• iFlight BLITZ F7 FPV flight controller board stack with JST connectors, mounting holes, and capacitor
  • iFlight BLITZ F7 FPV flight controller PCB with labeled VBAT/GND and M1–M4 pads and a multi-pin connector
  • iFlight BLITZ F7 FPV flight controller board with USB port, boot button, and labeled solder pads
  • iFlight BLITZ F7 FPV flight controller board with USB-C port, plug connectors, and corner mounting standoffs
  • Top view of iFlight BLITZ F7 FPV flight controller board with labeled solder pads, USB port, and mounting holes.
1 5

iFlight BLITZ F7 FPV Flight Controller & 4-in-1 ESC Stack (E55S, STM32F722, 2-6S, 55A/65A)

iFlight BLITZ F7 FPV Flight Controller & 4-in-1 ESC Stack (E55S, STM32F722, 2-6S, 55A/65A)

iFlight

$110.75 USD
$110.75 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
View full details

Overview

The iFlight BLITZ F7 Stack (E55S 4-IN-1 ESC) is an FPV flight controller & 4-in-1 ESC stack featuring an improved circuit design for lower electrical noise, a DJI HD VTX plug-and-play connector, onboard indicator LEDs for debugging, and an integrated LC filter.

Key Features

  • Improved circuit design, better components, and lower electrical noise
  • DJI HD VTX connector (plug-and-play / no soldering required)
  • FC indicator LEDs for visual debugging
  • LC filter
  • Smartaudio / IRC Tramp VTX protocol supported

For compatibility questions or setup help, contact support@rcdrone.top or visit https://rcdrone.top/.

Specifications

BLITZ F7 V1.2 Flight Controller

MCU STM32F722
Gyro ICM42688
Barometer DPS310
OSD Chip AT7456E
Flash 32MB (Blackbox flash)
UARTS 6
Motor outputs 4x (SH1.0 connector)
I2C serial SDA / SLA pads
VTX protocols Smartaudio / IRC Tramp supported
LED controller Yes
Beeper pad Yes
Firmware target IFRC-IFLIGHT_BLITZ_F722
Mount pattern 30.5*30.5mm / 4mm PCB hole diameter
Dimensions 36.5*35 mm
Weight 7.8g
BEC 5V 2.5A / 9V 2A

BLITZ E55S 4-IN-1 ESC

Mounting holes 30.5*30.5mm/Φ4mm
Weight 14.7g
Input Supports 2-6S lipo input
MCU BB21
Constant current 55 Amps
Burst current 65 Amps
Current sensor Yes
BEC No
Current rate 200
Signal support DShot150/300/600, MultiShot, OneShot, etc.
Target Q-H-25 16.7(BlheliS) / Bluejay Q-H-25 (Bluejay)

Wiring Suggestion

  • UART 1: VTX HD / Analog
  • UART 2: Receiver
  • UART 3/4/5: GPS or other sensors that require a serial port
  • UART 6: ESC telemetry

What’s Included

  • 1 x BLITZ F7 V1.2 Flight Controller
  • 1 x BLITZ E55S 4-IN-1 ESC (packing list text labels this as 45A 2-6S; ESC specifications list 55A constant / 65A burst)
  • 1 x Screw Bag

Note

iFlight product is for fun purposes only and does not support autonomous flight.

Related Collections