Flashhobby CLS3850MED 50KG 8.4V CLS Servo, Coreless Programmable Digital Servo, IP67, 25T Spline
Flashhobby CLS3850MED 50KG 8.4V CLS Servo, Coreless Programmable Digital Servo, IP67, 25T Spline
Flashhobby
Couldn't load pickup availability
Overview
The Flashhobby CLS3850MED is a programmable digital servo (CLS servo) designed for high-torque applications up to 8.4V. It uses a coreless motor and a 14-bit magnetic encoder, supports multiple control modes (Sanwa SSR/SUR, Flysky NB4 SFR, Futaba SR), and features an IP67-rated water resistant and waterproof case.
Key Features
- Programmable PWM digital amplifier
- 32-bit MCU with 14-bit magnetic encoder
- Wide operating voltage: DC 6.0~8.4V
- Steel gears; high precision gear train
- Dual ball bearing supported output shaft (2BB)
- 25-tooth output spline
- Diamond cut aluminum heat sink shell; full aluminum CNC case (AL6061 stated)
- Water resistant and waterproof case: IP67
- Compatible refresh rate: 50Hz~1000Hz
Programmable Functions
- End point adjustments
- Direction
- Fail safe
- Dead band
- Speed (slower)
- Soft start rate
- Overload protection
- Data save / load
- Program reset
Specifications
| Model | CLS3850MED |
|---|---|
| Control system | PWM control (1500usec in the central point) |
| Operating voltage range | DC 6.0~8.4V |
| Operating speed | 0.15sec/60° @ 6.0V; 0.12sec/60° @ 7.4V; 0.11sec/60° @ 8.4V |
| Stall / standing torque | 38.0kg-cm / 528 oz-in @ 6.0V; 45.0kg-cm / 625 oz-in @ 7.4V; 50.0kg-cm / 694 oz-in @ 8.4V |
| Running current | 3400mA @ 6.0V; 4000mA @ 7.4V; 4800mA @ 8.4V |
| Motor type | Coreless |
| Signal type | Digital control |
| Angle sensor | 14-bit magnetic encoder |
| Refresh rate | Compatible 50Hz~1000Hz |
| Pulse width | 500 to 2500 uSec |
| Dead band width | 2uSec |
| Operation temperature range | -20°C to +70°C |
| Operation travel | 180° ± 5° |
| Programmable angle | Yes |
| Direction | CW |
| Driver type | Mos Drive |
| Ball bearing | 2BB |
| Gear | Steel gears |
| Waterproof level | IP67 |
| Case material | Full aluminum CNC; CNC AL6061 aluminum case stated |
| Output spline | 25-tooth |
| Dimensions | 40 x 20 x 38mm |
| Weight | 80g; 78.8g (without servo horn) stated |
| Connector wire length | 22AWG 260mm JR; 300MM JR plug stated |
| Wire info | Black: Negative; Black: Positive; White: S Single |
| Service life (no load) | > one million times without load |
| Mode compatible | Sanwa SSR/SUR; Flysky NB4 SFR; Futaba SR |
What’s Included
- Flashhobby CLS3850MED servo
- Servo horns / arms and mounting hardware set
For installation or control-mode compatibility questions, contact support@rcdrone.top or visit https://rcdrone.top/.
Details
The Flashhobby CLS3850MED coreless servo features a compact black metal housing with a 50KG marking for high-torque RC setups.
Flashhobby CLS3850MED coreless servo features an IP67 water-resistant, waterproof case and a 50kg rating on the housing.
Flash Hobby CLS3850MED coreless servo is labeled 50KG at 8.4V with an IP67-rated, diamond-cut aluminum heat-sink case.
The Flashhobby CLS3850MED servo uses a 25-tooth output spline and comes with servo horns, screws, and bushings for installation.
Flashhobby CLS3850MED digital servo runs on DC 6.0–8.4V, is rated IP67, and measures 40×20×38mm (80g).
Related Collections
