MAD M17 IPE V1.1 Drone Motor 100KV/110KV, 12S-14S Heavy-Lift, Up to 28.8kg Thrust, IP35

Overview

The MAD M17 IPE V1.1 is a heavy-lift drone motor designed for high-thrust industrial UAV builds. It is optimized for use with 32–36 inch carbon fiber propellers and targets a high thrust-to-weight ratio for demanding payload platforms.

Key Features

• Two KV options shown: 100KV and 110KV
• Number of pole pairs: 15
• Anticorrosive stator (listed as TAIWAN / Anticorrosive)
• Varnished wire degree: 220°C
• Magnet degree: 180°C
• Degree of protection: IP35
• Centrifugal heat dissipation: YES
• Rotor balance: ≤10 mg; motor balance: ≤20 mg
• Disruptive test: 500 V

Specifications

Motor Data (Common)

100KV Specifications

110KV Specifications

Mounting / Drawing Dimensions

• Motor diameter: Ø118
• Side dimension shown: 37.3; spacing shown: 4
• Motor mounting holes: Ø40-M4×4 and Ø50-M4×4
• Propeller mounting holes: Ø23-M3×4
• Additional hole patterns shown: Ø20-M3×4; Ø20-Ø3.2×4; Ø6
• Additional dimensions shown: 19, 10, 10.8, 4.2, 3, 1

What’s Included

• Motor x1
• Propeller plate x1
• Prop adapter x1
• 4.0mm bullet connector x3
• Heat shrinkable tube x3
• M4*10 motor screws x4
• M4*10 prop adapter screws x4
• M3*14 propeller screws x4
• Sticker x2

Applications

• Heavy-lift drones for logistics, firefighting, and industrial inspection
• UAV platforms requiring high thrust with weight efficiency
• High-payload aerial platforms requiring stable power output

For ESC/propeller matching and integration questions, contact support@rcdrone.top or visit https://rcdrone.top/.

Test Data (48 V reference)

Analytical graph definition: I = Current, P = Input Power, η = Electrical Efficiency, T = Thrust, N = Rotational Speed. The data was measured with an input voltage of 48 V, at a temperature of 25°C and sea level; rotational speed was adjusted by throttle.

100KV - FLUXER PRO 32x9.6 MATT - AMPX 120A (5-14S) - 12S (MAX 74°C)

100KV - FLUXER PRO 34x11.2 GLOSSY - AMPX 120A (5-14S) - 12S (MAX 92°C)

100KV - FLUXER PRO 34x11.2 GLOSSY - AMPX 200A (5-14S) - 14S (MAX 133°C)

100KV - FLUXER PRO 36x11.5 GLOSSY - AMPX 120A (5-14S) - 12S (MAX 122°C)

The above data are the theoretical values when the input voltage is 48 V, for reference only. In the case of room temperature of 25°C and no additional cooling device, the current over 123 A is non-working zone. 35–123 A is short-term (about 10–30 s), working zone, and below 35 A is sustainable working zone. In actual use, control the motor running time according to the working environment temperature and heat dissipation conditions.

110KV - FLUXER PRO 32x9.6 MATT - AMPX 120A (5-14S) - 12S (MAX 98°C)

The above data are the theoretical values when the input voltage is 48 V, for reference only. In the case of room temperature of 25°C and no additional cooling device, the current over 88 A is non-working zone. 26–88 A is short-term (about 10–30 s), working zone, and below 26 A is sustainable working zone. In actual use, control the motor running time according to the working environment temperature and heat dissipation conditions.

Details

MAD M17 IPE V1.1 motor mounting dimensions include a 37.3 mm body diameter, 18 mm height, and multiple M3/M4 bolt patterns for fitment.

The MAD M17 IPE V1.1 motor kit includes a motor, propeller plate and adapter, screws, 4.0mm bullet connectors, heat-shrink tubing, and stickers.

MAD M17 IPE V1.1 motor documentation includes key stats like 100KV and 857g weight, plus thrust curves and mounting dimensions for easier setup.

MAD M17 IPE V1.1 motor test data lists thrust, RPM, current, and efficiency across multiple prop sizes on 12S and 14S setups.

The MAD M17 IPE V1.1 motor is rated at 110KV with up to 12S input, with a performance chart and spec table for tuning and setup reference.