GEPRC Cinebot25 V2 O4 Pro FPV Drone Quadcopter with DJI O4 Air Unit Pro, TAKER F722 35A AIO

Review Videos

Overview

GEPRC Cinebot25 V2 O4 Pro is an FPV drone quadcopter featuring a shock-absorbing, quick-release modular camera/VTX design. The DJI O4 Air Unit Pro is housed inside a suspended vibration-damping module to help deliver smoother footage and allow fast module swapping, supporting a “one core, multiple applications” concept across 2.5-inch and future multi-platform frames.

Key Features

• DJI O4 Air Unit Pro digital transmission system (VTX, camera module, and antenna)
• Vibration-damped, quick-release modular VTX design; remove four screws to detach the complete VTX module for independent installation and flexible adaptation to different frames and flying styles
• Six-point vibration damping system to reduce jello and vibration for smoother cinematic footage
• Quick-release frame design for easier maintenance (one-step disassembly)
• High-coverage electronics bay with a dedicated function board integrating buzzer, LED strip BEC, and a USB tuning port
• Precision-designed canopy for DJI O4 Air Unit Pro camera lens protection
• TAKER F722 35A 32Bit AIO (labeled 2-6S) and 35A 32-bit ESC
• SPEEDX2 1404 4600KV motors
• CNC aluminum alloy front structure
• Integrated prop guard made from high-strength injection-molded material for impact protection and improved overall flight safety
• O4 Pro HD VTX supports 4K 120fps recording
• GPS support for outdoor flying; note: GPS included on all versions

For pre-sales questions, setup guidance, or after-sales support, contact support@rcdrone.top or visit https://rcdrone.top/.

Specifications

Also shown (separate variant)

• Model: Cinebot25 V2 WTFPV
• Weight: 183 ± 5 g

What’s Included

• 1 x Cinebot25 V2 quadcopter
• 2 x HQprop DT63mmx3 V2 (pairs)
• 1 x 15*150 mm battery strap
• 1 x L-shape hex wrench 1.5 mm
• 1 x spare screw pack
• 1 x battery anti-slip pad
• 1 x binding pin
• 4 x rear landing pads (injection-molded)
• 2 x front bottom landing pads (injection-molded)
• 1 x front top cover
• 2 x O4 antenna mounts (injection-molded)
• 2 x acrylic plates
• 3 x damping balls

Spare screws include

• 2 x press-fit nuts
• 4 x M2*4 button head hex screws
• 3 x M2*10 button head hex screws
• 4 x M2*7 button head hex screws
• 3 x M2*6 button head hex screws
• 2 x M2*10 socket head hex screws

Additional parts included in certain versions

• 1 x receiver female connector cable (O4 Pro PNP)

Applications

• Cinematic FPV cruising and stabilized-looking footage (via vibration damping)
• HD FPV flying with DJI O4 Air Unit Pro digital transmission
• Outdoor flying with GPS support (flight-controller features depend on configuration)

Details

The GEPRC Cinebot25 V2 cinewhoop features a compact ducted frame with a front-mounted FPV camera, top battery strap, and rear antenna mount.

The GEPRC Cinebot25 V2 cinewhoop features a front-mounted FPV camera and ducted prop guards in a compact, stable platform.

The GEPRC Cinebot25 V2 features a ducted cinewhoop frame with protected propellers and a forward-mounted camera for controlled close-range flying.

The GEPRC Cinebot25 V2 cinewhoop features ducted prop guards, a front-mounted camera, and a top battery strap for a compact, protected setup.

GEPRC Cinebot25 V2 uses a ducted cinewhoop frame with a front camera mount and dual antennas for a compact FPV setup.

The Cinebot25 V2 O4 Pro pairs an O4 Pro HD VTX with 1404 4600KV motors, a TAKER F722 35A 2–6S AIO, and a quick-release VTX module.

The modular VTX and camera assembly detaches with four screws for easier installs and frame swaps.

The Cinebot25 V2 quick-release frame design allows one-step disassembly for faster, easier maintenance.

The six-point vibration damping camera mount is designed to reduce vibrations for smoother, clearer cinematic footage.

The Cinebot25 V2 uses an integrated prop-guard duct design to help protect the props and improve safety during close-range flights.

The Cinebot25 V2’s TAKER F722 flight controller paired with a 35A ESC provides a compact core with USB-C access and clearly labeled pads for wiring.

The Cinebot25 V2 includes a GPS module on all versions to support stable outdoor positioning and return-to-home setup.

Cinebot25 V2 O4 Pro uses a 123mm wheelbase frame with an XT30 battery connector and a listed weight of 219±5g.

The Cinebot25 V2 ducted frame, forward camera mount, and top battery strap keep a 2.5-inch cinewhoop build compact and protected.

The GEPRC Cinebot25 V2 features a ducted cinewhoop frame with a front camera mount and dual antennas for a clean, protected setup.

GEPRC Cinebot25 V2 features a compact ducted cinewhoop frame with four tri-blade propellers and a top-mounted battery strap for a secure fit.

The GEPRC Cinebot25 V2 O4 Pro package includes the quad along with spare props, hardware, and mounting accessories for setup and repairs.

The Cinebot25 V2 kit includes the drone, front top cover, O4 antenna mounts, landing pads, HQProp DT63mm×3 V2 props, battery strap, hex wrench, screws, anti-slip pads, and binding pin.

The Cinebot25 V2 spare screw pack includes damping balls, press-fit nuts, and assorted M2 button-head and socket-head screws in multiple lengths.