Propeller Guard Protector for DJI Mavic 3 Drone - Propeller Guard Props Wing Fan Cover Ladning Gear for Mavic 3 Drone Accessories

no landing gear set Feature:

1. Made of high-quality materials with good toughness,
2. Protect the propeller to prevent the propeller from scratching people or objects, and also prevent foreign objects from hitting the propeller and affecting flight safety,
3. Easy to install and durable.

Description:
Material: PC+ABS,
Applicable models: for Mavic 3/3 Classic
Color: Gray,
Net weight: 115g,
Product size: 18*25*4.5cm,

Packing list:
1set Propeller cover

Note:
1.Does not include Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Specifications Product name Propeller Guards for mavic 3 drone Appearance Color: grey parameters Main material: PC+ABS Net weight: 115g Grossweight: 129g Product size: 18*25*4.5cm (single) Packing size: 25*19*9cm

Isolated propeller Make flying safer and more assured Isolate the propeller from the outside to prevent accidentally injuring people and cutting objects .

propeller isolation has a margin of about Zmm to prevent the propeller from being scratched, broken and damage to the machine due to hitting the anti-collision 7mm ring:

Using high-toughness materials, it has strong impact resistance and compression resistance, reducing accidental damage to the machine .

the snap cover is marked with LF/RF/LR/RR; LR . the cover is shown in the figure, install protective cover on the corresponding arm and fasten the buckle .

Feature:

1. Isolate the blades to prevent the blades from hurting people or being damaged by foreign objects, and improve flight safety,
2. High-toughness materials are used, which are resistant to collision and compression, which can effectively prevent the blades from hurting people or damaging the blades,
3. Combined with the increased landing gear design, the drone can be effectively increased by 2cm to protect the fuselage and gimbal from damage,
4. Lightweight design, easy to install and remove.

Note: When flying, the APP may prompt to detect the protection ring, please pay attention to safe flight!

Description:
Material: ABS+PC
Applicable models: for Mavic 3/3 Classic
color: Dark grey
Net weight: 125g
Product size:18*25.5*6.7cm (rear protection ring), 18*25.6*5.8cm (front protection ring)
Packing list:
4set Blade Protection Ring

Note:
1.Does not include Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

For Mavic 3 drones Integrated Landing Gear Protection Ring Effectively increase the height of the drone by Zc

Integrated Landing Gear Protection Ring for Mavic 3 Applicable models: mavic 3 Main material: ABS+PC Net weight: 125g Package weight: 245g

Ensure flight safety Applicable scenarios_ outdoors; in scenes with many obstacles, indoor close-range low altitude flight, etc.

improving flight safety Isolate the propeller from the outside to prevent the blades from hurting people or being damaged by foreign objects .

2cm Combined with elevated landing gear design Effectively increase the height of the drone by Zcm, and effectively protect the fuselage gimbal when landing on uneven ground .

foldable landing gear Combined with the heightened landing gear design to improve flight safety Rear protection Front protection ring

left front "RF" right front LF RF LR RR "LR" left rear "RR" right back . buckle tightly: protection ring, and then install it .

APP may prompt that a protective ring is detected when flying . if detected, the APP will alert you to the presence of a ring .