GEPRC GEP-CL35 V3 FPV Frame Kit (Cinelog35) for O4 Air Unit Pro, 142mm Wheelbase, 3.5 inch

Overview

The GEPRC GEP-CL35 V3 FPV frame kit is an upgraded Cinelog35 Series frame designed to support the O4 Air Unit Pro HD digital transmission system. The V3 frame is re-molded to fit the O4 Pro module, providing easier Type-C access for data transfer and quick memory card insertion/removal. Tuned damping balls are used to improve vibration isolation and help minimize camera jello for clearer footage.

Key Features

• Compatible with the O4 Air Unit Pro HD digital transmission system.
• Bottom-mounted camera design connected via tuned damping balls for effective vibration isolation.
• Updated molds for the O4 Air Unit Pro module for easier Type-C access and quick memory card insertion/removal.
• GPS mount compatible with 22mm x 22mm x 8.2mm GPS units.
• Main carbon plate finished with a matte black coating.
• O4 Pro camera mount: optimized damping for enhanced stability.
• Prop guard optimization: upgraded O4 Air Unit Pro port for easier data access.

Specifications

Note: Dimensions and weight are for reference only. Please refer to the actual product.

For pre-sales compatibility questions (O4 Air Unit Pro mounting, GPS size, stack mounting), contact support@rcdrone.top or visit https://rcdrone.top/.

What's Included

• Main Carbon Plate x 1
• Gimbal Carbon Plate x 1
• Bottom Carbon Plate x 1
• Prop Guard x 1 (pair)
• Camera Mount x 1
• Receiver Mount x 1
• T-Antenna Mount x 1
• Capacitor Mount x 1
• Power Connector Mount x 1
• VTX Antenna Mount x 1
• GPS Mount x 1
• Action Camera Base Mount x 1
• 40mm UFL Antenna Extension Cables x 4
• Battery Anti-Slip Pads x 2 (sets)
• Battery Strap Aluminum Mounts x 2
• XT60EW-M Plug x 1
• 20x220mm Battery Strap x 1
• 20x250mm Battery Strap x 1

Small Accessories

• M2*3.3*25 Textured Aluminum Standoffs x 4
• Motor Wire Management Tubes x 4
• Small Action Camera Base x 1
• Camera Damping Balls x 6
• Gimbal Damping Balls x 4
• Damping Ball Installation Tool x 1
• 3.0mm L-Shaped Hex Wrench x 1
• 2.0mm L-Shaped Hex Wrench x 1
• 1.0mm L-Shaped Hex Wrench x 1
• M8 Wrench x 1
• Keychain x 1

Screw Pack

• M2*7 Pan Head Screws x 20
• M2*8 Pan Head Screws x 16
• M2*6 Pan Head Screws x 6
• M2*5 Pan Head Screws x 4
• M2.5*6 Pan Head Screws x 4
• M2 Hex Nuts x 10
• M3 Press-Fit Nuts x 4
• M2 Press-Fit Nuts x 12

Applications

• Cinelog35 Series builds requiring an upgraded frame to support the O4 Air Unit Pro module
• 3.5-inch ducted FPV builds (95mm duct inner diameter)
• Builds using 25.5mm x 25.5mm FC mounting and 20mm x 20mm / 25.5mm x 25.5mm VTX mounting patterns

Details

The GEPRC GEP-CL35 V3 frame uses a ducted, cinewhoop-style layout with a compact top plate and front camera mount for a tidy build.

The GEP-CL35 V3 frame uses a 142mm wheelbase with 25.5×25.5mm FC mounting and support for 3.5-inch props.

The GEP-CL35 V3 frame is listed as compatible with the O4 Air Unit Pro, with Type‑C access, a bottom-mounted camera design, and a GPS mount.

The GEPRC GEP-CL35 V3 frame includes an O4 Pro camera mount with a damped mounting layout for a steadier camera setup.

The GEP-CL35 V3 frame features an optimized prop guard design and an upgraded O4 Air Unit Pro port for easier data access.

The GEPRC GEP-CL35 V3 frame measures 203.5 mm by 203.5 mm and uses a ducted guard layout for compact builds.

The GEPRC GEP-CL35 V3 frame uses a ducted cinewhoop-style layout with integrated prop guards for a compact build.

The GEPRC GEP-CL35 V3 frame uses a ducted 4-prop layout with a central mounting plate and a front camera mount for a tidy build.

The GEPRC GEP-CL35 V3 frame features a cinewhoop-style layout with integrated prop guards and a top-mounted camera bracket.

The GEP-CL35 V3 frame kit includes duct guards, carbon frame plates, battery straps, wiring pigtails, and a full set of mounting hardware.