BETAFPV P1 Air Unit HD VTX Digital FPV Video Transmitter Kit, 1080p@60fps, ~60ms, >5km, 5.1-5.9GHz
BETAFPV P1 Air Unit HD VTX Digital FPV Video Transmitter Kit, 1080p@60fps, ~60ms, >5km, 5.1-5.9GHz
BETAFPV
Couldn't load pickup availability
Overview
BETAFPV P1 Air Unit HD VTX is an HD VTX (FPV digital video transmitter) in the ArtLynk protocol ecosystem. It provides a 1080p@60fps live view with approximately 60ms latency and a video transmission range of over 5km, paired with a 1/2.9'' CMOS camera featuring a wide 170° field of view.
Key Features
- ArtLynk protocol for low-latency, long-range HD FPV video transmission.
- Live view quality: 1080p@60fps; video transmission latency: approx. 60ms.
- Video transmission range: >5km (range varies by environment and interference).
- VTX frequency: 5.1-5.9 GHz; max EIRP: <200mW (FCC/SRRC), <25mW (CE); 10MHz bandwidth; 3 channels; single antenna.
- Camera: 1/2.9'' CMOS sensor, 170° FOV, Canvas mode OSD, max video transmission bitrate 20Mbps.
- Ports/connectors: SH 1.0 6-pin (FC) and SH 1.0 4-pin (USB); labeled Bind Button, USB Port, Camera Port, LED, Antenna Port, FC Port.
- Artosyn Inside & KAP Supported (Artosyn AR803X chipset noted within the ArtLynk ecosystem).
- Standby Mode adjusts power based on the distance between the goggles and the drone to help keep the live view connected.
For product support and order assistance, contact support@rcdrone.top or visit https://rcdrone.top/.
Specifications
| Air Unit | |
| Weight | Air Unit (camera excluded): Approx. 3.61g Air Unit (camera included): Approx. 6.5g Antenna: Approx. 0.44g Note: weight does not include the antenna. |
| Mounting hole size | 25.5*25.5mm |
| Mounting hole diameter | ø2.5mm |
| Dimensions (L*W*H) | Air Unit: 30*30*5.5mm Camera: 14*14*17mm |
| Ports | SH 1.0 6-pin (FC) SH 1.0 4-pin (USB) |
| VTX | |
| Frequency | 5.1-5.9 GHz |
| Effective Isotropic Radiated Power (EIRP) | <200mW (FCC/SRRC) <25mW (CE) |
| Video transmission range | >5km |
| Video transmission latency | Approx. 60ms |
| Live view quality | 1080p@60fps |
| Bandwidth | 10MHz |
| Antenna | Single antenna Antenna dimensions (as labeled): 50mm, 24mm |
| Channels | 3 |
| Camera | |
| Mounting width | 14mm |
| Mounting hole | M2 |
| Image sensor | 1/2.9'' CMOS |
| Lens | Field of View (FOV): 170° |
| Video format | MP4 |
| Max video transmission bitrate | 20Mbps |
| OSD | Canvas mode |
| Power / Firmware | |
| Input voltage | 5V |
| Operating temperature | -10°C to 40°C |
| Compatibility | |
| Supported FC | Betaflight FC & BETAFPV FC |
Wiring / Pinout (FC & USB)
- 1: POWER IN
- 2: POWER GND
- 3: UART RX (Connecting FC TX)
- 4: UART TX (Connecting FC RX)
- 5: GND
- 6: N/A
- 7: USB-VBUS
- 8: USB-DP
- 9: USB-DN
- 10: USB-GND
Firmware Compatibility Notes
- For compatibility with third-party ArtLynk protocol equipment (example: HGLRC Draco), update BETAFPV devices to firmware version V2.0.5 or later.
- The air unit is updated via the ground station. Ensure the ground station and air unit are on the same firmware version before updating. Firmware V2.0.5 is not compatible with V1 versions (V1.0.36 / V1.0.44).
| Ground Station | Air Unit | Actions Required |
| V1 | V1 | Update both to V2 |
| V1 | V2 | Update ground station to V2 |
| V2 | V1 | Downgrade ground station to V1, then update both to V2 |
| V2 | V2 | Ready to use |
What’s Included
- 1 * P1 Air Unit HD VTX
- 1 * 6Pin Cable
- 1 * Accessories Package (4*Shock-absorbing Balls, 2*M2-4 Screws, 4*M2-6 Screws)
- 1 * User Manual
Manuals / Firmware
Video
Details
Get an HD digital FPV live view up to 1080p at 60fps with low-latency performance for a responsive flight feel.
Clear port labeling makes wiring straightforward, with dedicated connections for camera, flight controller, USB, and antenna.
Compact 30×30mm mounting and a 14mm-wide camera fit common FPV frames while keeping the overall stack low-profile.
Keeping weight low helps preserve flight time and handling, especially on smaller builds.
Designed for common FPV firmware workflows, with a 6-pin serial connection for clean integration on supported flight controllers.
Built for the ArtLynk ecosystem to deliver stable HD video links across compatible FPV gear.
Use the pinout to connect power, UART control, and USB for setup and firmware updates.
Details
BETAFPV P1 Air Unit HD VTX wiring diagram labels power in/ground, UART RX/TX, and USB pins (VBUS, DP, DN, GND) for easy connection.
The BETAFPV P1 Air Unit HD VTX package includes the camera module, VTX board with antenna, wiring harness, mounting screws, and manual for installation.
Related Collections
