T-PRO-ELRS-SE is built-in 100mw, with a control distance of 7km and a return transmission distance of 3km.

ELRS SE version is based on the ELRS version for downsizing, the built-in module is only 100mW, other configurations and ELRS version remain the same.

CC2500 version:

External NANO interface, ELRS compatible

Nano/TBS CRSF Nano HF head

Compatible with D8,D16,S-FHSS,Hitec,

Radiolink Esky and other protocols

4IN1 version:

External NANO interface, compatible with ELRS

Nano/TBS CRSF Nano and other HF heads

Support multiple types of casters and receivers, such as;

DSM2/X.FrSKY, SFHSS

Flysky. FlySky AFHDS2A,

Hubsan, etc. (including CC2500 protocol)

ELRS version:

Built-in ELRS high-frequency head

Use only ELRS receivers

ELRS SE version:

Built-in ELRS high-frequency head

Only ELRS receivers can be used

(The ELRS SE version is based on the ELRS version.

on the ELRS version! The built-in module is only 100mW

Other configurations remain the same as the ELRS version.)

Specification:

Size:160*128*68

Weight: 488g (without battery)

Working voltage: DC6V-DC8.4V

Firmware: OpenTX

Display: 1.3 inch LCD display, 128* 64 resolution

Gimbal Type: HALL Sensor

Upgrade method: USB online upgrade

Simulator mode: 3.5mm standard ppm output or USB

Battery: 2x18650 (Battery not included)

External Micro SD Card: reserved SD card slot

Package Included:

1*T-Pro Remote Controller

1*Zipper Case

JP4-in-1 multi-protocol, CC2500 version, ELRS version the difference between these three versions.

JP4-in-1 multi-protocol module version: The advantage is that there are many receiver types supported, such as: Tiandi Fei WFLY, Radiolink part, DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan, etc.

CC2500 version: The advantage is that it is cheaper and supports less receiver types, it can support: D8, D16, S-FHSS, Hitec, Radiolink, Esky.

ELRS version: This version is built-in ELRS HF head, only ELRS receiver can be used.

LCD screen Foldable antenna, Clear display and small easy packing and sense of granularity adjust as you wish screen control Removable 18650 25 battery: Easy change Hall sensor gimbals_ and swap_ Smooth and accurate Ultra-endurance power operation msopllet for your ELRS rocker battery Built-in USB-C balance of function and fun: charge: switch charge

Introducing Jumper T Pro's Internal 2.4GHz Module: One Radio to Rule Them All! This module supports multiple protocols, including CC2500, NFR2401, Frsky, Futaba SFHSS, Hisky, Syma, ASSAN eIC, and Hitec.

This product features an external nano interface, which supports ELRS, CRSF, and Tracer NANO modules. Please note that the module itself is not included with this purchase.

This is the first full-featured gamepad-style remote controller, featuring an ergonomic and compact design with excellent ergonomics.

This product features six-position push buttons, each individually connected to the microcontroller (MCU), ensuring high utility and flawless functionality.

The module comes with two standard 18650 batteries that have a combined maximum capacity of 3400mAh. It features a built-in USB-C charging port, as well as an independent button for seamless firmware updates, providing a more convenient and user-friendly experience.

Features a variable angle foldable antenna, a 5-way joystick for smooth control, and newly designed trim buttons providing high responsiveness and precision.

The Jumper T-Pro Internal RF module, also known as JPAINI, is a multi-protocol module that operates with a working voltage of DC 6V-8.4V. It supports OpenTX and EdgeTX firmware. The module features a 1.3-inch LCD screen with a resolution of 128x64 pixels and utilizes hall sensor gimbals for precise control.

The product is compatible with various drone brands, including Assan Bayang RX, BugsMini Cabell, Corona CX1O, Devo DSM, EOIX, Esky 150, FlySky AFHDSZA RX, Flyzone FQ777, FrskyD, Frskyl ZSX, Frskyx2, Frsky_ RX, FX816, FY326, GDOOX, GWO08, H8-30, Hisky, Hitec, Hontai HoTT, and Hubsan JGPro KF606.