Overview
The HGLRC Draknight 2-Inch 2S RTF FPV Kit is the perfect entry-level solution for beginners looking to dive into the FPV world. This fully pre-assembled Ready-To-Fly (RTF) kit includes everything needed to start flying immediately—featuring the Draknight 2” drone, ELRS remote controller, 5.8GHz analog FPV goggles, and two 720mAh 2S LiPo batteries. Its lightweight build and compact frame make it ideal for both indoor and outdoor flying.
The Draknight is powered by a 2S LiPo system, paired with a Specter 1003 10000KV motor, delivering agile control and reliable performance. The integrated 400mW adjustable VTX ensures smooth analog video transmission, and the built-in UART ExpressLRS 2.4GHz receiver offers long-range signal stability. With a modular ELRS wireless dongle, high-efficiency charger, and intuitive C1 controller included, this kit makes learning FPV simple and affordable.
Drone Specifications – HGLRC Draknight
-
Frame Size: 104×104mm (91.8mm wheelbase)
-
Motor: Specter 1003 10000KV (optimized for 2S)
-
Propeller Recommendation: Gemfan 2023
-
Flight Controller: HGLRCF411SX1280_15A
-
Firmware: Betaflight HGLR-HGLRCF411SX1280_15A
-
Built-in Receiver: UART ExpressLRS 2.4GHz
-
ESC Protocol: DShot150/300/600
-
ESC Firmware: Z-H-30 (Blheli_S)
-
Continuous Current: 12A
-
Peak Current: 15A (5s burst)
-
Input Voltage: 2–4S LiPo
-
BEC Output: 5V/1.5A
-
VTX Power: 0/25/100/400mW adjustable
-
Max Supported Prop Size: 2 inches
-
Weight: 44.3g (excluding receiver)
Remote Controller – HGLRC C1
-
Model: HGLRC C1 with ELRS Dongle
-
Operation Functions: Frequency Pairing, Power Adjustment, Joystick Calibration
-
Switches: Mix of 2-stage and 3-stage
-
Module: Built-in 500mW
-
Interfaces: USB-A and USB-C
-
Control Distance: Extended, long-range
-
Screen: Not required (simplified operation)
-
Compatibility: ELRS receivers and third-party tuners
-
Type: Entry-level handle control
ELRS Wireless Dongle Specifications
-
ELRS Firmware Version: ELRS 3.0
-
Firmware Upgrade: WiFi or USB
-
Protocol: CRSF
-
Max Frequency: 250MHz
-
Receiving Distance: >200m
-
Voltage: 5V
-
Interface: USB-C
-
Weight: 9.5g
-
Size: 74×21×12.5mm
-
Firmware Name: HGLRC 2.4GHz
Included in the Box
-
1x HGLRC Draknight 2-Inch FPV Drone
-
1x HGLRC C1 ELRS Remote Controller
-
1x Wireless ELRS Dongle
-
1x VR100 5.8GHz Analog FPV Goggles
-
2x 720mAh 2S LiPo Batteries
-
1x C3 Battery Charger
-
1x Charge Power Cord
-
1x USB-C Charging Cable
-
1x Micro Data Cable
-
1x 3.5mm Audio Conversion Cable
-
1x 915MHz FPC Antenna
-
8x 2-Inch Propellers
-
1x Propeller Removal Tool
-
1x M2 Hex Wrench
-
1x Philips 1.5 Screwdriver (82mm)
-
1x Sticker Pack
-
1x HGLRC Instruction Manual
-
1x C3 Charger Manual
-
1x Carrying Case
-
1x Setup Card
Details

Draknight 2-inch RTF Set includes controller, drone, FPV goggles, and portable case for beginners. Ideal starter kit!

Draknight RTF Set includes drone, remote control, and goggles. Ideal for beginners and FPV teaching.


Three flight modes: Self-stabilizing (easy), Semi-autonomous (moderate), and Manual (difficult). Each mode increases in complexity, catering to beginners to experienced FPV pilots. One-click switching available.

Silent flight: Low noise indoors and outdoors, measured at 59.7 dBA.


Exclusive PID tuning for V version modes. Detailed settings for roll, pitch, yaw in proportional, integral, derivative, and feedforward parameters are displayed.

HGLRC Draknight 2-Inch 2S FPV drone weighs about 44.3 grams, displayed on a digital scale.

HGLRC Draknight 2-Inch 2S FPV supports multiple simulators like FPV Logic, DCL, Liftoff, DRL, TRYP, FPV-Uncrashed, Launcher (TBS Simulator), etc. RTF set includes batteries.

HGLRC wireless dongle for cable-free use, reserves 3.5MM socket.

Goggles feature new refraction design, small size, lightweight, adjustable focus, and support 0-700 degrees myopia. Perfect for comfortable vision correction.

Compact case holds FPV gear, ensuring stress-free travel with essentials.

The Draknight Remote Control Dongle features a built-in ELRS system with a refresh rate of 250Hz and frequency of 250hz. It has a receiving distance of over 200m and uses the STMBZF4TI MCU and potentiometer sensor. The binding method involves using a built-in ipex antenna and ICM42688P GYRO. The device can quickly power on/off with three generations of copper tube antenna.

Product list includes packing box, Draknight drone, VR goggles, remote control, charger, power cord, wireless dongle, antenna, propeller extractor, propellers, wrench, screwdriver, cables, batteries, manual, sticker, instructions, and card.
Related Collections

Explore More Drones & Accessories
-
Camera Drone
Our Camera Drone Collection features a wide range of brands including FIMI,...
-
Drone Accessories
Discover a wide range of drone accessories to enhance flight performance, extend...