BrotherHobby Avenger 3115 V5 CW Brushless Motor 710KV/730KV/790KV/910KV, 6S, M5, 19x19mm

BrotherHobby

$72.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

KV 710 730 910

type Three-blade folding propeller Two-blade folding propeller

Quantity

View full details

Overview

BrotherHobby Avenger 3115 V5 is a CW brushless motor designed for multirotor propulsion systems and compatible folding propeller setups. KV options shown for this series include 710KV, 730KV, 790KV, and 910KV. The design highlights easy installation and portability when used with foldable paddles.

Key Features

SUS420 heat treated steel shaft
Aviation grade 7075 aluminum caps (hard anodized); hollow-carved design for weight saving and heat dissipation
N52H arc magnets for consistent air gap and stable magnetic circuit
High precision bearings (can withstand greater axial load)
TU1 grade enameled wire (high fill slot ratio, low internal resistance)
Ultra-thin non-oriented silicon steel sheet (high permeability, low eddy loss)

Specifications

Model	Avenger 3115 V5 (CW)
KV	710KV / 730KV / 790KV / 910KV
Base casing	Al 7075
Bell cap	Al 7075
Stator	15mm
Configuration	12N14P
Rotor	N52H arc magnets
Shaft	SUS420
Prop adapter shaft thread	M5
No. of Cells (LiPo)	6S
Bolt pattern	M3 (19 x 19mm)
Bearings	12 x 6 x 4
Wire	16# (30cm length)
Weight	117g with 30cm SR wires

Dimensions (Drawing)

Overall length	49.55
Body length	41.60
Step length	18
Diameter	Ø37.50
Center / shaft area	Ø19
Top feature	Ø23
Thread	M5
Mounting	4 x M3; 3-M3

Performance Data (100% Throttle)

KV / Prop	Voltage	Max Current	Max Power	RPM	Max Thrust	Thrust Efficiency	ESC	Temp After 2min
710KV / Folding 1248 Triblade	25.2V	61.5A	1549W	11506 RPM	4974g	3.21	6S 65A	115°C (Ambient temp. 26°C)
730KV / Folding 1148 Triblade	25.2V	55.8A	1406W	11324 RPM	4443g	3.16	6S 60A	112°C (Ambient temp. 26°C)
910KV / Folding 9453F Triblade	25.2V	59.8A	1506W	15722 RPM	4340g	2.88	6S 60A	61°C (Ambient temp. 26°C)
790KV / Folding 1051 Triblade	25.2V	63A	1588W	13214 RPM	4651g	2.88	6S 70A	81.3°C (Ambient temp. 28°C)

Additional claims shown: maximum pull force for a single motor up to 5kg; one graphic lists 127g as an ultra-lightweight design value.

Folding Propeller Rotation Diameter (Hole Pitch 23mm)

Folding 9453 Triblade: rotating diameter 244.8mm
Folding 1051 Triblade: rotating diameter 259.1mm
Folding 1148 Triblade: rotating diameter 285.3mm
Folding 1248 Triblade: rotating diameter 311.1mm
Folding 1555 Triblade: rotating diameter 379.7mm
Folding 1660 Triblade: rotating diameter 395.1mm
Folding 1865 Triblade: rotating diameter 453.9mm

Note: manual measurement with slight deviation from actual data.

What’s Included

Packing lists shown for folding propeller sets (two-blade and three-blade) include the following items:

Motor
Folding propeller
Propeller connector
Screws
Spacers
Flange nut
External thread cylindrical groove
Spring (shown in the three-blade folding propeller packing list)

Notes

Installation order labels shown: (1) external threaded cylindrical groove, (2) propeller connector, (3) spacer, (4) folding propeller, (5) spacer, (6) propeller connector, (7) flange nut.

For help confirming the correct package and the required CW/CCW propeller quantity for a build, contact support at https://rcdrone.top/ or support@rcdrone.top.

Details

BrotherHobby Avenger 3115 V5 710KV/730KV/910KV Motor(CW)

The BrotherHobby Avenger 3115 V5 brushless motor is shown with foldable prop paddles and KV options listed as 710KV, 730KV, and 910KV.

BrotherHobby Avenger 3115 V5 brushless motor is rated at 127g and up to 5kg of thrust per motor.

BrotherHobby Avenger 3115 V5 thrust test data lists max thrust from 4340g to 4974g at 25.2V and 100% throttle with different KV and folding triblade props.

The BrotherHobby Avenger V5 3115 CW brushless motor is marked 3115-710KV on the can for quick identification during setup.

The BrotherHobby Avenger V5 motor uses a SUS420 heat-treated steel shaft, 7075 aluminum caps, N52H arc magnets, and precision bearings for a robust build.

BrotherHobby Avenger 3115 V5 motor dimensions and M3 mounting pattern help confirm fitment with your frame and hardware.

Folding tri-blade prop options are compared by measured rotation diameter (in mm) to help plan frame and motor clearance.

The BrotherHobby Avenger 3115 V5 brushless motor pairs with a three-blade propeller for a compact, clean drone setup.

Folding triblade paddle installation follows six steps, aligning the blade hub, screws, and top nut for a secure fit.

The BrotherHobby Avenger V5 motor comes pre-fitted with a black propeller and a compact top hub for straightforward installation.

The Avenger 3115 V5 motor uses a folding propeller setup with spacers, a propeller connector, and a flange nut for secure assembly.

Avenger V5 brushless motor comes with reverse (CCW) folding triblade propellers and a basic mounting hardware set for installation.

The Avenger 3115 V5 CW motor pairs with forward-rotating folding triblade propellers and includes the screws, washers, and hub parts needed for installation.

The BrotherHobby Avenger 3115 V5 CW motor package includes a three-blade folding propeller set with connector, screws, spacers, flange nut, and spring for installation.

The two-blade folding propeller package includes the motor, propeller blades, connector parts, screws, spacers, and a flange nut for assembly.

BrotherHobby Avenger 3115 V5 710KV motor test report lists key specs and 6S test data for a folding 1248 triblade prop setup.

BrotherHobby Avenger 3115 V5 CW is a 730KV, 12N14P motor with a 31.0 mm stator and 177 g listed weight (with 170 mm cable), plus load test data up to 25.2 V.

The Avenger 3115 V5 test report lists key specifications and thrust/current/efficiency results using a 12N14P setup with a GF1051-3 folding tri-blade prop.

The Avenger 3115 V5 910KV motor spec sheet includes a dimension drawing, key electrical specs (6S, 12N14P, 112 g), and load-test thrust/current data with a 9453F folding prop.