SpeedyBee Flex25 - HD 78mm F7 35A AIO 4S 2.5 Inch CineWhoop RC FPV Racing Drone BNF with Runcam Falcon 120fps Digital Camera Toys

SpeedyBee Flex25 HD 78mm F7 35A AIO 4S 2.5 Inch CineWhoop RC FPV Racing Drone BNF with Runcam Falcon 120fps Digital Camera Toys

Specification: 

Brand: SpeedyBee

Model: Flex25 (HD)

Item Name: 78mm Wheelbase F7 4S 2.5 Inch FPV Racing Drone

Wheelbase: 78mm

Dimension: 136x136x35mm ( LxWxH)

Weight: 155g ( without Battery)

Package Included:

1x SpeedyBee Flex25 HD FPV Drone

1x Extra Gemfan D63-3 Propeller Set ( 2L+2R)

1x set of connection cables

1x set of Screws and Nuts

Introducing the SpeedyBee Flex25, the world's smallest 2.5-inch CineWhoop drone, featuring a 28% smaller wheelbase compared to other 2.5-inch cinewhoops. This innovative drone comes equipped with a 120fps RunCam Link Falcon Nano Kit digital FPV system, built-in F745 35A Bluetooth and WiFi AIO module for seamless connectivity. Additionally, it boasts the world's first plug-and-play compatibility with GoPro/Insta360 Go cameras and RunCam Thumb cameras, all within a tough and rugged unibody design.

The Cinewhoop's wheelbase is inherently limited by its prop size. To mitigate this constraint, we've strategically placed the motors at different levels to significantly reduce the overall length. With a wheelbase of just 78mm, you can easily accommodate lightweight action cameras.

Purchase this quadcopter with the advanced RunCam Link Falcon Nano kit digital FPV system, which allows for wireless control of brightness, saturation, and other settings on your DJI FPV goggles at any time.

The SpeedyBee Flex25 is powered by an F745 35A All-In-One (AIO) wireless flight controller, which features a high-end STM32F745 microcontroller unit (MCU) and a powerful 35-amp Bluejay electronic speed controller (ESC).

The AUX 4 port is designed for controlling and monitoring your connected action camera, allowing you to start recording remotely via the provided cable and your transmitter.

The Unibody Protective Duct, crafted from durable car bumper material, provides comprehensive impact protection for your quadcopter. Reinforced with M2.5 hex standoffs and screws, this design ensures that your 2.5-inch CineWhoop is one of the toughest in your fleet.

Upon powering on your SpeedyBee drone for the first time, please follow the in-app instructions within the SpeedyBee app. Complete the setup process and initiate the sending function once you have finished.

Connect the drone to your computer via the USB port and use the Betaflight/BLHeli-S Configurator software to configure settings. Additionally, ensure you power the quad with a suitable battery before taking flight, as the AIO flight controller will not function without power.

The 6-pin connector on the quadcopter's end has the following pin definitions: Pin 1-3 are E2, Pin 4 is 8%, Pin 5 is BAT, Pin 6 is SV, and Pin 7 is GND. Additionally, there are two power cables: one 6-pin, 30mm cable for HD cameras and another 6-pin, 60mm cable for RunCam thumb control. A third cable is dedicated to the Naked GoPro 8/7 AUX 4 pin, which sets the start-up mode.