Note:

1. This is the assembled fpv drone.
2. Comes with a charger, receiver or transmitter.

Specification:

Brand name: TCMM RC
Model: Bee
Item Name: 2.5 Inch DIY FPV Racing Drone
Version: PNP (Without Receiver, Battery and Radio Transmitter)
Drone Wheelbase: 105mm
Arm Plate Thickness: 2mm
Max. Propeller: 2.5 Inch
Material: 3K Carbon Fiber & 3D Printed TPU Parts
Weight: 47.9g (without battery)
Eachine F411 OSD Vlucht Controller

F411 OSD Flight Controller
Main control chip: STM32F411

IMU: MPU6000

Integrated Betaflight OSD
Firmware: MatekF411

SBUS/ IBUS/ for DSMX / UART Shared: UART1-RX

BEC: 5V 2A
WS2812 Led Strip : Yes

Beeper : Yes
Mounting Hole: 20x20mm
- Support betaflight/ cleanflight/ inav firmware
- Plugs connector / Soldering Pads are Optional for all connector Port

20A BL_S 4In1 ESC
MCU:48MHz EFM8BB21F16G
Input Voltage: 2-6S
Con. Current: 20A
Burst Current: 25A (10S)
BEC: NO
Size: 28.7x30.7mm
Mounting Hole: 20x20mm
Weight: 24g
Support DShot150/300/600, PWM, OneShot125, OneShot42, MultiShot
( DShot600 in default out from factory)
1104 8600KV 2-3S Motor
KV: 8600KV

Lipo cell: 2-3S

Weight: 4.3g
Color: Orange
Max. Con. Current: 13A
Max. Con. po wer: 144W
Configu-ration: 9N/12P
Motor Resistance: 137mΩ
Stator Diameter: 11mm
Stator Thickness: 4mm
Motor Diameter: 13.8mm
Motor Body Length: 11.5mm
Overall Shaft Length: 17mm
Bolt Holes Spacing: 9mm
Bolt Thread: M2

65mm 2-Blade Propeller Item Name: 65mm 2-Blade Propeller
Shaft: 1.5mm
Quantity: 10 CW & 10 CCW
Color: Transparent Black / Black/ Red ( Sends Randomly )
Caddx Beetle V2 Camera AIO VTX Output po wer: 25mW
Channel: 48CH
Input Voltage: 2.9-5.5V
Support SmartAudio
VTX Size: 15x14mm
Image Sensor: 1/3 CMOS

Horizontal Resolution: 1200 TVL

TV System: PAL

Image: 4:3

Lens: 2.1mm

Dimensions: 14x14x16mm

Weight: 4.1g (Camera + VTX)

Recommend Lipo Battery ( Not Included) Recommend 3S 350-450mAh Lipo Battery




Package Included:

1x TCMM RC Tyro69 FPV Racing Drone

Racing Bee rocing drone TtjDS 30 F4 1104 Motor 3D printing parts Flight control system Easy to install paaameter descaiption Name Racing Bee Racing drone Weight 47.7g ( Without Battery Motor model 1104 8600kv Motor power Maximum continuous power of motor 144W Motor thrust Maximum thrust of motor 170g Fixed seat super tough tpu 3d printing Material of pure 3K carbon fiber Frame kit Camera Ultra-wide dynamic

Tcjbfc tcnttt Hho o Rack Frane Carbon Fiber Frame, Strong and Crashworthy, Fixed sezt Ultra WDR 120OTVL Camera AIO VTX, ultra-light,Tpu 3d printing,durable Zhoaeol and impact resistant .