HOTRC DS-600 6CH 2.4GHz Transmitter with F-06A Receiver for RC Boat, GFSK FHSS, 300m Ground Range

Overview

The HOTRC DS-600 6CH 2.4GHz Radio System is a transmitter remote controller with the F-06A 6-channel receiver for RC Boat applications. Operating on the 2.4GHZ ISM band with GFSK modulation and FHSS spread spectrum, it provides six control channels via a CH1/CH2 rocker and dedicated CH3–CH6 keys. The system features a clear display for transmitter/return voltage and status icons, a ground RF distance of ≈300m (reference), and a built-in 1200mAh lithium battery with 5V charging and indicator lights.

Key Features

Control & Interface

• 6 channels: CH1/CH2 rocker, CH3–CH6 buttons, CH1/CH2 fine tuning.
• Constant speed function adjustable by the OK button with audible prompts.
• Hybrid control modes: 1/2 channel and 3/4 channel mixed control.
• Channel reverse for CH1/CH2; rudder stroke adjustment with 10 segments.
• Locking function for CH1 and CH2 fine-tuning keys; automatic shutdown after 15 minutes of inactivity with 1-minute audio prompt.
• Display icons for signal, lock, hybrid control; voltage return interface on the receiver.

Radio Performance

• 2.4GHZ ISM band, GFSK modulation, FHSS spread spectrum.
• RF power: ≈90MA; reaction speed: PWM≤20MS.
• Receive sensitivity: -96dbm; channel resolution: 4096.
• Ground RF distance: ≈300m (reference).

F-06A Receiver

• Input voltage: DC 4V–9V; 6 PWM output channels (CH1–CH6).
• Servo modes: analog 50Hz, digital 333Hz.
• Pulse width: 500μs–2500μs; steering gear width: 1000μs–2500μs.
• Code matching button, signal indicator light, voltage return interface.

Specifications

What’s Included

• HOTRC DS-600 Transmitter
• HOTRC F-06A 6-channel Receiver

Applications

Designed for RC Boat & Ship models. The listed model type also covers Car/Ferry/Tank, depending on configuration.

Manuals

Code Matching

Power the receiver, press the BING button, then turn on the transmitter. Receiver light states: slow flash (no signal), flashing (frequency matching), steady on (connected).

Loss of Control Protection

Protects the throttle channel to default/set value if signal is lost. Enter setting by holding OK, then configure; exit by pressing OK.

Constant Speed

Adjust via the OK button. Throttle increases or decreases by a constant speed of 10 each step with audible prompts.

Hybrid Control

Two modes: 1/2 channel and 3/4 channel mixed control. Enable by holding channel key 3 while powering on; cycle to switch modes.

Channel Reverse

Set positive/negative direction for CH1 or CH2 by holding channel key 4 while powering on, then flipping the joystick.

Rudder Setting

Adjust stroke for each channel by holding channel key 5 while powering on; 10 segments from maximum to minimum, adjustable in cycles.

Locking Function

Lock/unlock CH1 and CH2 fine-tuning keys by holding channel key 6 while powering on; icons show status.

Automatic Shutdown

Shuts down after 15 minutes without operation; audio prompt 1 minute before shutdown.

Receiver Notes

Protect the antenna from breakage and magnetic interference; receiver is not waterproof; input voltage must not exceed 12V; use a regulated power supply.

Details

HOTRC DS600 Transmitter Quick Start Guide with red buttons and display

HOTRC DS-600 transmitter with antenna, display, control buttons, channels, and charging port.

Instructions for HOTRC DS-600 transmitter include code matching, loss of control protection setup, and constant speed adjustment via OK button and throttle lever controls.

HOTRC DS-600 offers hybrid 1/2 and 3/4 channel modes with single-channel reverse. Switch modes by holding buttons at power-on; on-screen icons display active mode.

Rudder setting allows stroke adjustment via channel key 5. Locking function secures fine-tuning keys using channel key 6. Automatic shutdown occurs after 15 minutes of inactivity with a 1-minute audio alert.

HOTRC DS600 transmitter: 1200mAh battery, 6-channel 2.4GHz RF, GFSK/FHSS modulation, 300m range, DC 4V–9V. Charging indicator—red (charging), green (full). Compact, reliable control for RC models.

HOTRC F-06A receiver specifications: channel outputs, signal indicators, servo modes, voltage return. Includes code matching, mode switching, antenna care, waterproofing, and voltage safety guidelines.