iFlight BLITZ H7 Pro Flight Controller + BLITZ E80 BLHeli32 Single ESC Combo Set (4S-12S FC, 2-8S 80A ESC)

Overview

The iFlight BLITZ H7 Pro Combo Set is a flight controller and single ESC combo set, combining the BLITZ H7 Pro Flight Controller with BLITZ E80 BLHeli32 DShot600 single ESCs for multi-motor builds. The flight controller uses a dual-sided shielding design with detachable shielding for easier TF card replacement, supports Betaflight and ArduPilot firmware, and accepts 14.8V-50.4V (4S-12S LIPO) input.

Note

Since BLHeli32 configuration is closed due to regulatory issues, if ESC parameter adjustment is required, download “BLHeliSuite32Test” from the product download section.

Key Features

BLITZ H7 Pro Flight Controller

• Dual-sided shielding design for interference protection and protection from foreign object malfunctions
• Detachable shielding for easy TF card replacement
• 35 x 35 mm mounting holes for optimized PCB wiring space
• GH1.25 connector design for reliable connections and easier assembly
• SD card blackbox support for increased flight data recording capacity
• Removable expansion soldering pad board for additional peripherals
• High-voltage DC-DC buck converter with chip voltage endurance up to 100V for stable power delivery to the flight controller and video transmission
• Supports Betaflight and ArduPilot firmware

BLITZ E80 BLHeli32 Single ESC

• 2-8S input (max 8S)
• 80A continuous / 100A burst current rating
• 8-layer 4OZ copper PCB
• 11x TDK MLCC low ESR capacitors (total 420UF) for lower ripple and improved stability
• NTMFS5C430NL MOSFET
• 1x 3528 LED for power-on display
• Current sensor and telemetry supported
• Protocol support: DShot150/300/600, MultiShot, OneShot

Specifications

BLITZ H7 Pro Flight Controller

BLITZ E80 Single ESC

FC Wiring Suggestion

• UART1: VTX HD/Analog
• UART2: Receiver
• UART4: GPS
• UART5: ESC Telemetry
• 8x Dshot/PWM outputs
• 2x I2C for GPS Mag

ESC Support

• Current sensor
• Telemetry output
• Motor timing
• Brake on Stop

What’s Included

• 1 x BLITZ H7 Pro Flight Controller
• 1 x BLITZ Pro PDB (Combo1/2)
• 1 x Screws Pack
• 1 x USB Adapter Board
• Combo1: 8 x BLITZ E80 Single ESC with CNC Alum Cover; 8 x 50V 1000UF capacitor; 8 x Power cables & ESC signal wires
• Combo2: 4 x BLITZ E80 Single ESC with CNC Alum Cover; 4 x 50V 1000UF capacitor; 4 x Power cables & ESC signal wires

For compatibility questions, wiring help, or order support, contact https://rcdrone.top/ or email support@rcdrone.top.