• iFlight GM5208-12 Brushless Gimbal Motor, Black GM5208 brushless gimbal motor with flat mounting plate and multiple screw holes, labeled iPower Motor
  • iFlight GM5208-12 Brushless Gimbal Motor, GM5208 brushless gimbal motor with round housing, top mounting holes, and center shaft opening
1 2

iFlight GM5208-12 Brushless Gimbal Motor (GM52 Series) 12N/14P, 3-5S, 1800-2500 g·cm Torque

iFlight GM5208-12 Brushless Gimbal Motor (GM52 Series) 12N/14P, 3-5S, 1800-2500 g·cm Torque

iFlight

$51.39 USD
$51.39 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
View full details

Overview

The iFlight GM5208-12 is a brushless gimbal motor (GM52 series by iPower Motors) designed for camera stabilization systems using brushless direct-drive (BLDC) motors. It is intended for DSLR setups including CANON 5D MARKII / MARKIII, and for large-scale multi-rotor platforms lifting RED Epic & DSLR-sized gear, with specified load torque of 1800–2500 g·cm.

Key Features

  • Brushless direct-drive motor for gimbal stabilization
  • 12N/14P configuration
  • Hollow shaft design (OD and ID specified below)
  • Low runout rotor housing (≤0.1 mm)
  • Specified operating range: 3–5S, -20 to 60 °C, 10–90% RH

Specifications

Model GM5208
Motor outer diameter Dia. 63 ± 0.05 mm
Configuration 12N/14P
Motor height 22.7 ± 0.2 mm
Hollow shaft (OD) Dia. 15 -0.008/-0.012 mm
Hollow shaft (ID) Dia. 12 +0.05/0 mm
Wire length 610 ± 3 mm
Cable AWG #24
Motor weight 195 ± 0.5 g
Wire plug 2.5 mm dupont connector
No-load current 0.09 ± 0.1 A
No-load volts 20 V
No-load RPM 456–504 RPM
Load current 1 A
Load volts 20 V
Load torque 1800–2500 g·cm
Motor internal resistance 15.2 Ω ± 5% (resistance varies with temperature)
High voltage test DC500V 10mA @ 1 sec
Rotor housing runout ≤ 0.1 mm
Steering (axle extension) Clockwise
High temperature test Keep at 60 °C for 100 hours; motor can work normally after 24 hours at room temperature
Low temperature test Keep at -20 °C for 100 hours; motor can work normally after 24 hours at room temperature
Maximum power ≤ 40 W
Working voltage 3–5S
Working temperature -20 to 60 °C; 10–90% RH

What’s Included

  • 1 × GM5208-12 gimbal motor

Applications

  • Brushless gimbal stabilization for DSLR cameras (including CANON 5D MARKII / MARKIII)
  • Multi-rotor aerial platforms lifting RED Epic & DSLR-sized camera payloads

For compatibility and integration assistance (mounting, wiring/connector matching, and controller selection), contact support@rcdrone.top or visit https://rcdrone.top/.

Related Collections