SpeedyBee Programmable 2812 Arm Light LED Strip Set (4pcs) 5V DIN/DO, SH1.0 Cable, Chainable
SpeedyBee Programmable 2812 Arm Light LED Strip Set (4pcs) 5V DIN/DO, SH1.0 Cable, Chainable
SpeedyBee
Couldn't load pickup availability
Overview
SpeedyBee Programmable 2812 Arm Light is a LED strip set (4 pcs) designed for FPV drone arms, supporting connection to a flight controller with or without soldering. It provides 5V power and addressable LED signal input/output for chaining strips.
Key Features
- Two connection methods to flight controller: soldering or connector
- Supports connecting in series with or without soldering
- Up to 8 LED strips in series max
- Betaflight limit noted: 32 individual LEDs
- Signal/power pads and direction marking: DIN (LED signal input), DO (LED signal output), 5V, G (GND)
Specifications
| Model marking | SpeedyBee 2812-ARMLIGHT (4) |
| Length | 37mm |
| Width | 6.5mm |
| Height | 4.3mm |
| Weight shown | 1.18g |
| LED signal | DIN (input) / DO (output) |
| Power | 5V input/output, G (GND) |
| Viewing angle (20) | Typ 120 deg (IF=12mA) |
| Luminous intensity (IV) - Red | Min 200 mcd, Max 400 mcd (IF=12mA) |
| Luminous intensity (IV) - Green | Min 800 mcd, Max 1000 mcd (IF=12mA) |
| Luminous intensity (IV) - Blue | Min 200 mcd, Max 400 mcd (IF=12mA) |
| Wavelength (D) - Red | Min 620 nm, Max 625 nm (IF=12mA) |
| Wavelength (D) - Green | Min 525 nm, Max 530 nm (IF=12mA) |
| Wavelength (D) - Blue | Min 465 nm, Max 470 nm (IF=12mA) |
| Backward current (IR) | Max 1 uA (VR=7V) |
| Luminance codes | Red: K07; Green: K30; Blue: K07 |
| Wavelength codes | Red: R0; Green: G13; Blue: PB12 |
For installation and compatibility questions, contact [email protected] or visit https://rcdrone.top/.
Whatโs Included
- LED Strip*4
- 50mm 3pin SH1.0 female cable
- 35MM heat shrink tube*4
Applications
- FPV drone arm lighting and orientation
- Addressable LED builds using 5V DIN/DO signal chaining
Details
SpeedyBee 2812 arm lights add bright red LED visibility on a droneโs arms for orientation during flights.
The SpeedyBee 2812 arm light board can connect to a flight controller either by soldering pads or using the plug-in connector leads.
SpeedyBee 2812 arm light strips can be daisy-chained in series using the connector or by soldering, with up to 8 strips (32 LEDs) supported.
SpeedyBee 2812 arm light uses DIN/DO pads plus 5V and GND connections for simple LED signal in/out wiring.
The SpeedyBee 2812 arm light comes in a compact 37mm x 6.5mm form factor with an approximate weight of 1.18g for lightweight installs.
The 2812 RGB LED specs list typical 120ยฐ viewing angle and wavelength ranges of 620โ625 nm (R), 525โ530 nm (G), and 465โ470 nm (B).
At IF=12mA, the LED specs list 200โ400 mcd for red/blue, 800โ1000 mcd for green, and wavelengths of 620โ625 nm (red), 525โ530 nm (green), and 465โ470 nm (blue).
The kit includes four LED strips, four 50mm 3-pin SH1.0 female cables, and four 35mm heat shrink tubes for a clean install.
Related Collections
