BrotherHobby SE 2816 810KV CW Brushless Motor 6S 12N14P, M5 Thread, 98.5g, HQ 10x5x3 Test
BrotherHobby SE 2816 810KV CW Brushless Motor 6S 12N14P, M5 Thread, 98.5g, HQ 10x5x3 Test
BrotherHobby
Couldn't load pickup availability
Overview
BrotherHobby SE 2816 810KV Motor (CW) is a brushless motor designed for 6S LiPo setups. It features a 12N14P configuration, Al 7075 housing components, and an M5 prop adapter shaft thread.
Key Features
- SUS420 heat-treated steel shaft
- Al 7075 base casing and bell cap
- N52H arc magnets (rotor)
- Japanese NMB bearings (12 x 6 x 4)
- 0.2mm Kawasaki silicon steel stator material
- 18# wire, 25cm length
Specifications
| Model | SE 2816 |
| KV | 810KV |
| Rotation | CW |
| No. of Cells (LiPo) | 6S |
| Configuration | 12N14P |
| Base casing | Al 7075 |
| Bell cap | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Stator dimension | 28.00 mm |
| Stator height | 12 mm |
| Motor dimension | phi34 x 46.2 mm |
| Prop adapter shaft thread | M5 |
| Shaft material | SUS420 |
| Bolt pattern | M3 (19 x 19mm) |
| Bearings | Japanese NMB 12 x 6 x 4 |
| Rotor / Magnet | N52H arc magnets |
| Wire | 18# (25cm length) |
| Weight | 98.5g |
| Weight including cable | 98.45g |
| Internal resistance | 74.60 mOhm |
| Idle current @ 10V | 1.36A/10V |
| Insulation resistance | >= 0.5MOhm |
| Dynamic balance requirement standard | <= 3mg |
| Coil test | PASS |
6S Prop Test Report (HQ 10x5x3)
| Throttle | 100% |
| ESC | 6S 55A |
| Propeller | HQ 10x5x3 |
| Max thrust | 3538 gf |
| Max power | 1302.72 W |
| Max current | 55.20 A |
| Voltage (at 100%) | 23.6 V |
| Thrust efficiency (at 100%) | 2.72 g/W |
| Copper wire temperature | 109C (ambient 30C) |
Load Test Data (HQ 10x5x3)
| Throttle (%) | Voltage (V) | Current (A) | RPM | Thrust (gf) | Input Power (W) | Thrust efficiency (g/W) |
|---|---|---|---|---|---|---|
| 30 | 24.00 | 3.40 | 5123 | 482.00 | 81.60 | 5.91 |
| 40 | 24.00 | 6.20 | 6288 | 870.00 | 148.80 | 5.85 |
| 50 | 24.00 | 13.10 | 8159 | 1471.00 | 314.40 | 4.68 |
| 60 | 24.00 | 17.30 | 8792 | 1793.00 | 415.20 | 4.32 |
| 70 | 23.90 | 26.50 | 10163 | 2286.00 | 633.35 | 3.61 |
| 80 | 23.80 | 37.60 | 10935 | 2885.00 | 894.88 | 3.22 |
| 90 | 23.80 | 42.10 | 11613 | 3082.00 | 1001.98 | 3.08 |
| 100 | 23.60 | 55.20 | 12368 | 3538.00 | 1302.72 | 2.72 |
Temperature value is the inside copper wire temperature after running 2 minutes at 100% throttle. Test data is for reference only.
What's Included
- 2816 motor x1
- M3 x 8 screw x4
- M5 flange nut x1
For installation questions or compatibility checks, contact support at https://rcdrone.top/ or support@rcdrone.top.
Details
The BrotherHobby SE 2816 810KV CW brushless motor features a black can body with a silver shaft for straightforward installation.
BrotherHobby SE 2816 810KV motor specs list up to 3538g thrust at 100% throttle with an HQ 10x5x3 prop on 6S 23.6V (55A ESC), and a 98.5g motor weight.
The BrotherHobby SE 2816 810KV brushless motor is designed to pair with a 10-inch prop for high-speed flight.
The SE 2816 810KV motor uses a SUS420 steel shaft, 7075 aluminum caps, N52H magnets, and 4×M3 mounting for reliable builds.
BrotherHobby SE 2816-810KV brushless motor comes with four M3×8 screws and an M5 flange nut for mounting.
BrotherHobby SE 2816 810KV motor documentation includes a dimension drawing plus 6S test data with an HQ 10x5x3 prop.
Related Collections
