GEPRC GEP-DS16 FPV Frame Kit, 1.6in Ducted Whoop, DJI O4 Air Unit Pro Mount, XT30, 91mm Wheelbase

Overview

The GEPRC GEP-DS16 is an FPV Frame designed to support the DJI O4 Air Unit Pro VTX. The integrated top cover uses a four-point damping ball system to filter vibrations, change resonance frequency, and reduce the jello effect for stable and clear aerial cinematography. A quick-release structure allows the AIO and VTX module to be detached by removing only 6 screws, simplifying inspection and maintenance. The compact 1.6-inch format is built for agile flight through narrow spaces, and a fixed XT30 connector provides clean, convenient power connection.

Key Features

• Integrated canopy with four-point damping ball system for vibration isolation and reduced jello effect
• Quick-release layout: AIO + VTX module removable with 6 screws
• Designed for DJI O4 Air Unit Pro VTX; listed with larger CMOS for clearer, sharper imaging
• Injection-molded frame design: light & strong
• Ducted prop guard design: safe & protective
• Camera protector: impact resistant
• Fixed XT30 connector: plug & play
• Bottom battery bay: quick swap

For build compatibility questions (AIO/VTX stack, mounting hardware, or spare parts), contact support@rcdrone.top or visit https://rcdrone.top/.

Specifications

What’s Included

• Main Carbon Plate (Black) x 1
• Propeller Guard (Black) x 2
• Canopy (Orange) x 1
• Camera Protector (Orange) x 1
• Canopy (Gray) x 1
• Camera Protector (Gray) x 1
• Damping Balls x 6
• Damping Ball Punch Tool x 1
• XT30 Mounting Base x 1
• XT30G Male Connector x 1
• Receiver Mount x 2
• Battery Mount x 2
• Battery Anti-slip Pad x 2
• Knurled Aluminum Standoff x 4
• Plastic Tweezers x 1
• Stainless Steel SIM Card Pin x 1
• Propeller Removal Tool (V-Type) x 2
• L-Shaped Hex Wrench 1.5mm x 1
• Mini Hex Screwdriver (M2) x 2
• Torx Screwdriver x 1
• Keychain x 1
• Screw Pack x 1
• VTX Antennas x 2
• IPEX Connector Copper Tube Antenna x 4

Screws Included

• Round Head Torx Screw M1.4*4 x 18
• M2 Hex Nut x 6
• M2 Nylon Hex Nut x 6
• Pan Head Hex Screw M2*5 x 4
• Pan Head Hex Screw M2*3.5 x 4
• Round Head Hex Screw M2*6 x 10
• Flat Hex Screw M2*6 x 8
• Flat Hex Screw M2*12 x 2
• Flat Hex Screw M2*14 x 4

Applications

• Compact 1.6-inch ducted FPV builds
• Indoor and tight-space flight paths
• FPV filming where vibration isolation and stable footage are required

Details

The GEPRC GEP-DS16 frame uses a compact, ducted micro-quad layout for tidy component placement and prop protection.

The GEPRC GEP-DS16 frame features ducted prop guards, a camera protector, a fixed XT30 connector, and a bottom battery bay for quick swaps.

The GEPRC GEP-DS16 FPV frame uses an integrated canopy with a four-point damping ball mount to help isolate the camera and reduce vibrations.

The GEPRC GEP-DS16 frame supports 25.5 x 25.5mm (M2) mounting for both the AIO flight controller and VTX.

The GEP-DS16 FPV frame uses 2.5mm carbon plates with a 91mm wheelbase and 25.5×25.5mm FC/VTX mounting.

The GEPRC GEP-DS16 FPV frame measures about 125mm by 100mm with an overall height around 58mm for sizing your build and components.

The GEP-DS16 frame uses a prop guard, carbon fiber plate, XT30 fixtures, and a bolt-on battery mount for a tidy build layout.

The GEP-DS16 frame assembly uses an orange canopy and camera protector secured with M2 screws and 60° damping balls.

The GEP-DS16 frame combines an orange canopy-style top plate with four ducted prop guards for a compact FPV build.

The GEPRC GEP-DS16 frame pairs an orange top plate with four ducted guards and a carbon fiber base for a compact build.

The GEPRC GEP-DS16 FPV frame features an orange top plate with four integrated circular duct guards around a carbon-fiber chassis.

The GEP-DS16 frame kit includes carbon fiber plates, four duct guards, printed mounts, and a full set of screws and small tools for assembly.

The GEP-DS16 frame kit includes a main carbon plate, propeller guards, orange and gray canopies with camera protectors, damping balls, and XT30/receiver/battery mounts.

The GEPRC GEP-DS16 FPV frame kit includes four IPEX copper tube antennas, XT30G male connector, standoffs, and handy tools like a 1.5mm hex wrench and prop removal tools.

The included hardware kit lists M1.4×4 Torx screws, multiple M2 hex and nylon nuts, and assorted M2 screws in several lengths.