iFlight BLITZ 25mW Race VTX 5.8G FPV Video Transmitter + LED Controller, 2-6S, IPEX

Overview

The iFlight BLITZ 25mW Race VTX is a 5.8G FPV video transmitter (VTX) designed for FPV competitions, featuring an integrated VTX + LED control module for a cleaner, simpler installation. It supports independent control of LED strip colors and VTX frequency, uses a full plug design for easy wiring, and also provides solder pads on the back for customization.

Key Features

• Integrated video transmitter and LED control module for easier, cleaner installation
• Separate CH (frequency) button for switching
• Independent control of LED strip colors and VTX frequency
• Double mounting holes: 30.5*30.5mm / 20*20mm
• Plug and play wiring; solder pads reserved on the back
• Fixed transmitting power

Specifications

VTX Instructions

• Adjust frequency table: Short press the CH button to switch the frequency.
• PIT mode: Long press CH button for 3 seconds to enter PIT mode; long press for 3 seconds again to exit PIT mode.
• LED color: Long press CH button for 1 second to change the color of the LED strip.
• When adjusting via flight controller OSD: The CH button will be invalid. To use the CH button, close the serial port protocol of the flight controller connected to the VTX RX, or do not connect the RX connector to the flight controller.

What’s Included

• 1 x BLITZ 5.8G 25mW RACE VTX
• 1 x iPex/UFL to M2 SMA F Adapter Cable
• 1 x Cable set

For installation or compatibility questions (connectors, OSD control, PIT mode, antenna adapters), contact support@rcdrone.top or visit https://rcdrone.top/.