SpeedyBee Bee35 Meteor LED V2 LED Strip Kit + BEC Module, Bluetooth/WiFi UART, 126 LEDs, 785mm

Overview

SpeedyBee Bee35 Meteor LED V2 is an LED strip kit for FPV cinewhoop builds, combining a Meteor LED strip with a BEC module for wireless light-strip configuration and wireless flight controller (FC) configuration.

Key Features

• Wireless light strip configuration and wireless FC configuration via the module (Bluetooth automatically turns off one minute after power-up).
• Seven preset basic lighting effects, plus wireless customization of personal lighting styles through the app.
• Easy switch: change effects with the SpeedyBee App or by button control.
• Button control note: On/Off hold for 2 seconds; change effects press once.
• Customizable length; default length 78.5 cm (±5 mm). The LED strip can be spliced to meet different needs without affecting normal usage.
• Length reference for frame size: 3.5 inch / 3 inch / 2.5 inch.
• Easy installation: solder two wires for power. V connects to FC BAT; G connects to GND.
• UART configuration notes: to use wireless FC configuration, ensure the flight controller has a spare UART available; MSP for the relevant UART must be enabled (example illustrated with UART 1). T connects to flight controller RX; R connects to flight controller TX. Flight controllers with Bluetooth capability may not require connection of TX or RX.
• BOOT key initiation (DFU): pressing the button can enable the flight controller to enter DFU mode (only supports flight controllers with a BOOT pad/BOOT solder points). Operation: (1) press and hold the BEC button, (2) power up the drone, (3) plug in USB to enter DFU mode. B connects to flight controller BOOT.
• V2 app requirements: Android 2.2.5 or above; iOS 1.8.17 or above.

For installation or setup help, contact support@rcdrone.top or visit https://rcdrone.top/.

Specifications

BEC Module

Meteor LED

What's Included

• Meteor LED strip + BEC kit
• Mounting bracket (3D printed part)
• Screws
• Wire set and connector lead

Manuals

• V1 Manual (English)
• V1 Manual (Chinese)
• V2 Manual (English)
• V2 Manual (Chinese)
• 3D Print Files

Details

Meteor LED V2 supports wireless light strip and FC configuration with flexible strip length and app support for Android 2.2.5+ and iOS 1.8.17+.

The Bee35 Meteor LED V2 strip wraps around the frame to add bright, customizable accent lighting for your build.

SpeedyBee app support provides quick access to Betaflight tools like OSD setup, sensor status, and PID tuning from your phone.

The flexible LED strip comes in a 78.5cm (±5mm) default length and can be adjusted to fit 2.5, 3, or 3.5 inch frame layouts.

A built-in push button lets you turn the LEDs on or off with a 2-second hold and switch lighting effects with a single press.

The SpeedyBee Bee35 Meteor LED V2 strip adds bright, flexible accent lighting with multiple color effects for custom builds.

The SpeedyBee module works with Betaflight Configurator for DFU/STM32 bootloader firmware updates and quick connect control.

The Bee35 Meteor LED V2 module wires to the flight controller with simple BAT and GND power leads, with optional UART TX/RX for wireless configuration (MSP enabled).

The Meteor LED BEC module can be wired to the flight controller BOOT pads so holding the BEC button during power-up enters DFU mode.

The Meteor LED Strip + BEC kit includes a coiled RGB LED strip, BEC module, mounting plate, screws, and wiring leads for installation.