Overview
The Flashhobby Spaceman 80A ESC is an electronic speed controller for brushless RC aircraft, supporting LiPo 2-6S and a built-in 5V/7A switch-mode BEC.
Key Features
- Continuous current: 80A; burst current (≤10s): 100A
- Switch-mode BEC: 5V/7A; BEC output capability: 6~8 servos (2-6S)
- Throttle signal refresh rate: 50Hz to 432Hz
- Programmable brake, battery type, low-voltage protection, startup mode, and timing
For setup and compatibility questions (battery, motor, servo count, receiver throttle signal), contact support@rcdrone.top or visit https://rcdrone.top/.
Specifications
| Model / Item | Spaceman 80A / 30080 |
| Type | ESC (Electric Speed Controller) |
| Battery | LiPo 2-6S (label); Battery type setting: LiPo / NiMH |
| Continuous Current | 80A |
| Burst Current | 100A (≤10s) |
| BEC Mode | Switch |
| BEC Output | 5V/7A |
| BEC Output Capability | 6~8 servos (2-6S) |
| Throttle Signal Refresh Rate | 50Hz to 432Hz |
| Size | 86*38*12mm |
| Weight | 84g (scale reading shown: 84.4g) |
| Label Text | "80A", "5V@7A BEC", "Lipo 2-6S", "Electric Speed Controller", "Made in China"; label marks: CE, FC |
Programmable Items
- Brake Setting: Enabled / Disabled
- Battery Type: Lipo / NiMH
- Low Voltage Protection Mode (Cut-Off Mode): Soft Cut-Off (gradually reduce the output power) / Cut-Off (immediately stop the output power)
- Low Voltage Protection Threshold (Cut-Off Threshold): Low / Medium / High
- For lithium battery, the battery cell number is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.85V / 3.15V / 3.3V. For example: for a 3S Lipo, when “Medium” cutoff threshold is set, the cut-off voltage will be: 3.15*3=9.45V.
- For NiMH battery, low / medium / high cutoff voltages are 0% / 50% / 65% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: for a 6 cells NiMH battery, fully charged voltage is 1.44*6=8.64V; when “Medium” cut-off threshold is set, the cut-off voltage will be: 8.64*50%=4.32V.
- Startup Mode: Normal / Soft / Super-Soft (300ms / 1.5s / 3s)
- Normal mode is suitable for fixed-wing aircraft. Soft or Super-soft modes are suitable for helicopters.
- The initial acceleration of the Soft and Super-Soft modes are slower: 1.5 seconds for Soft startup or 3 seconds for Super-Soft startup from initial throttle advance to full throttle.
- If the throttle is completely closed and opened again within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode.
- Timing: Low / Medium / High (3.75° / 15° / 26.25°)
- Usually, low timing is suitable for most motors. To get higher speed, High timing value can be chosen.
Applications
- Brushless helicopter and fixed-wing airplane models
Details

The Flashhobby Spaceman 80A ESC comes prewired with motor leads, a 3-wire receiver plug, and an XT60-style battery connector, with a 2–6S LiPo rating printed on the case.

The Flashhobby 80A ESC features an XT60 battery connector, three motor leads, and a displayed weight of 84.4g for build planning.

The Flashhobby Spaceman ESC comes with an XT60 battery connector and three motor leads to simplify wiring for brushless setups.
Related Collections
