BrotherHobby Tornado T10 5215 Pro II 430KV CW Brushless Motor, 8S Test Data, M6 Shaft, 339g
BrotherHobby Tornado T10 5215 Pro II 430KV CW Brushless Motor, 8S Test Data, M6 Shaft, 339g
BrotherHobby
Couldn't load pickup availability
Overview
BrotherHobby Tornado T10 5215 Pro II Motor (CW) is a 430KV outrunner motor designed for multirotor propulsion with large propeller setups (test report: HQ 15×7×3 tri-blade). The product labeling includes “T10 5215 430KV PRO II”.
Key Features
- Maximum pull force: 8kg+ (single motor)
- Test report max thrust: 8038gf (HQ 15×7×3, 33.60V, 100% throttle)
- Materials and structure: Al 7075 base casing / Al 7075 bell cap, 0.2mm Kawasaki silicon steel stator, N52H arc magnet rotor, SUS420 shaft
- Wire: TU1 grade enameled wire; listed lead wire: 16# (AWG), 900mm
- High precision bearings; listed bearing size: 16×8×5
Specifications
| Model | Tornado T10 5215 Pro II (CW) |
| KV | 430KV |
| Configuration | 12N14P |
| Base casing | Al 7075 |
| Bell cap | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Rotor / Magnet | N52H arc magnet |
| Shaft | SUS420 |
| Prop adapter shaft thread | M6 |
| Bolt pattern | M4 (25×25mm); M4 (30×30mm) |
| Bearing size | 16×8×5 |
| AWG / Lead wire | 16#, 900mm length |
| Weight | 339g with 90cm SR wires; 339.78g including cable; 340g (listed) |
| Stator dimension | 52.80mm |
| Stator height | 15mm |
| Motor dimension | 59.8×67.6mm |
| Internal resistance | 52.22mΩ |
| Idle current | 1.97A / 10V |
| Insulation resistance | >= 0.5MΩ |
| Dynamic balance requirement | <= 3mg |
| Coil test | PASS |
| No. of Cells (LiPo) | 6S-12S (listed); 8S (test report) |
| ESC | 8S 80A |
| Propeller (test) | HQ 15×7×3 |
| Max current (test) | 74.30A |
| Max power (test) | 2496.48W |
Mechanical drawing markings
- Thread marking: M6
- Hole marking: 8-M4
- Diameter markings: Dia. 25; Dia. 30; Dia. 24
- Length/step markings: 67.6; 40.6; 27; 18
Load Test Data (HQ 15×7×3, 33.60V)
| Throttle (%) | Voltage (V) | Current (A) | RPM | Thrust (gf) | Input Power (W) | Thrust efficiency (G/W) |
|---|---|---|---|---|---|---|
| 30 | 33.60 | 3.90 | 3845 | 1206.00 | 131.04 | 9.20 |
| 40 | 33.60 | 9.80 | 5256 | 2292.00 | 329.28 | 6.96 |
| 50 | 33.60 | 17.20 | 6258 | 3299.00 | 577.92 | 5.71 |
| 60 | 33.60 | 27.80 | 7249 | 4446.00 | 934.08 | 4.76 |
| 70 | 33.60 | 43.00 | 8158 | 5808.00 | 1444.80 | 4.02 |
| 80 | 33.60 | 59.70 | 8951 | 7141.00 | 2005.92 | 3.56 |
| 90 | 33.60 | 70.10 | 9337 | 7796.00 | 2355.36 | 3.31 |
| 100 | 33.60 | 74.30 | 9467 | 8038.00 | 2496.48 | 3.22 |
Temperature note (test report): inside motor copper wire temperature 47.6°C after running 2 minutes at 100% throttle (ambient temperature 28°C).
For compatibility questions (propeller/ESC/battery matching) or order support, contact https://rcdrone.top/ or email support@rcdrone.top.
Applications
- Multirotor propulsion setups using large tri-blade propellers (HQ 15×7×3 test reference)
- High-thrust single-motor applications requiring up to 8038gf thrust (test data)
Details
The Tornado T10 5215 Pro II 430KV brushless motor features a threaded M6 shaft and a compact, vented black housing for multirotor builds.
Tornado T10 5215 Pro II 430KV motor uses a threaded shaft and includes 8S test data such as 33.6V, 74.3A max current, and 8038g max thrust.
The T10 5215 Pro II 430KV motor is designed for use with a 15-inch three-blade propeller setup.
The Tornado T10 5215 Pro II motor uses a high-slot-ratio stator, N52H arc magnets, and 7075 aluminum end caps with premium bearings for a robust build.
BrotherHobby Tornado T10 5215 Pro II 430KV motor data includes a dimension drawing and an 8S test table using an HQ 15×7×3 prop.
Related Collections
Explore More Drones & Accessories
-
Camera Drone
Our Camera Drone Collection features a wide range of brands including FIMI,...
-
Drone Accessories
Discover a wide range of drone accessories to enhance flight performance, extend...
