Overview
The Flashhobby Spaceman 10A ESC (electronic speed controller) is a programmable speed controller with a 5V/2A BEC for brushless helicopter and airplane applications. It supports throttle signal refresh rates from 50Hz to 432Hz and provides multiple setup options for braking, battery type, low-voltage protection, startup behavior, and motor timing.
Key Features
- Continuous current: 10A; burst current (≤10s): 12A
- 5V/2A BEC; BEC output capability: 4 servos (2-4S)
- Throttle signal refresh rate: 50Hz to 432Hz
- Programmable brake, battery type, low-voltage cutoff, startup mode, and timing
Specifications
| Item | 30010 |
| Weight | 14.8 |
| Size | 34*24*8mm |
| BEC Mode | N/A |
| BEC | 5V/2A |
| BEC Output Capability | 4 servos (2-4S) |
| Continuous Current | 10A |
| Burst Current | 12A (≤10s) |
| Throttle Signal Refresh Rate | 50Hz to 432Hz |
Programmable Items
- Brake Setting: Enabled / Disabled
- Battery Type: Lipo / NiMH
- Low Voltage Protection Mode (Cut-Off Mode): Soft Cut-Off (gradually reduce the output power) / Cut-Off (immediately stop the output power)
- Low Voltage Protection Threshold (Cut-Off Threshold): Low / Medium / High
- Startup Mode: Normal / Soft / Super-Soft (300ms / 1.5s / 3s)
- Normal mode is suitable for fixed-wing aircraft. Soft or Super-soft modes are suitable for helicopters.
- Soft and Super-Soft modes have slower initial acceleration. It takes 1.5 seconds (Soft) or 3 seconds (Super-Soft) from initial throttle advance to full throttle.
- If the throttle is completely closed and opened again within 3 seconds after the first startup, the re-startup will be temporarily changed to Normal mode to reduce the chance of slow throttle response.
- Timing: Low / Medium / High (3.75°/15°/26.25°)
- Low timing is suitable for most motors; High timing can be chosen for higher speed.
Low Voltage Protection Threshold Details
- For lithium battery: cell number is calculated automatically. Low/Medium/High cutoff voltage per cell: 2.85V / 3.15V / 3.3V.
- Example: for a 3S Lipo with “Medium” cutoff threshold, cut-off voltage = 3.15*3 = 9.45V.
- For NiMH battery: Low/Medium/High cutoff voltages are 0% / 50% / 65% of the startup voltage (initial voltage of the battery pack). 0% means the low voltage cut-off function is disabled.
- Example: for a 6-cell NiMH battery, fully charged voltage = 1.44*6 = 8.64V; with “Medium” cut-off threshold, cut-off voltage = 8.64*50% = 4.32V.
Applications
- Brushless helicopter
- Brushless airplane / fixed-wing aircraft
For setup help or compatibility questions before ordering, contact support at https://rcdrone.top/ or email support@rcdrone.top.
Details

The Flashhobby Spaceman 10A ESC comes pre-wired with a JST power connector, three motor leads, and a standard servo signal plug for quick installs.

The Flashhobby Spaceman 10A ESC weighs about 14.8g and comes with attached power and signal leads for compact RC setups.

The Flashhobby Spaceman 10A ESC comes with pre-wired leads, bullet-style motor connectors, and a receiver-style signal plug for straightforward hookups.
Related Collections

Explore More Drones & Accessories
-
Camera Drone
Our Camera Drone Collection features a wide range of brands including FIMI,...
-
Drone Accessories
Discover a wide range of drone accessories to enhance flight performance, extend...