T-Hobby AMZ24*10 24x10 Carbon Fiber Propeller for 3D Planes, CF+Epoxy, 24inch Diameter 10inch Pitch

Overview

T-Hobby AMZ Series carbon fiber propeller (model AMZ24*10) designed for 3D planes. The manufacturer positions it for consistent aerobatic maneuver feel and fast power response.

Key Features

• AMZ Series carbon fiber propeller
• Material listed as CF+Epoxy
• Manufacturer-stated performance/response figures: 0.11s acceleration time, 0.17s deceleration time (comparison referenced to a normal carbon propeller)
• Manufacturer-stated improvement figures: 16% dynamic intensity, 22% fatigue intensity, 11% rudder efficiency, 9% improved aerodynamic efficiency
• Marking note (aerial view): “L” for CW, “R” for CCW

Specifications

Engineering Drawing (as shown)

What’s Included

• Packaging Box*1 (Volume: 690*80*35mm)
• Propeller*1
• Prop Bag*2

For customer service and order support, contact support@rcdrone.top or visit https://rcdrone.top/.

Applications

• 90"-96" 3D planes (70CC-80CC) (as shown)

Notes (from packaging)

• Use within the recommended maximum thrust range. Exceeding the limit may damage the propeller blades.
• Do not test blade strength by hand-bending.
• Ensure all accessories are mounted properly.
• Check the propellers before flight and ensure they are in good condition; replace if faults are found.
• Storage requirements: avoid corrosive gases and hazardous environments; maintain ambient conditions within -10°C to 50°C and relative humidity ≤85% RH.
• Apply medium-strength (or higher) screw locking glue when installing propellers onto motors.
• Use in compliance with local laws and regulations.

Details

The T-Hobby AMZ carbon fiber propeller features a woven carbon finish and clear size markings on each blade for quick identification during setup.

The T-Hobby AMZ 24x10 carbon fiber propeller is positioned as a power-system match for 90–96 in 3D aircraft, alongside AM910 190KV and AM216A ESC (5–14S) recommendations.

The AMZ24*10 propeller is listed as 24-inch diameter with 10-inch pitch, CF+epoxy construction, and a packing list that includes a box, one propeller, and two prop bags.