BrotherHobby SE 2807 1300KV CW Brushless Motor for 6S, 12N14P, M5 Thread, 48g, 19x19mm Mount
BrotherHobby SE 2807 1300KV CW Brushless Motor for 6S, 12N14P, M5 Thread, 48g, 19x19mm Mount
BrotherHobby
Couldn't load pickup availability
Overview
BrotherHobby SE 2807 1300KV Motor (CW) is a brushless motor designed for 6S setups, featuring a 12N14P configuration, 7075 aluminum casing/bell, and an M5 prop adapter shaft thread. Bench test data is provided for an HQ 7.0x3.5x3 propeller.
Key Features
- KV rating: 1300KV
- Configuration: 12N14P
- Base casing / bell cap: Al 7075
- Shaft material: SUS420 (heat-treated steel shaft noted)
- Stator: 0.2mm Kawasaki silicon steel
- Rotor / magnet: N52H (arc magnets noted)
- Bearings: Japanese NMB 12 x 6 x 4
- Mounting: M3 (19 x 19mm), 4 x M3
- Wire: 18# (20cm / 200mm length)
For compatibility questions (props, ESC sizing, mounting), contact support@rcdrone.top or visit https://rcdrone.top/.
Specifications
| Model | SE 2807 |
| KV | 1300KV |
| Rotation | CW |
| No. of Cells (LiPo) | 6S |
| Configuration | 12N14P |
| Base casing | Al 7075 |
| Bell cap | Al 7075 |
| Stator material | 0.2mm Kawasaki silicon steel |
| Stator dimension | 28.00 mm |
| Stator height | 7 mm |
| Motor dimension | φ33.2 - 33.35 mm |
| Bolt pattern | M3 (19 x 19mm) |
| Prop adapter shaft thread | M5 |
| Shaft | SUS420 |
| Bearings | Japanese NMB 12 x 6 x 4 |
| Rotor / magnet | N52H (arc magnets) |
| Wire AWG | 18# 20cm length (18# 200mm length) |
| Weight | 48g |
| Weight including cable | 48.00 g |
| Internal resistance | 80.00 mΩ |
| Idle current @ 10V | 1.02A / 10V |
| Max power | 1000.14 W |
| Max current | 42.20 A |
| Dynamic balance requirement standards | ≤ 3mg |
| Propeller (test) | 7 inch (HQ 7.0x3.5x3) |
| ESC (spec sheet) | 6S 50A |
| Insulation resistance | ≥ 0.5MΩ |
| Coil test | PASS |
| Max pull force (bench test) | 2.5kg+ (Thrust: 2538 g) |
Drawing dimensions (as labeled)
- φ19
- M5
- 4 x M3
- 33.35
- 28.10
- 14
- 8
- φ33.20
Prop test report (HQ 7.0x3.5x3, 6S)
| Throttle (%) | Voltage (V) | Current (A) | RPM | Thrust (gf) | Input Power (W) | Thrust efficiency (G/W) |
|---|---|---|---|---|---|---|
| 30 | 24.00 | 3.00 | 8569 | 407.00 | 72.00 | 5.65 |
| 40 | 24.00 | 5.20 | 10635 | 593.00 | 124.80 | 4.75 |
| 50 | 24.00 | 9.00 | 12323 | 892.00 | 216.00 | 4.13 |
| 60 | 24.00 | 13.60 | 15062 | 1164.00 | 326.40 | 3.57 |
| 70 | 23.90 | 19.20 | 16816 | 1466.00 | 458.88 | 3.19 |
| 80 | 23.90 | 27.10 | 19185 | 1932.00 | 647.69 | 2.98 |
| 90 | 23.80 | 36.00 | 20539 | 2301.00 | 856.80 | 2.69 |
| 100 | 23.70 | 42.20 | 21523 | 2538.00 | 1000.14 | 2.54 |
Temperature note (from test sheet): motor inside copper wire temperature running 2 min at 100% throttle is 98.5°C (ambient temperature is 26°C). Test base on bench for reference only.
What’s Included
- 2807 motor x1
- M3*8 screw x4
- M5 flange nut x1
Applications
- 6S multirotor builds using 7-inch propellers (based on the provided prop test setup)
Details
The BrotherHobby SE 2807 1300KV CW brushless motor features a compact black can with a threaded prop shaft for straightforward prop mounting.
BrotherHobby SE 2807 1300KV brushless motor specs list 48.0g weight and up to 2538g thrust with an HQ 7.0x3.5x3 prop at 23.7V.
The BrotherHobby SE 2807 1300KV CW brushless motor is designed to pair well with 7-inch prop setups for fast, responsive flight.
The SE 2807 1300KV motor uses a SUS420 steel shaft, 7075 aluminum caps, N52H magnets, and a high-fill stator with 10AWG wire for a durable build.
BrotherHobby SE 2807 motor hardware includes four M3x8 screws and a flange nut for a straightforward install.
BrotherHobby SE 2807 1300KV motor specs include a 4mm shaft and a 33.2mm motor diameter, along with 6S test data for a 7-inch prop.
Related Collections
