• iFlight GM5208-12 Brushless Gimbal Motor, iFlight GM5208 brushless gimbal motor in black housing with GM5208 label and bottom mounting holes
  • iFlight GM5208-12 Brushless Gimbal Motor, iFlight GM5208 brushless gimbal motor in black housing with POWER MOTOR GM5208 label and mounting base plate
1 2

iFlight GM5208-12 Brushless Gimbal Motor with AS5048A Encoder, 12N14P, Hollow Shaft, 3-5S

iFlight GM5208-12 Brushless Gimbal Motor with AS5048A Encoder, 12N14P, Hollow Shaft, 3-5S

iFlight

$79.84 USD
$79.84 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
View full details

Overview

iFlight GM5208-12 is a brushless gimbal motor with encoder, designed for direct-drive camera stabilization setups. The GM52 series is intended for DSLR-sized camera payloads such as CANON 5D MARKII / MARKIII and RED Epic & DSLR sized gear, with a stated load torque of 1800–2500 g·cm.

Brushless direct-drive gimbal stabilization using BLDC motors follows a similar operating principle to hobby servo-based gimbals, while using a direct-drive motor approach.

Key Features

  • GM5208-12 brushless gimbal motor with AS5048A encoder (aluminum case)
  • 12N/14P motor configuration
  • Hollow shaft design (specified OD/ID)
  • Clockwise steering (axle extension)
  • 3–5S working voltage range

Specifications

Model GM5208-12
Motor outer diameter 63 ±0.05 mm
Configuration 12N/14P
Motor height 30.7 ±0.2 mm (included with encoder housing)
Hollow shaft OD 15 -0.008/-0.012 mm
Hollow shaft ID 12 +0.05/0 mm
Wire length 610 ±3 mm
Cable AWG #24
Motor weight 209 ±0.5 g
Wire plug 2.5 mm Dupont connector
No-load current 0.09 ±0.1 A
No-load voltage 20 V
No-load RPM 456–504 RPM
Load current 1 A
Load voltage 20 V
Load torque 1800–2500 g·cm
Motor internal resistance 15.2 ohm ±5% (resistance varies with temperature)
High voltage test DC 500 V 10 mA @ 1 sec
Rotor housing runout ≤ 0.1 mm
Steering (axle extension) Clockwise
High temperature test Keep at 60°C for 100 hours; motor can work normally after 24 hours at room temperature
Low temperature test Keep at -20°C for 100 hours; motor can work normally after 24 hours at room temperature
Maximum power ≤ 40 W
Working voltage 3–5S
Working temperature / humidity -20 to 60°C; 10 to 90% RH

What’s Included

  • 1 x iPower GM5208-12 gimbal motor
  • 1 x AS5048A encoder with aluminum case

Applications

  • Direct-drive brushless camera gimbals
  • DSLR camera stabilization (e.g., CANON 5D MARKII / MARKIII)
  • Large multi-rotor camera platforms using gimbal stabilization

For compatibility questions (encoder integration, wiring/connector matching, and system setup), contact support at https://rcdrone.top/ or email support@rcdrone.top.

Related Collections