GEPRC MATEN 3.3G 5W VTX PRO FPV Video Transmitter, 3083-3495MHz, 25-5000mW, IRC Tramp

Overview

GEPRC MATEN 3.3G 5W VTX PRO is an FPV video transmitter (VTX) with four adjustable output power levels up to 5000mW. It operates on 3083-3495MHz, supports 48 channels, and supports direct frequency input by configurator for stable signal transmission.

The unit uses a high-strength CNC aluminum alloy housing for heat dissipation and impact resistance, and includes a built-in micro turbine fan for active cooling. It supports the IRC Tramp protocol for OSD configuration, includes thermal protection, and accepts a wide DC7-36V (2-8S battery) input.

Key Features

• Four adjustable power levels up to 5W (25mW/200mW/1600mW/5000mW) plus Pit mode
• Frequency range: 3083-3495MHz; 48CH; direct frequency input supported
• CNC aluminum alloy housing + built-in micro turbine fan for active cooling
• Wide input voltage: DC7-36V (2-8S Battery)
• One function button + three indicator LEDs for operation
• IRC Tramp protocol, supports OSD configuration
• Thermal protection (automatic power reduction when overheated)
• 20x20mm (M2) mounting pattern

Specifications

Frequency Bands (48CH)

A: 3083, 3114, 3145, 3176, 3207, 3238, 3269, 3300
B: 3215, 3235, 3255, 3275, 3295, 3315, 3335, 3355
C: 3170, 3190, 3210, 3230, 3250, 3270, 3290, 3310
D: 3320, 3345, 3370, 3395, 3420, 3445, 3470, 3495
E: 3310, 3330, 3355, 3380, 3405, 3430, 3455, 3480
F: 3330, 3350, 3370, 3390, 3410, 3430, 3450, 3470

Button & LED Operation

• Switch (function button)
• Channel light: blue
• Band light: green
• Power light: red

Step 1: Select Channel (blue light)

Press and hold the button for 2 seconds. When the blue light flashes, it enters frequency adjustment mode. Click quickly to switch frequency points:

Step 2: Select Band (green light)

After switching frequency points, press and hold the button for 2 seconds again within five seconds. When the green light flashes, it enters band adjustment mode. Click quickly to switch band:

Step 3: Select Power (red light)

After switching band, press and hold the button for 2 seconds again within five seconds. When the red light flashes, it enters power adjustment mode. Click quickly to adjust power:

Notes

1. Install the antenna before powering on (label: “Install Antenna Before Use”).
2. Thermal protection automatically reduces output power if overheated. Ensure good airflow and cooling during use. If airflow is limited, consider adding an additional cooling fan.
3. The 5V output is for the camera only. Do NOT connect the main power input to the 5V output port, or the VTX will be damaged.

Wiring / Pads (label)

• 7-36V
• GND
• VTX
• IRC
• 5VOUT
• GND
• ANT (SMA)

What’s Included

• 1 x MATEN 3.3G 5W VTX PRO VTX
• 1 x VTX cable (SH1.0 6pin 150mm)
• 1 x User manual

For order support and technical questions, contact support@rcdrone.top or visit https://rcdrone.top/.

Details

The GEPRC MATEN 3.3G 5W VTX Pro uses a fan-cooled heatsink design with an SMA antenna connector for straightforward FPV video setup.

GEPRC MATEN 3.3G 5W VTX Pro supports 3083–3495MHz with 48 channels, DC7–36V input, and an SMA antenna connector.

The GEPRC MATEN 3.3G 5W VTX lists adjustable output power up to 5W, 7–36V input, IRC Tramp support, and 20×20mm (M2) mounting.

The GEPRC MATEN 3.3G VTX measures 53.5 x 29 x 17.2 mm and includes on-body controls for power, band, and channel.

The MATEN 3.3G 5W VTX uses a 20×20 mm (M2) mounting pattern and a side SMA antenna connector for straightforward installation.

The MATEN 3.3G VTX uses a single button and color LED flashes to set channel, band, and power levels from 25mW up to 5000mW, plus PIT mode.

Band and channel frequencies from 3083–3495 MHz help you match the MATEN 3.3G VTX to your receiver or goggles.

GEPRC MATEN 3.3G 5W VTX features an SMA antenna connector and clearly labeled pads for 7–32V input, video, VTX, IRC, 5V out, and GND.

The GEPRC MATEN 3.3G 5W VTX includes the MATEN 3.3G VTX Pro unit and a 150mm SH1.0 6-pin wiring cable for installation.