Overview
The HDZero Whoop V2 Bundle combines the HDZero Whoop V2 VTX and HDZero Nano V3 Camera with installation accessories for HDZero digital FPV builds using HDZero MIPI cameras.
Key Features
- Supports all HDZero MIPI cameras (MIPI video connector)
- Video modes: 720p60 / 540p90 / 1080p30
- RF power output: 25 mW / 200 mW
- 5.725 – 5.850 GHz frequency range
- Secured U.FL RF connector with brass retention bar
- Thicker PCB for improved impact resistance
- Pre-soldered wire harness for easier installation
Specifications
Whoop V2 VTX
| Supported Cameras | All HDZero MIPI cams |
| Video Resolution / Frame Rate | 720p60 / 540p90 / 1080p30 |
| RF Power Output | 25 mW / 200 mW |
| Frequency Range | 5.725 – 5.850 GHz |
| RF Connector | Secured U.FL with brass bar |
| Video Connector | MIPI |
| Durability / PCB | Thicker PCB for impact resistance |
| Wiring / Install | Pre-soldered wire harness |
| Size | 31 × 31 mm (29 × 29 inner) |
| Mounting Pattern | 25.5 × 25.5 mm (M2) |
| Weight | 5.4 g (5.1 g w/o wires) |
| Board Thickness | ~1.6 mm |
| Power Input | 3 – 12.6 V (1S – 3S) |
| Power Consumption | 5 – 6 W |
| Control / OSD | MSP OSD / Smart Audio |
| Recommended Use | 80 mm whoops – 4″ micro drones |
| Mounting Hardware | M2 grommets + brass bar included |
| Antenna Included | Not included |
| Alternative for Ultralight Builds | HDZero AIO (FC + VTX, AHD interface) |
Nano V3 Camera
| Size | 14x16x14mm |
| Weight | 2.2 gram |
| Sensor | 0.5 inch, up to 10650 mV/Lux-sec; Ultra-high sensitive CMOS sensor |
| FOV | FOV D:155° H:126° V:94° |
For installation and setup help, contact support@rcdrone.top or visit https://rcdrone.top/.
What’s Included
- HDZero Whoop V2 VTX × 1
- HDZero Nano V3 Camera × 1
- Dipole Antenna × 1
- 40 mm MIPI Cable × 1
- Rubber Grommet (M3 to M2) × 4
- u.FL Antenna Retention Screws × 3
- Metal bar × 1
Applications
- HDZero digital FPV builds on 80 mm whoops to 4″ micro drones
Related Collections
