OddityRC Vortex S100 100A 3-8S 4-in-1 ESC (BLS/Bluejay) w/ Current Sensor, 30.5x30.5mm

Overview

The OddityRC Vortex S100 is a 4-in-1 ESC designed for 3–8S builds, rated at 100A continuous with BLS/Bluejay firmware support. It uses a 30.5 x 30.5 mm mounting pattern and includes onboard current sensing for flight controller telemetry.

Key Features

• BLS/Bluejay firmware
• Input voltage: 3–8S
• 100A constant current, 120A burst current
• Current sensor: Yes
• Signal support: DShot, DShot150/300/600, MultiShot, OneShot, etc.
• Working temperature: -40 to 60 °C
• Board silkscreen labels include VBAT and GND, with motor output pads marked 1–4
• Onboard capacitors are marked “HV 220uF 50V”

Specifications

What’s Included

• OddityRC Vortex S100 4-in-1 ESC board
• 1x wiring harness (as shown)
• Mounting hardware set (screws and nuts)
• 1x X-shaped mounting/brace plate
• 2x XT60 power leads (as shown)

Applications

• FPV multirotor builds using a 30.5 x 30.5 mm stack pattern
• 3–8S setups requiring a high-current 4-in-1 ESC with current sensing

For wiring or setup assistance, contact support@rcdrone.top.

Details

Included in the box are the 4-in-1 ESC, wiring harness, mounting hardware, X-shaped brace plate, and two XT60 power leads for a clean 30.5×30.5mm stack build.