CADDXFPV Walksnail Avatar GT VTX Kit with Avatar HD Pro Camera, 2W Max, Dual Antennas, 1080P/100fps DVR, 11.1V-25.2V

Overview

CADDXFPV Walksnail Avatar GT VTX Kit is an FPV VTX kit built for long-range digital transmission. The kit integrates the Avatar GT video transmitter, dual antennas, and the Avatar HD Pro Camera to deliver up to 2W (within local legal limits), 1080p recording, and high-frame-rate low-latency FPV.

Key Features

Long-range, high-power VTX

Up to 2W output (subject to regional regulations) for extended signal transmission distance.

Wide input voltage

11.1V-25.2V power range simplifies installation across diverse airframes.

Dual-antenna architecture

Two IPEX antennas provide stronger, more stable links across the band.

Top-mounted heatsink and active cooling

Thermal design maintains performance during extended operation.

Integrated DVR with Micro SD

Onboard recording at 1080p or 720p to Micro SD cards up to 256GB.

High frame starlight camera

Avatar HD Pro Camera uses a 1/1.8-inch Sony Starvis II sensor for excellent night imaging; supports 1080P/100fps and 720P/120fps.

Low-latency digital FPV

Average delay 22ms with simultaneous support for high and standard frame rates.

Improved GPS interference resistance

Enhanced design for more stable flight links in challenging environments.

Internal ceramic antenna (low-power mode)

Optimizes performance while reducing heat and consumption when low-power is enabled.

Compatibility

Compatible with Moonlight Camera (DVR 4K). Canvas-mode OSD with major FC firmware.

Specifications

What’s Included

• 1 x Walksnail Avatar GT KIT
• 1 x Quick Guide
• 2 x M2*4mm screws
• 2 x M2*5mm screws
• 2 x M2*6mm screws
• 2 x M2*5*0.5mm spacer
• 2 x SD card stickers
• 1 x 4pin power cord

Applications

Long-range FPV builds requiring dual antennas, high-frame-rate digital video, onboard DVR, and night-capable imaging for freestyle, cinematic, and exploration flights.

For product questions or support, contact https://rcdrone.top/ or email support@rcdrone.top.

Notes

Observe local radio regulations before use. Check area for risk of use before flight. Ensure adequate airflow; the VTX generates heat during operation.

Details

Connection diagram for CADDXFPV Walksnail Avatar GT VTX. Output 5V for fan only; GND, Uart RX, Uart TX (spare pads). Input voltage 11.1V–25.2V; GND, Uart RX connects to FC TX, Uart TX connects to FC RX. Power consumption: 12V@1.5A — ensure power supply can handle this. VTX generates significant heat during operation; maintain proper airflow for cooling. Wires are color-coded: red for power, black for ground, white and gray for UART signals.

Walksnail Avatar GT Kit with VTX, antennas, cables, screws, and manual.