HDZero Camera Switcher 2 Camera Switcher Board for Dual HDZero MIPI Cameras on One VTX (20×20mm)

Overview

HDZero Camera Switcher 2 is a camera switcher board that lets a single HDZero VTX run two HDZero MIPI cameras and switch between them instantly during operation. In the default configuration, setup is plug-and-play: connect the MIPI cables and assign Camera Control 1 to a switch in Betaflight, iNav, or ArduPilot (no soldering required in Standard Mode).

It enables use cases such as day vs night vision (IR-cut vs IR-cut-removed cameras), forward vs downward views, rear-view cameras on RC cars, or wide vs zoom lenses. Switching is nearly instantaneous when using two cameras of the same generation. Advanced builders can also use VTX-only control, manual GPIO control, and daisy-chaining to run more than two cameras.

Key Features

• Instant switching between two HDZero cameras
• Plug-and-play: no soldering in Standard Mode
• Works with Betaflight, iNav, and ArduPilot via Camera Control 1
• Powered directly from the VTX (no extra wiring)
• Independent camera settings when controlled through the FC
• Advanced jumper options for manual control and multi-board setups
• Lightweight 20×20 mm board that fits directly into your stack

For product and setup support, contact https://rcdrone.top/ or email support@rcdrone.top.

Specifications

Applications

• FPV drones: switch between forward/downward cameras or different lenses
• RC cars: add a rear-view camera option
• Robotics: multi-view camera switching on a single HDZero VTX

Video