Propeller Holder for DJI Mini 3/3 Pro SPECIFICATIONS
Weight: Net weight:0.55oz.(15.8g)
Size: 3.5*3.07*2.4in(8.9*7.8*6.1cm)
Propeller Fixed Stabilizer: Propeller Fixed Stabilizer
Package: Yes
Origin: Mainland China
Compatible Drone Model: for DJI Mini 3/3 Pro
Compatible Drone Brand: DJI
Brand Name: BRDRC
Feature:
1. the real machine is moulded to effectively fix the front and rear propellers, protecting the propellers in the folded and stored state and preventing damage to them when they are stored in the backpack.
2. will not crush and damage the propeller, while at the same time serving to hold the propeller in place during storage, making it less likely to wobble or cross.
3. reasonably fixed propellers, fitting the fuselage, while not affecting the use of the lens cover installed.
4. half wrap is the chassis design, the base can wrap the bottom motor of the drone when storing, to prevent debris from entering the motor.
5. two holes to adjust the tightness of the propeller, easy to install and remove.
Description:
Material: Silicone + ABS
Applicable models: for Mini 3, Mini 3 Pro
Color: Gray, orange
Net weight:0.55oz.(15.8g)
Product size:3.5*3.07*2.4in(8.9*7.8*6.1cm)
Packing list:
1pcs Propeller Holder
BRDRC Propeller Holder For Mini 3 Effectively fixed and protective propellers, convenient storage :::
real machine opens the mold and integrates the fuselage design to effectively fix the front and rear propellers . elrldgs propeller propeller is prone to shaking, is fixed, effectively avoiding problems crossing and folding .
Comparison chart Our Other Wrap the bottom motor Cover the top paddle tip Adjustable elasticity Used on both models :76
bottom is located near the lens cap, which does not press against the paddle tip . bottom does not affect the installation and removal of lens cap .
the base can wrap the motor on the bottom of the drone . this prevents debris from entering the motor without affecting the lens cap installation . "uiahT2499" is a semi-w
the top propeller belt is made of soft silicone material, and the beam paddle has two holes for adjustable elasticity, so it will not squeeze the propeller during installation .
Proper storage of propellers , can prevent damage to the propeller when storing, can be into the storage bag without disassembly .
strap is made of silicone material, which is soft and not easy to deform . strap can cover the tip of the paddle and effectively protect the blade from damage .
Specifications Orange Grey Product name Propeller Holder For Mini 3 Applicable models Mini 3, Mini 3 Pro Appearance Main material: Silicone + ABS parameters Net weight:0.5502(15.8g) Package weight:0.9602.(27.5g)
Note:
1.Does not include the Drones, storage bags and other accessories,
2.Transition: 1cm=10mm=0.39inch,
3.Since the size and weight are manually measured, due to different measurement methods, there may be certain errors in the weight and size of the product, but the error does not affect the normal use of the product, please confirm that you know and accept the error before purchasing;
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!