MATEK F405-WING-V2 Flight Controller for Fixed-Wing Aircraft - STM32F405, ICM42688-P, OSD, 10 PWM

Overview

The MATEKSYS F405-WING-V2 is a flight controller for fixed-wing aircraft, integrating an STM32F405RGT6 MCU, ICM42688-P IMU, DPS310 barometer, and AT7456E OSD. It provides multiple UARTs, PWM outputs, I2C buses, onboard BECs, and a MicroSD slot for blackbox logging.

Key Features

• MCU: STM32F405RGT6 (168MHz, 1MB Flash)
• Sensors: ICM42688-P IMU, DPS310 barometer
• OSD: AT7456E
• Connectivity: 6 UARTs (plus 1x Softserial_Tx option in INAV), 2x I2C
• Outputs: 10x PWM
• Blackbox logging via MicroSD card slot
• USB Type-C (USB2.0)
• Built-in inverter for SBUS input

Customer service: https://rcdrone.top/ or support@rcdrone.top.

Video

VIDEO: Matek F405-Wing V2

Specifications

BEC outputs

• BEC 5V output: Designed for flight controller, receiver, OSD, camera, buzzer, 2812 LED strip, GPS module, AirSpeed; continuous current: 2 Amps
• BEC 9V / 12V output: Stable 9V/12V output (input voltage should be greater than output voltage + 1V); designed for video transmitter, camera, gimbal, etc; 12V option usage: with Jumper pad; continuous current: 2 Amps
• BEC Vx output: Stable Vx output (input voltage should be greater than Vx voltage + 1V); voltage adjustable: 5V default, 6V or 7.2V options; continuous current: 5 Amps, 6A peak
• BEC 3.3V output: Designed for external 3.3V peripherals; continuous current: 200mA; regulator: Linear

PDB (power distribution / sensing)

• Battery voltage divider 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
• Current sensor: 220A, 3.3V ADC (INAV scale 150, ArduPilot 66.7A/V)
• Input voltage range: 9-30V (36S LiPo) with TVS protection
• Sense resistor: 100A continuous, 220A peak

FC firmware targets

• ArduPilot: MatekF405-Wing (ArduPlane 4.4 or newer)
• INAV: MATEKF405SE (INAV 6.0 or newer)

What’s Included

• 1x MATEKSYS F405 Wing V2 Flight Controller
• 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port
• 3x Dupont 2.54 pins (board is shipped unsoldered)

Applications

• Fixed-wing aircraft builds using ArduPlane or INAV

Details

The MATEKSYS F405-WING-V2 flight controller combines a USB-C connection, onboard microSD BlackBox logging, and multiple UART and PWM pin headers for flexible wiring.

The MATEK F405-WING-V2 flight controller includes a USB-C port, microSD slot, and clearly labeled pads to simplify wiring and setup.

The MATEK F405-WING-V2 flight controller uses a compact stacked layout with a USB-C port and JST connector for cleaner wiring.

The MATEK F405-WING-V2 flight controller features a USB-C port, a DFU connector, and clearly labeled pin headers for straightforward wiring.

The MATEK F405-WING-V2 layout labels the key solder pads and connections, including UARTs, power rails, and camera/VTX pins.

The MATEK F405-WING V2 flight controller uses clearly labeled solder pads and a MicroSD slot to simplify wiring and setup.