• iFlight GM110-8 gimbal combo with three round brushless motors, 32-bit gimbal controller board, sensor and cables
  • Alexmos 32-bit gimbal controller PCB with labeled ports (+5V/GND/Rx/Tx, BAT-, 5V_SW) and small IMU board
  • Alexmos 32-bit gimbal controller board with micro USB, labeled RX/TX pins, and separate IMU sensor module
1 3

iFlight GM110-8 Combo Set – 3× GM110-8 Gimbal Motors + Alexmos 32BIT BGC, 110mm 24N/28P

iFlight GM110-8 Combo Set – 3× GM110-8 Gimbal Motors + Alexmos 32BIT BGC, 110mm 24N/28P

iFlight

$889.99 USD
$889.99 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
View full details

Overview

The iFlight GM110-8 Combo Set is a combo set for building high-quality 3-axis camera stabilizing systems for UAV mounting and handheld camera stabilizers. The included controller is a new development direction for stabilizing solutions, designed to replace the previous 8-bit version of the SimpleBGC controller while keeping 100% back-compatibility and adding new functionality.

Key Features

  • Controller board size: 50×50 mm
  • Mounting hole spacing: 45 mm; mounting hole diameter: 3 mm
  • Controller power supply voltage: 3S to 6S
  • Maximum motor current (controller): 1.5 A
  • 5V output for external devices: up to 1 A
  • GM110-8 gimbal motor configuration: 24N/28P

Specifications

Controller (Alexmos 32BIT BGC set, without alum case)

Board size 50×50 mm
Mounting hole distance 45 mm
Mounting hole diameter 3 mm
Power supply voltage 3S to 6S
Maximum motor current 1.5 A
5V output current Up to 1 A

Gimbal Motor (GM110-8, each)

Model GM110-8
Motor outer diameter 110 ±0.05 mm
Configuration 24N/28P
Motor height 26 ±0.2 mm (included with encoder housing)
Hollow shaft (OD) N/A
Hollow shaft (ID) N/A
Wire length 610 ±3 mm
Cable AWG #24
Motor weight 534 ±1 g
Wire plug 2.5 mm dupont connector
No-load current 0.09 ±0.1 A
No-load voltage 20 V
No-load RPM 125~139 RPM
Load current 2 A
Load voltage 20 V
Load torque (g) 8000-12000
Motor internal resistance 20.19 Ω ±5% (resistance varies with temperature)
High voltage test DC500V 1 mA @ 2 sec
Rotor housing runout ≤0.1 mm
Steering (axle extension) Clockwise
High temperature test Keep at 60°C for 100 hours; motor works normally after 24 hours at room temperature
Low temperature test Keep at -20°C for 100 hours; motor works normally after 24 hours at room temperature
Maximum power ≤60 W
Working current 4-6S
Working temperature -20~60°C; 10~90% RH

What’s Included

  • 3 × GM110-8 gimbal motor
  • 1 × Alexmos 32BIT BGC set (without alum case)
  • 1 × connecting cables set

For installation, compatibility, or setup questions, contact support@rcdrone.top or visit https://rcdrone.top/.

Related Collections