JHEMCU RuiBet 55A 3-6S 4-in-1 ESC BLHeli_S Bluejay J_H_15 DShot600, 30.5mm Mount for FPV Drone

JHEMCU

$45.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Options 55A 45A 50A 60A 65A

Quantity

View full details

Overview

The JHEMCU RuiBet 55A 4-in-1 ESC is a 3–6S BLHeli_S electronic speed controller designed for FPV drone builds. It supports DShot600 signal input and integrates current sensing (CUR pad) for compatible flight controllers.

Key Features

4-in-1 ESC for quad-motor FPV drones (M1/M2/M3/M4 outputs)
Input voltage: 3–6S (11–27V)
BLHeli_S firmware (Bluejay target J_H_15; file noted as BLHELI_S J_H_15_REV16_7.HEX)
Current sensor output: CUR pad
No BEC (an external 5V/9V supply is required if the build needs it)

Specifications

Brand	JHEMCU
Series	RuiBet
Type	4-in-1 ESC
Continuous current	55A * 4
Input voltage	3–6S (11–27V)
BEC	None
Current sensor	Yes
Mounting hole spacing	30.5mm / M4 (30.5MM * 4MM)
Board size	39.5 * 41mm
Weight	14.5g
Firmware	BLUEJAY J_H_15 (also listed as BLHELI_S J_H_15_REV16_7.HEX)
Signal support (from product title)	DShot600

Pad / Wiring Labels

Motor outputs: M1, M2, M3, M4
Power pads: + and - for 3–6S LiPo input
Flight controller pads: VCC, GND, CUR, plus M1/M2/M3/M4 signal pads

What's Included

JHEMCU RuiBet 4-in-1 ESC board (55A version)
Capacitor marked 1000uF 35V
Power leads (red/black)
ESC-to-flight-controller cable/harness
XT60 connector (as supplied)
Install accessories such as silicone grommets and heat-shrink (as supplied)

For compatibility checks or wiring support, contact [email protected] or visit https://rcdrone.top/.

Variant Reference (from provided option values / images)

Available options

45A; 50A; 55A; 60A; 65A

Model	RuiBet45A	RuiBet55A	RuiBet60A	RuiBet65A
Input voltage	3–6S (11–27V)	3–6S (11–27V)	3–6S (11–27V)	3–6S (11–27V)
Continuous current	45A * 4	55A * 4	60A * 4	65A * 4
BEC	None	None	None	None
Current sensor	Yes	Yes	Yes	Yes
Mounting hole spacing	30.5MM / M4	30.5MM / M4	30.5MM / 4MM	30.5MM / 4MM
Outer size	39.5 * 41MM	39.5 * 41MM	43 * 44.4MM	43 * 44.4MM
Firmware (listed)	BLHELI_S J_H_15_REV16_7.HEX
Weight	14.5g	14.5g	15.5g	15.5g

Details

Top-side view of JHEMCU RuiBet 55A 3–6S 4-in-1 FPV drone ESC board with 30.5mm mounting holes

Designed for 3–6S FPV builds, the RuiBet 55A 4-in-1 ESC combines four motor channels on one compact stack-friendly board.

Front and back view of a JHEMCU RuiBet 45A BLHeli_S 3–6S 4-in-1 ESC board with labeled pads

Pad labels for motor outputs and flight-controller wiring are printed on the board to speed up clean, reliable soldering.

Close-up of ESC solder pads and battery power pads (+/–) with large through-hole connection points

Large power pads and clearly separated edge pads make it easier to route battery leads and motor wires on tight builds.

ESC on digital scale reading 14.5g, JHEMCU RuiBet 45A BLHeli_S 3–6S board

Lightweight 4-in-1 layout helps keep all-up weight down while retaining full 3–6S capability.

Package contents: RuiBet 45A 4-in-1 ESC, 1000uF 35V capacitor, XT60 lead, power wires and signal harness

Included capacitor, wiring, and harness simplify installation; add an external 5V/9V supply if your build requires BEC power.

Angled view of JHEMCU RuiBet 55A BLHeli_S 3–6S 4-in-1 ESC with M1–M4, CUR, GND and VCC pads labeled

Wiring layout for 4-in-1 ESC to flight controller, four motors, and 3–6S LiPo battery connections

A straightforward wiring layout connects M1–M4 motor outputs, battery +/– input, and the CUR pad for current sensing on compatible flight controllers.