GEPRC Cinebot25 V2 WTFPV FPV Drone Quadcopter, 123mm Wheelbase, TAKER F722 35A 32Bit AIO, GPS

Overview

GEPRC Cinebot25 V2 WTFPV is a compact FPV drone quadcopter built around a modular quick-release VTX/camera module concept and a vibration-damping suspended mount design for smoother footage when using compatible HD modules.

The platform features an optimized frame with an integrated prop guard, CNC aluminum alloy front structure, and a high-coverage electronics bay. A dedicated function board integrates a buzzer, LED strip BEC, and a USB tuning port.

Key Features

• Modular system design: remove four screws to detach the complete VTX module for flexible adaptation to different frames and flying styles
• Quick-release frame design for easier maintenance (one-step disassembly)
• Six-point vibration damping system designed to reduce jello and vibration for smoother cinematic footage
• Integrated prop guard made from high-strength injection-molded material for impact protection
• TAKER F722 35A 32Bit 2-6S AIO flight system
• GPS support for outdoor flying; note: GPS included on all versions
• O4 Pro HD VTX module (when installed on applicable versions) supports 4K 120fps recording

Specifications

For purchasing help, compatibility questions, or version confirmation, contact support@rcdrone.top or visit https://rcdrone.top/.

What's Included

• Cinebot25 V2 Drone x 1
• Front Top Cover x 1
• O4 Antenna Mounts (Pair) x 1
• Front Landing Pads x 2
• Rear Landing Pads x 4
• HQProp DT63mmx3 V2 (Pair) x 2
• 15*150mm Battery Strap x 1
• L-Shaped Hex Wrench 1.5 mm x 1
• Spare Screw Pack x 1
• Battery Anti-Slip Pad x 2
• Binding Pin x 1
• Receiver Female Connector Cable (PNP) x 1 (included in certain versions)

Spare Screw Pack Includes

• Damping Balls x 3
• Press-Fit Nuts x 2
• M2*4 Button Head Hex Screws x 4
• M2*10 Button Head Hex Screws x 3
• M2*7 Button Head Hex Screws x 4
• M2*6 Button Head Hex Screws x 3
• M2*10 Socket Head Cap Screws x 2

Details

The GEPRC Cinebot25 V2 features a compact cinewhoop frame with ducted prop guards, a front camera mount, and dual antennas.

GEPRC Cinebot25 V2 combines an O4 Pro HD VTX, TAKER F722 35A 2–6S AIO, 1404 4600KV motors, and a quick-release VTX module.

A four-screw modular VTX assembly makes it easier to detach the electronics module for installation, swaps, and maintenance.

The GEPRC Cinebot25 V2 uses a quick-release frame design that makes disassembly and maintenance faster with just a few screws.

The Cinebot25 V2 uses a six-point vibration damping setup under the camera platform to help reduce jello and vibration in footage.

The Cinebot25 V2 cinewhoop frame uses integrated prop guards made from high-strength injection-molded material for added impact protection.

The Cinebot25 V2 uses a TAKER F722 flight controller paired with a 35A 32-bit ESC for a compact, tidy wiring layout.

The Cinebot25 V2 includes a GPS antenna module for more stable positioning support during outdoor flying.

Cinebot25 V2 WTFPV uses a TAKER F722 35A 32-bit AIO with XT30 power and supports ELRS 2.4G, 4S 750–1100mAh packs, and a listed weight of 183±5g.

The Cinebot25 V2 features a ducted cinewhoop frame with a protected front camera mount, top battery strap, and rear antenna setup.

The GEPRC Cinebot25 V2 uses a compact ducted frame with a top-mounted camera cage and rear antennas for a tidy cinewhoop setup.

The GEPRC Cinebot25 V2 cinewhoop frame uses four ducted prop guards and a center battery strap for a compact, protected build.

The GEPRC Cinebot25 V2 kit includes the ducted quad, spare tri-blade props, mounting brackets, screws, and a battery strap for setup and repairs.

The Cinebot25 V2 kit includes the drone plus accessories like O4 antenna mounts, landing pads, two pairs of HQProp DT63mm×3 V2 props, a 15×150mm battery strap, a 1.5mm hex wrench, and a spare screw pack.

The GEPRC Cinebot25 V2 spare screw pack includes damping balls, press-fit nuts, and assorted M2 button-head and socket-head screws in multiple lengths.