AIO, 32Bit |
| MCU | STM32F722 |
| Gyro | ICM42688-P |
| Firmware | GEPRC_TAKER_F722_AIO |
| Flash Memory | 16MB |
| ESC Rating | 35A continuous / 45A burst |
| Motors | SPEEDX2 1404 4600KV |
| Propellers | HQProp DT63MMX3 V2 |
| Battery Connector | XT30U-M |
| Receiver Options | PNP or ELRS 2.4G |
| Video Transmitter | Not included |
| Camera | Not included |
| Antenna | Not included |
| GPS | Optional GEP-M10 Nano |
| Weight | 145g |
| Recommended Battery | LiPo 4S 750mAh-850mAh |
| Flight Time | 6min 20s-8min 30s under smooth cruising conditions |
What's Included
- 1 x DarkStar25 WTFPV quadcopter
- 1 x Top cover
- 1 x Canopy
- 1 x Battery pad
- 2 x pairs HQProp DT63MMX3 V2 propellers
- 1 x 15 x 150mm battery strap
- 1 x 1.5mm L-shaped screwdriver
- 2 x Battery anti-slip pads
- 1 x Damping ball punch tool
- 1 x Binding pin
- 1 x Type-C cable
- 5 x Camera mount damping balls
- 4 x M2 x 4.5 button-head screws
- 4 x M2 x 7 button-head screws
- 4 x M2 x 6 countersunk screws
- 4 x M2 x 6 button-head screws
Details
Five-point damping, a bottom-mounted XT30U-M connector, and a rear GPS provision support a clean, serviceable build.
The five-point suspension system is designed to reduce vibration transfer for smoother footage.
Retaining screws help secure the damping balls and keep the upper frame in place after impacts.
A dedicated rear mount accommodates the optional GEP-M10 Nano GPS module.
The upper and lower frame sections separate with five screws for quicker maintenance access.
The WTFPV version is supplied without a video transmitter, camera, or antenna, ready for a compatible FPV video-system installation.
The TAKER F722 35A AIO combines the flight controller and 35A continuous ESC in a compact layout.
Clearly marked solder pads make wiring, assembly, and future servicing more straightforward.
Convenience details include a front USB port for configuration, COB LED lighting, and an accessible battery connection.
Protected ducts surround the 63 mm three-blade propellers for the compact CineWhoop layout.
The 115 mm wheelbase frame pairs compact dimensions with a bottom-mounted XT30U-M battery connector.
The spare hardware pack includes M2 button-head and countersunk screws in multiple lengths, plus five damping balls for maintenance.